{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2026-10674", "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad", "state": "PUBLISHED", "assignerShortName": "zephyr", "dateReserved": "2026-06-02T15:26:03.742Z", "datePublished": "2026-07-21T21:30:53.643Z", "dateUpdated": "2026-07-22T19:37:08.367Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad", "shortName": "zephyr", "dateUpdated": "2026-07-21T21:30:53.643Z"}, "title": "DoS (hard fault) in NXP LPUART driver: unsupported runtime UART config leaves clocks disabled", "descriptions": [{"lang": "en", "value": "The NXP LPUART serial driver (drivers/serial/uart_mcux_lpuart.c), when CONFIG_UART_USE_RUNTIME_CONFIGURE is enabled, called LPUART_Deinit() at the start of mcux_lpuart_configure(), which disables the LPUART peripheral clocks. The requested configuration is validated only afterwards (in mcux_lpuart_configure_basic), and unsupported parity/data-bit/stop-bit/flow-control values return -ENOTSUP before the clock is re-enabled.\n\nAs a result, a uart_configure() request with an unsupported configuration left the LPUART in a clock-disabled state; any subsequent access to LPUART registers (poll_out/poll_in, interrupt handling, or a later reconfigure) faults on the gated peripheral and escalates to a hard fault, crashing the system.\n\nuart_configure() is a Zephyr syscall whose verifier (z_vrfy_uart_configure) only checks that cfg is readable user memory and forwards the caller-supplied configuration unchanged, so an unprivileged userspace thread with access to an LPUART device can deterministically trigger the fault, a persistent system-wide denial of service.\n\nIntroduced in v2.5.0 and present in all subsequent releases until this fix, which removes the LPUART_Deinit() call and instead only disables the transmitter/receiver, leaving the clock running."}], "affected": [{"vendor": "zephyrproject", "product": "zephyr", "collectionURL": "https://github.com/zephyrproject-rtos/zephyr", "packageName": "zephyr", "defaultStatus": "unaffected", "programFiles": ["drivers/serial/uart_mcux_lpuart.c"], "versions": [{"version": "3.7.0", "status": "affected", "lessThan": "4.5.0", "versionType": "semver"}]}], "references": [{"url": "https://github.com/zephyrproject-rtos/zephyr/commit/f56935c46fdf6559a20ad8484b29896ecac5808f", "name": "Fix commit", "tags": ["patch"]}, {"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-mw68-r353-m3vf", "name": "GHSA-mw68-r353-m3vf"}], "metrics": [{"format": "CVSS", "cvssV3_1": {"version": "3.1", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "baseScore": 5.5, "baseSeverity": "MEDIUM"}}], "problemTypes": [{"descriptions": [{"lang": "en", "description": "dos", "cweId": "CWE-617", "type": "CWE"}]}], "x_generator": {"engine": "cvelib 1.8.0"}}, "adp": [{"metrics": [{"other": {"type": "ssvc", "content": {"timestamp": "2026-07-22T19:32:08.144813Z", "id": "CVE-2026-10674", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "role": "CISA Coordinator", "version": "2.0.3"}}}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2026-07-22T19:37:08.367Z"}}]}}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CISA ADP Vulnrichment", "metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2026-10674", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2026-07-22T19:32:08.144813Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2026-07-22T19:32:09.531Z"}}], "cna": {"title": "DoS (hard fault) in NXP LPUART driver: unsupported runtime UART config leaves clocks disabled", "metrics": [{"format": "CVSS", "cvssV3_1": {"version": "3.1", "baseScore": 5.5, "baseSeverity": "MEDIUM", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H"}}], "affected": [{"vendor": "zephyrproject", "product": "zephyr", "versions": [{"status": "affected", "version": "3.7.0", "lessThan": "4.5.0", "versionType": "semver"}], "packageName": "zephyr", "programFiles": ["drivers/serial/uart_mcux_lpuart.c"], "collectionURL": "https://github.com/zephyrproject-rtos/zephyr", "defaultStatus": "unaffected"}], "references": [{"url": "https://github.com/zephyrproject-rtos/zephyr/commit/f56935c46fdf6559a20ad8484b29896ecac5808f", "name": "Fix commit", "tags": ["patch"]}, {"url": "https://github.com/zephyrproject-rtos/zephyr/security/advisories/GHSA-mw68-r353-m3vf", "name": "GHSA-mw68-r353-m3vf"}], "x_generator": {"engine": "cvelib 1.8.0"}, "descriptions": [{"lang": "en", "value": "The NXP LPUART serial driver (drivers/serial/uart_mcux_lpuart.c), when CONFIG_UART_USE_RUNTIME_CONFIGURE is enabled, called LPUART_Deinit() at the start of mcux_lpuart_configure(), which disables the LPUART peripheral clocks. The requested configuration is validated only afterwards (in mcux_lpuart_configure_basic), and unsupported parity/data-bit/stop-bit/flow-control values return -ENOTSUP before the clock is re-enabled.\n\nAs a result, a uart_configure() request with an unsupported configuration left the LPUART in a clock-disabled state; any subsequent access to LPUART registers (poll_out/poll_in, interrupt handling, or a later reconfigure) faults on the gated peripheral and escalates to a hard fault, crashing the system.\n\nuart_configure() is a Zephyr syscall whose verifier (z_vrfy_uart_configure) only checks that cfg is readable user memory and forwards the caller-supplied configuration unchanged, so an unprivileged userspace thread with access to an LPUART device can deterministically trigger the fault, a persistent system-wide denial of service.\n\nIntroduced in v2.5.0 and present in all subsequent releases until this fix, which removes the LPUART_Deinit() call and instead only disables the transmitter/receiver, leaving the clock running."}], "problemTypes": [{"descriptions": [{"lang": "en", "type": "CWE", "cweId": "CWE-617", "description": "dos"}]}], "providerMetadata": {"orgId": "e2e69745-5e70-4e92-8431-deb5529a81ad", "shortName": "zephyr", "dateUpdated": "2026-07-21T21:30:53.643Z"}}}, "cveMetadata": {"cveId": "CVE-2026-10674", "state": "PUBLISHED", "dateUpdated": "2026-07-22T19:37:08.367Z", "dateReserved": "2026-06-02T15:26:03.742Z", "assignerOrgId": "e2e69745-5e70-4e92-8431-deb5529a81ad", "datePublished": "2026-07-21T21:30:53.643Z", "assignerShortName": "zephyr"}, "dataVersion": "5.2"}

{}

{}

{"affected": [{"configurations": [{"platform": null, "status": "affected", "versions": {"scheme": "semver", "value": "[3.7.0,4.5.0)"}}], "enrichment": {"confidence": 100.0, "confidence_source": "matching", "scores": [{"score": 100.0, "source": "matching"}]}, "original": {"product": "zephyr", "source": "cna", "vendor": "zephyrproject"}, "product": "zephyr", "vendor": "zephyrproject"}], "created": "2026-07-22T19:45:16.862642+00:00", "updated": "2026-07-22T19:45:16.862668+00:00", "vendors": ["zephyrproject", "zephyrproject$PRODUCT$zephyr"]}