Search
Search Results (19 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64556 | 1 Linux | 1 Linux Kernel | 2026-07-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Detach event groups during remove_on_exec perf_event_remove_on_exec() removes events by calling perf_event_exit_event(). For top-level events, this removes the event from the context with DETACH_EXIT only. This can leave inconsistent group state when a removed event is a group leader and the group contains siblings without remove_on_exec. If the group was active, the surviving siblings can remain active and attached to the removed leader's sibling list, but are no longer represented by a valid group leader on the PMU context active lists. A later close of the removed leader uses DETACH_GROUP and can promote the still-active siblings from this stale group state. The next schedule-in can then add an already-linked active_list entry again, corrupting the PMU context active list. With DEBUG_LIST enabled, this is caught as a list_add double-add in merge_sched_in(). Fix this by detaching group relationships when remove_on_exec removes an event. This preserves the existing task-exit and revoke behavior, while ensuring surviving siblings are ungrouped before the removed event leaves the context. | ||||
| CVE-2026-63988 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in sysfs path Since the start of the git history, brport_store() always acquired the bridge lock. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function was only used by two STP related attributes (cost and priority). Nowadays, brport_store() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port: Only requires RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the two STP related attributes that require it. Remove the now stale comment from br_switchdev_set_port_flag(). The SWITCHDEV_F_DEFER flag can be removed in net-next. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 5 locks held by bash/372: #0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740) #1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343) #2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344) #3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326) #4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235) brport_store (net/bridge/br_sysfs_if.c:346) kernfs_fop_write_iter (fs/kernfs/file.c:352) new_sync_write (fs/read_write.c:595) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | ||||
| CVE-2026-64428 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: sch: use raw_spinlock_t in the irq startup path sch_irq_unmask() enables the GPIO IRQ and then updates the controller state through sch_irq_mask_unmask(), which takes sch->lock with spin_lock_irqsave(). The callback can be reached from irq_startup() while setting up a requested IRQ. That path is not sleepable, but on PREEMPT_RT a regular spinlock_t becomes a sleeping lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the request_threaded_irq() -> __setup_irq() -> irq_startup() -> sch_irq_unmask() -> sch_irq_mask_unmask() carrier and used the original spin_lock_irqsave(&sch->lock) edge. Lockdep reported: BUG: sleeping function called from invalid context hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv] sch_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv] sch_irq_mask_unmask.constprop.0+0x31/0x70 [vuln_msv] __setup_irq.constprop.0+0xd/0x30 [vuln_msv] Convert the SCH controller lock to raw_spinlock_t. The same lock is also used by the GPIO direction and value callbacks, but those critical sections only update MMIO-backed GPIO registers and do not contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. | ||||
| CVE-2026-64429 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: eic-sprd: use raw_spinlock_t in the irq startup path sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller state through sprd_eic_update(), which takes sprd_eic->lock with spin_lock_irqsave(). The callback can be reached from irq_startup() while setting up a requested IRQ. That path is not sleepable, but on PREEMPT_RT a regular spinlock_t becomes a sleeping lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the request_threaded_irq() -> __setup_irq() -> irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier and used the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep BUG: sleeping function called from invalid context hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv] sprd_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv] sprd_eic_update.constprop.0+0x48/0x90 [vuln_msv] sprd_eic_irq_unmask.constprop.0+0x35/0x50 [vuln_msv] __setup_irq.constprop.0+0xd/0x30 [vuln_msv] Convert the Spreadtrum EIC controller lock to raw_spinlock_t. The locked section only serializes MMIO register updates and does not contain sleepable operations, so keeping it non-sleeping is appropriate for the irqchip callbacks. | ||||
