{"containers": {"cna": {"affected": [{"product": "Studio 5000 Logix Designer", "vendor": "Rockwell Automation", "versions": [{"status": "affected", "version": "All"}]}], "credits": [{"lang": "en", "value": "Sharon Brizinov and Tal Keren of Claroty reported this vulnerability to Rockwell Automation."}], "descriptions": [{"lang": "en", "value": "Rockwell Automation Studio 5000 Logix Designer (all versions) are vulnerable when an attacker who achieves administrator access on a workstation running Studio 5000 Logix Designer could inject controller code undetectable to a user."}], "metrics": [{"cvssV3_1": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.7, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "HIGH", "scope": "CHANGED", "userInteraction": "REQUIRED", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H", "version": "3.1"}}], "problemTypes": [{"descriptions": [{"cweId": "CWE-94", "description": "CWE-94 Improper Control of Generation of Code ('Code Injection')", "lang": "en", "type": "CWE"}]}], "providerMetadata": {"dateUpdated": "2022-04-01T22:17:51.000Z", "orgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6", "shortName": "icscert"}, "references": [{"tags": ["x_refsource_CONFIRM"], "url": "https://www.cisa.gov/uscert/ics/advisories/icsa-22-090-07"}], "source": {"advisory": "ICSA-22-090-07", "discovery": "UNKNOWN"}, "title": "Rockwell Automation Studio 5000 Logix Designer Code Injection", "workarounds": [{"lang": "en", "value": "Rockwell Automation recommends users of the affected hardware and software take risk mitigation steps listed below. Users are encouraged, when possible, to combine this guidance with the general security guidelines for a comprehensive defense-in-depth strategy.\n\nThere is no direct mitigation for this vulnerability in the Logix Designer application. However, a detection method is available to determine if the user program residing in the controller is identical to what was downloaded. This user program verification can be done by the following:\n\nOn-demand using the Logix Designer application Compare Tool v9 or later\nScheduled using FactoryTalk AssetCentre v12 or later user program verification (Available Fall 2022)\nTo leverage these detection capabilities, users are directed to upgrade to:\n\nStudio 5000 v34 software. or later\nCorresponding versions of Logix 5580, 5380, 5480, GuardLogix 5580 and Compact GuardLogix 5380 controller firmware.\nOne of the following compare tools\nLogix Designer application Compare Tool v9 or later \u2013 installed with Studio 5000 Logix Designer\nFactoryTalk AssetCentre v12 or later software (Available Fall 2022)\n\nThis user program comparison must be performed on an uncompromised workstation."}], "x_generator": {"engine": "Vulnogram 0.0.9"}, "x_legacyV4Record": {"CVE_data_meta": {"ASSIGNER": "ics-cert@hq.dhs.gov", "ID": "CVE-2022-1159", "STATE": "PUBLIC", "TITLE": "Rockwell Automation Studio 5000 Logix Designer Code Injection"}, "affects": {"vendor": {"vendor_data": [{"product": {"product_data": [{"product_name": "Studio 5000 Logix Designer", "version": {"version_data": [{"version_affected": "=", "version_value": "All"}]}}]}, "vendor_name": "Rockwell Automation"}]}}, "credit": [{"lang": "eng", "value": "Sharon Brizinov and Tal Keren of Claroty reported this vulnerability to Rockwell Automation."}], "data_format": "MITRE", "data_type": "CVE", "data_version": "4.0", "description": {"description_data": [{"lang": "eng", "value": "Rockwell Automation Studio 5000 Logix Designer (all versions) are vulnerable when an attacker who achieves administrator access on a workstation running Studio 5000 Logix Designer could inject controller code undetectable to a user."}]}, "generator": {"engine": "Vulnogram 0.0.9"}, "impact": {"cvss": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.7, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "HIGH", "scope": "CHANGED", "userInteraction": "REQUIRED", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H", "version": "3.1"}}, "problemtype": {"problemtype_data": [{"description": [{"lang": "eng", "value": "CWE-94 Improper Control of Generation of Code ('Code Injection')"}]}]}, "references": {"reference_data": [{"name": "https://www.cisa.gov/uscert/ics/advisories/icsa-22-090-07", "refsource": "CONFIRM", "url": "https://www.cisa.gov/uscert/ics/advisories/icsa-22-090-07"}]}, "source": {"advisory": "ICSA-22-090-07", "discovery": "UNKNOWN"}, "work_around": [{"lang": "en", "value": "Rockwell Automation recommends users of the affected hardware and software take risk mitigation steps listed below. Users are encouraged, when possible, to combine this guidance with the general security guidelines for a comprehensive defense-in-depth strategy.\n\nThere is no direct mitigation for this vulnerability in the Logix Designer application. However, a detection method is available to determine if the user program residing in the controller is identical to what was downloaded. This user program verification can be done by the following:\n\nOn-demand using the Logix Designer application Compare Tool v9 or later\nScheduled using FactoryTalk AssetCentre v12 or later user program verification (Available Fall 2022)\nTo leverage these detection capabilities, users are directed to upgrade to:\n\nStudio 5000 v34 software. or later\nCorresponding versions of Logix 5580, 5380, 5480, GuardLogix 5580 and Compact GuardLogix 5380 controller firmware.\nOne of the following compare tools\nLogix Designer application Compare Tool v9 or later \u2013 installed with Studio 5000 Logix Designer\nFactoryTalk AssetCentre v12 or later software (Available Fall 2022)\n\nThis user program comparison must be performed on an uncompromised workstation."}]}}, "adp": [{"providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2024-08-02T23:55:24.360Z"}, "title": "CVE Program Container", "references": [{"tags": ["x_refsource_CONFIRM", "x_transferred"], "url": "https://www.cisa.gov/uscert/ics/advisories/icsa-22-090-07"}]}, {"metrics": [{"other": {"type": "ssvc", "content": {"timestamp": "2025-04-16T17:30:26.084154Z", "id": "CVE-2022-1159", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "total"}], "role": "CISA Coordinator", "version": "2.0.3"}}}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2025-04-16T17:57:50.739Z"}}]}, "cveMetadata": {"assignerOrgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6", "assignerShortName": "icscert", "cveId": "CVE-2022-1159", "datePublished": "2022-04-01T22:17:51.000Z", "dateReserved": "2022-03-29T00:00:00.000Z", "dateUpdated": "2025-04-16T17:57:50.739Z", "state": "PUBLISHED"}, "dataType": "CVE_RECORD", "dataVersion": "5.1"}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CVE Program Container", "references": [{"url": "https://www.cisa.gov/uscert/ics/advisories/icsa-22-090-07", "tags": ["x_refsource_CONFIRM", "x_transferred"]}], "providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2024-08-02T23:55:24.360Z"}}, {"title": "CISA ADP Vulnrichment", "metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2022-1159", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "total"}], "version": "2.0.3", "timestamp": "2025-04-16T17:30:26.084154Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2025-04-16T17:30:27.891Z"}}], "cna": {"title": "Rockwell Automation Studio 5000 Logix Designer Code Injection", "source": {"advisory": "ICSA-22-090-07", "discovery": "UNKNOWN"}, "credits": [{"lang": "en", "value": "Sharon Brizinov and Tal Keren of Claroty reported this vulnerability to Rockwell Automation."}], "metrics": [{"cvssV3_1": {"scope": "CHANGED", "version": "3.1", "baseScore": 7.7, "attackVector": "LOCAL", "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H", "integrityImpact": "HIGH", "userInteraction": "REQUIRED", "attackComplexity": "LOW", "availabilityImpact": "HIGH", "privilegesRequired": "HIGH", "confidentialityImpact": "HIGH"}}], "affected": [{"vendor": "Rockwell Automation", "product": "Studio 5000 Logix Designer", "versions": [{"status": "affected", "version": "All"}]}], "references": [{"url": "https://www.cisa.gov/uscert/ics/advisories/icsa-22-090-07", "tags": ["x_refsource_CONFIRM"]}], "workarounds": [{"lang": "en", "value": "Rockwell Automation recommends users of the affected hardware and software take risk mitigation steps listed below. Users are encouraged, when possible, to combine this guidance with the general security guidelines for a comprehensive defense-in-depth strategy.\n\nThere is no direct mitigation for this vulnerability in the Logix Designer application. However, a detection method is available to determine if the user program residing in the controller is identical to what was downloaded. This user program verification can be done by the following:\n\nOn-demand using the Logix Designer application Compare Tool v9 or later\nScheduled using FactoryTalk AssetCentre v12 or later user program verification (Available Fall 2022)\nTo leverage these detection capabilities, users are directed to upgrade to:\n\nStudio 5000 v34 software. or later\nCorresponding versions of Logix 5580, 5380, 5480, GuardLogix 5580 and Compact GuardLogix 5380 controller firmware.