| CVE-2026-64472 | 1 Linux | 1 Linux Kernel | 2026-07-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/mlx5: Fix racy bitfields and tighten struct layout Bitfield operations are not atomic, they use a read-modify-write pattern, therefore we should be careful not to pack bitfields that can be concurrently updated into the same storage unit. This split takes a binary approach: flags that are only modified pre/post open/close remain bitfields, flags modified from user action, including actions that reach across to another device (ex. reset) use dedicated storage units. Note mlx5_vhca_page_tracker.status is relocated to fill the alignment hole this split exposes. Bitfield justifications: migrate_cap: written only in mlx5vf_cmd_set_migratable() at probe chunk_mode: written only in mlx5vf_cmd_set_migratable() at probe mig_state_cap: written only in mlx5vf_cmd_set_migratable() at probe Dedicated storage units: mdev_detach: written in the VF attach/detach event notifier mlx5fv_vf_event() at runtime log_active: written in mlx5vf_start_page_tracker()/ mlx5vf_stop_page_tracker() during runtime dirty tracking deferred_reset: written in mlx5vf_state_mutex_unlock()/ mlx5vf_pci_aer_reset_done() during runtime reset handling is_err: set by tracker error handling and dirty-log polling at runtime object_changed: set by tracker event handling and cleared by dirty-log polling at runtime | ||||
| CVE-2026-63865 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks bpf_lsm_task_to_inode() is called under rcu_read_lock() and bpf_lsm_inet_conn_established() is called from softirq context, so neither hook can be used by sleepable LSM programs. | ||||
| CVE-2026-64419 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show() Reading the debugfs "count" file of a memcg-aware shrinker can sleep inside an RCU read-side critical section: BUG: sleeping function called from invalid context at kernel/cgroup/rstat.c:421 RCU nest depth: 1, expected: 0 css_rstat_flush mem_cgroup_flush_stats zswap_shrinker_count shrinker_debugfs_count_show shrinker_debugfs_count_show() invokes the ->count_objects() callback under rcu_read_lock(). The zswap callback flushes memcg stats via css_rstat_flush(), which may sleep, so it must not run under RCU. The RCU lock is not needed here. mem_cgroup_iter() takes RCU internally and returns a memcg holding a css reference (dropped on the next iteration or by mem_cgroup_iter_break()), so the memcg stays alive without it. The shrinker is kept alive by the open debugfs file: shrinker_free() removes the debugfs entries via debugfs_remove_recursive(), which waits for in-flight readers to drain, before call_rcu(..., shrinker_free_rcu_cb). The sibling "scan" handler already invokes the sleeping ->scan_objects() callback with no RCU section. Drop the rcu_read_lock()/rcu_read_unlock(). | ||||
| CVE-2026-64454 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: run gadget disconnect from sleepable suspend context dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls dwc3_disconnect_gadget(). For async callbacks that helper only uses plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback still runs with IRQs disabled and any sleepable callback trips Lockdep. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the dwc3_gadget_suspend() -> dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and Lockdep reported: BUG: sleeping function called from invalid context gadget_disconnect+0x21/0x39 [vuln_msv] dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv] Keep the disconnect callback selection in one common helper, but add a sleepable suspend-side wrapper which snapshots the callback under dwc->lock and then runs it after spin_unlock_irqrestore(). The regular event path still uses the existing spin_unlock()/spin_lock() window. | ||||
| CVE-2026-64164 | 1 Linux | 1 Linux Kernel | 2026-07-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file() The trace event btrfs_sync_file() is called in an atomic context (all trace events are) and its call to dput(), which is needed due to the call to dget_parent(), can sleep, triggering a kernel splat. This can be reproduced by enabling the trace event and running btrfs/056 from fstests for example. The splat shown in dmesg is the following: [53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970 [53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io [53.988] preempt_count: 2, expected: 0 [53.967] RCU nest depth: 0, expected: 0 [53.943] Preemption disabled at: [53.944] [<0000000000000000>] 0x0 [54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full) [54.070] Tainted: [W]=WARN [54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [54.072] Call Trace: [54.074] <TASK> [54.076] dump_stack_lvl+0x56/0x80 [54.079] __might_resched.cold+0xd6/0x10f [54.072] dput.part.0+0x24/0x110 [54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs] [54.089] btrfs_sync_file+0x1ed/0x530 [btrfs] [54.087] ? __handle_mm_fault+0x8ae/0xed0 [54.089] btrfs_do_write_iter+0x172/0x210 [btrfs] [54.091] vfs_write+0x21f/0x450 [54.094] __x64_sys_pwrite64+0x8d/0xc0 [54.096] ? do_user_addr_fault+0x20c/0x670 [54.099] do_syscall_64+0x60/0xf20 [54.092] ? clear_bhb_loop+0x60/0xb0 [54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e So stop using dget_parent() and dput() and access the parent dentry directly as dentry->d_parent. This is also what ext4 is doing in its equivalent trace event ext4_sync_file_enter(). | ||||
| CVE-2026-43010 | 1 Linux | 1 Linux Kernel | 2026-07-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable kprobe_multi programs at attach time kprobe.multi programs run in atomic/RCU context and cannot sleep. However, bpf_kprobe_multi_link_attach() did not validate whether the program being attached had the sleepable flag set, allowing sleepable helpers such as bpf_copy_from_user() to be invoked from a non-sleepable context. This causes a "sleeping function called from invalid context" splat: BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 0 Fix this by rejecting sleepable programs early in bpf_kprobe_multi_link_attach(), before any further processing. | ||||