\nOne of the following compare tools\nLogix Designer application Compare Tool v9 or later \u2013 installed with Studio 5000 Logix Designer\nFactoryTalk AssetCentre v12 or later software (Available Fall 2022)\n\nThis user program comparison must be performed on an uncompromised workstation."}], "x_generator": {"engine": "Vulnogram 0.0.9"}, "descriptions": [{"lang": "en", "value": "Rockwell Automation Studio 5000 Logix Designer (all versions) are vulnerable when an attacker who achieves administrator access on a workstation running Studio 5000 Logix Designer could inject controller code undetectable to a user."}], "problemTypes": [{"descriptions": [{"lang": "en", "type": "CWE", "cweId": "CWE-94", "description": "CWE-94 Improper Control of Generation of Code ('Code Injection')"}]}], "providerMetadata": {"orgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6", "shortName": "icscert", "dateUpdated": "2022-04-01T22:17:51.000Z"}, "x_legacyV4Record": {"credit": [{"lang": "eng", "value": "Sharon Brizinov and Tal Keren of Claroty reported this vulnerability to Rockwell Automation."}], "impact": {"cvss": {"scope": "CHANGED", "version": "3.1", "baseScore": 7.7, "attackVector": "LOCAL", "baseSeverity": "HIGH", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H", "integrityImpact": "HIGH", "userInteraction": "REQUIRED", "attackComplexity": "LOW", "availabilityImpact": "HIGH", "privilegesRequired": "HIGH", "confidentialityImpact": "HIGH"}}, "source": {"advisory": "ICSA-22-090-07", "discovery": "UNKNOWN"}, "affects": {"vendor": {"vendor_data": [{"product": {"product_data": [{"version": {"version_data": [{"version_value": "All", "version_affected": "="}]}, "product_name": "Studio 5000 Logix Designer"}]}, "vendor_name": "Rockwell Automation"}]}}, "data_type": "CVE", "generator": {"engine": "Vulnogram 0.0.9"}, "references": {"reference_data": [{"url": "https://www.cisa.gov/uscert/ics/advisories/icsa-22-090-07", "name": "https://www.cisa.gov/uscert/ics/advisories/icsa-22-090-07", "refsource": "CONFIRM"}]}, "data_format": "MITRE", "description": {"description_data": [{"lang": "eng", "value": "Rockwell Automation Studio 5000 Logix Designer (all versions) are vulnerable when an attacker who achieves administrator access on a workstation running Studio 5000 Logix Designer could inject controller code undetectable to a user."}]}, "problemtype": {"problemtype_data": [{"description": [{"lang": "eng", "value": "CWE-94 Improper Control of Generation of Code ('Code Injection')"}]}]}, "work_around": [{"lang": "en", "value": "Rockwell Automation recommends users of the affected hardware and software take risk mitigation steps listed below. Users are encouraged, when possible, to combine this guidance with the general security guidelines for a comprehensive defense-in-depth strategy.\n\nThere is no direct mitigation for this vulnerability in the Logix Designer application. However, a detection method is available to determine if the user program residing in the controller is identical to what was downloaded. This user program verification can be done by the following:\n\nOn-demand using the Logix Designer application Compare Tool v9 or later\nScheduled using FactoryTalk AssetCentre v12 or later user program verification (Available Fall 2022)\nTo leverage these detection capabilities, users are directed to upgrade to:\n\nStudio 5000 v34 software. or later\nCorresponding versions of Logix 5580, 5380, 5480, GuardLogix 5580 and Compact GuardLogix 5380 controller firmware.\nOne of the following compare tools\nLogix Designer application Compare Tool v9 or later \u2013 installed with Studio 5000 Logix Designer\nFactoryTalk AssetCentre v12 or later software (Available Fall 2022)\n\nThis user program comparison must be performed on an uncompromised workstation."}], "data_version": "4.0", "CVE_data_meta": {"ID": "CVE-2022-1159", "STATE": "PUBLIC", "TITLE": "Rockwell Automation Studio 5000 Logix Designer Code Injection", "ASSIGNER": "ics-cert@hq.dhs.gov"}}}}, "cveMetadata": {"cveId": "CVE-2022-1159", "state": "PUBLISHED", "dateUpdated": "2025-04-16T17:57:50.739Z", "dateReserved": "2022-03-29T00:00:00.000Z", "assignerOrgId": "7d14cffa-0d7d-4270-9dc0-52cabd5a23a6", "datePublished": "2022-04-01T22:17:51.000Z", "assignerShortName": "icscert"}, "dataVersion": "5.1"}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:rockwellautomation:controllogix_5580_firmware:*:*:*:*:*:*:*:*", "matchCriteriaId": "D1B751BB-5C55-46BD-A15D-CCCA9699FC5D", "vulnerable": true}], "negate": false, "operator": "OR"}, {"cpeMatch": [{"criteria": "cpe:2.3:h:rockwellautomation:controllogix_5580:-:*:*:*:*:*:*:*", "matchCriteriaId": "51BB883B-B863-4D57-B1C0-FC7B3EBD1EA0", "vulnerable": false}], "negate": false, "operator": "OR"}], "operator": "AND"}, {"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:rockwellautomation:guardlogix_5580_firmware:*:*:*:*:*:*:*:*", "matchCriteriaId": "1829B090-7E73-4712-8235-F4C8D53D229F", "vulnerable": true}], "negate": false, "operator": "OR"}, {"cpeMatch": [{"criteria": "cpe:2.3:h:rockwellautomation:guardlogix_5580:-:*:*:*:*:*:*:*", "matchCriteriaId": "006B7683-9FDF-4748-BA28-2EA22613E092", "vulnerable": false}], "negate": false, "operator": "OR"}], "operator": "AND"}, {"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:rockwellautomation:compactlogix_5380_firmware:*:*:*:*:*:*:*:*", "matchCriteriaId": "D6164C08-2D51-4926-8724-DBB6F15AFF8E", "vulnerable": true}], "negate": false, "operator": "OR"}, {"cpeMatch": [{"criteria": "cpe:2.3:h:rockwellautomation:compactlogix_5380:-:*:*:*:*:*:*:*", "matchCriteriaId": "EDD040ED-B44C-47D0-B4D4-729C378C4F68", "vulnerable": false}], "negate": false, "operator": "OR"}], "operator": "AND"}, {"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:rockwellautomation:compactlogix_5480_firmware:*:*:*:*:*:*:*:*", "matchCriteriaId": "CB52219D-FA84-436A-9985-CC213FB0CA8E", "vulnerable": true}], "negate": false, "operator": "OR"}, {"cpeMatch": [{"criteria": "cpe:2.3:h:rockwellautomation:compactlogix_5480:-:*:*:*:*:*:*:*", "matchCriteriaId": "80F4F5BE-07DF-402A-BF98-34FBA6A11968", "vulnerable": false}], "negate": false, "operator": "OR"}], "operator": "AND"}, {"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:rockwellautomation:compact_guardlogix_5380_firmware:*:*:*:*:*:*:*:*", "matchCriteriaId": "F84096B0-5D14-408A-ACB6-E16B23D01DB5", "vulnerable": true}], "negate": false, "operator": "OR"}, {"cpeMatch": [{"criteria": "cpe:2.3:h:rockwellautomation:compact_guardlogix_5380:-:*:*:*:*:*:*:*", "matchCriteriaId": "62414E65-73C7-4172-B7BF-F40A66AFBB90", "vulnerable": false}], "negate": false, "operator": "OR"}], "operator": "AND"}], "descriptions": [{"lang": "en", "value": "Rockwell Automation Studio 5000 Logix Designer (all versions) are vulnerable when an attacker who achieves administrator access on a workstation running Studio 5000 Logix Designer could inject controller code undetectable to a user."}, {"lang": "es", "value": "Rockwell Automation Studio 5000 Logix Designer (todas las versiones) son vulnerables cuando un atacante que logra acceso de administrador en una estaci\u00f3n de trabajo que ejecuta Studio 5000 Logix Designer podr\u00eda inyectar c\u00f3digo de controlador no detectable para un usuario"}], "id": "CVE-2022-1159", "lastModified": "2024-11-21T06:40:09.400", "metrics": {"cvssMetricV2": [{"acInsufInfo": false, "baseSeverity": "MEDIUM", "cvssData": {"accessComplexity": "LOW", "accessVector": "NETWORK", "authentication": "SINGLE", "availabilityImpact": "PARTIAL", "baseScore": 6.5, "confidentialityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "vectorString": "AV:N/AC:L/Au:S/C:P/I:P/A:P", "version": "2.0"}, "exploitabilityScore": 8.0, "impactScore": 6.4, "obtainAllPrivilege": false, "obtainOtherPrivilege": false, "obtainUserPrivilege": false, "source": "nvd@nist.gov", "type": "Primary", "userInteractionRequired": false}], "cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.7, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "HIGH", "scope": "CHANGED", "userInteraction": "REQUIRED", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:C/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.1, "impactScore": 6.0, "source": "ics-cert@hq.dhs.gov", "type": "Secondary"}, {"cvssData": {"attackComplexity": "LOW", "attackVector": "NETWORK", "availabilityImpact": "HIGH", "baseScore": 7.2, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "HIGH", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.2, "impactScore": 5.9, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2022-04-01T23:15:12.813", "references": [{"source": "ics-cert@hq.dhs.gov", "tags": ["Mitigation", "Third Party Advisory", "US Government Resource"], "url": "https://www.cisa.gov/uscert/ics/advisories/icsa-22-090-07"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Mitigation", "Third Party Advisory", "US Government Resource"], "url": "https://www.cisa.gov/uscert/ics/advisories/icsa-22-090-07"}], "sourceIdentifier": "ics-cert@hq.dhs.gov", "vulnStatus": "Modified", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-94"}], "source": "ics-cert@hq.dhs.gov", "type": "Secondary"}, {"description": [{"lang": "en", "value": "CWE-94"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{}