| CVE-2026-53285 | 1 Linux | 1 Linux Kernel | 2026-06-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED [Why] dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(), which disables local softirqs. The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path, which calls BUG_ON(in_interrupt()) because it's invoked within the FPU-enabled (softirq disabled) region, leading to a kernel crash. [How] Wrap the dc_state_create_phantom_plane() call with the DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during this memory allocation. (cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) | ||||
| CVE-2026-53114 | 1 Linux | 1 Linux Kernel | 2026-06-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler Calling perf_allow_kernel() from the NMI context is unsafe and could be fatal. Capture the permission at event-initialization time by storing it in event->hw.flags, and have the NMI handler rely on that cached flag instead of making the call directly. | ||||
| CVE-2026-53107 | 1 Linux | 1 Linux Kernel | 2026-06-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: don't kill URBs in interrupt context Serialization for the TX path was enforced by calling usb_kill_urb()/usb_kill_anchored_urbs(), to prevent transmission before a previous URB was completed. usb_tx_block() can be called from interrupt context (e.g. in the HCD giveback path), so we can't always use it to kill in-flight URBs. Prevent sleeping during interrupt context by checking the tx_submitted anchor for existing URBs. We now return -EBUSY, to indicate there's a pending request. | ||||
| CVE-2026-43423 | 1 Linux | 1 Linux Kernel | 2026-06-17 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-46290 | 1 Linux | 1 Linux Kernel | 2026-06-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/efi: Fix graceful fault handling after FPU softirq changes Since commit d02198550423 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin() calls fpregs_lock() which uses local_bh_disable() instead of the previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count during the entire EFI runtime service call, causing in_interrupt() to return true in normal task context. The graceful page fault handler efi_crash_gracefully_on_page_fault() uses in_interrupt() to bail out for faults in real interrupt context. With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI firmware page faults unhandled. This escalates to die() which also sees in_interrupt() as true and calls panic("Fatal exception in interrupt"), resulting in a hard system freeze. On systems with buggy firmware that triggers page faults during EFI runtime calls (e.g., accessing unmapped memory in GetTime()), this causes an unrecoverable hang instead of the expected graceful EFI_ABORTED recovery. Fix by replacing in_interrupt() with !in_task(). This preserves the original intent of bailing for interrupts or NMI faults, while no longer falsely triggering from the FPU code path's local_bh_disable(). [ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a window where a softirq may be taken before fpregs_lock() is called, but after efi_rts_work.efi_rts_id has been assigned, and any page faults occurring in that window will then be misidentified as having been caused by the firmware. Instead, use !in_task(), which incorporates in_serving_softirq(). ] | ||||
| CVE-2026-28379 | 1 Grafana | 1 Grafana | 2026-06-02 | 6.5 Medium |
| A race condition in Grafana Live allows authenticated users with Viewer role to trigger a server crash by sending concurrent requests that cause a fatal map access error. This results in complete service unavailability requiring restart of the Grafana server. | ||||
| CVE-2026-43170 | 1 Linux | 1 Linux Kernel | 2026-05-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Move vbus draw to workqueue context Currently dwc3_gadget_vbus_draw() can be called from atomic context, which in turn invokes power-supply-core APIs. And some these PMIC APIs have operations that may sleep, leading to kernel panic. Fix this by moving the vbus_draw into a workqueue context. | ||||
| CVE-2026-43180 | 1 Linux | 1 Linux Kernel | 2026-05-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls netif_stop_queue() and netif_wake_queue(). These are TX queue flow control functions unrelated to RX multicast configuration. The premature netif_wake_queue() can re-enable TX while tx_urb is still in-flight, leading to a double usb_submit_urb() on the same URB: kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); } kaweth_set_rx_mode() { netif_stop_queue(); netif_wake_queue(); // wakes TX queue before URB is done } kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); // URB submitted while active } This triggers the WARN in usb_submit_urb(): "URB submitted while active" This is a similar class of bug fixed in rtl8150 by - commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast"). Also kaweth_set_rx_mode() is already functionally broken, the real set_rx_mode action is performed by kaweth_async_set_rx_mode(), which in turn is not a no-op only at ndo_open() time. | ||||
| CVE-2026-26201 | 1 Jm33-m0 | 1 Emp3r0r | 2026-04-17 | 7.5 High |
| emp3r0r is a C2 designed by Linux users for Linux environments. Prior to version 3.21.2, multiple shared maps are accessed without consistent synchronization across goroutines. Under concurrent activity, Go runtime can trigger `fatal error: concurrent map read and map write`, causing C2 process crash (availability loss). Version 3.21.2 fixes this issue. | ||||
Page 1 of 1.