| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue was discovered in OpenStack oslo.messaging 1.0.0 through 17.3.0. The oslo.messaging RabbitMQ driver does not perform TLS hostname verification when connecting to the message broker. When ssl_ca_file is configured, the driver enables certificate chain validation but does not pass the expected broker hostname into the underlying TLS stack. Any certificate signed by the deployment CA is accepted regardless of hostname, allowing an attacker who can intercept control-plane traffic to impersonate the RabbitMQ broker and perform a man-in-the-middle attack on RPC and notification traffic. All OpenStack services using oslo.messaging with RabbitMQ over TLS are affected. |
| IBM WebSphere Application Server 9.0, and 8.5 is vulnerable to identity spoofing. |
| A network man-in-the-middle between nats-sync and the BOSH director can steal the director credentials (Basic auth header or UAA client secret) and can tamper with the VM list that is written into the NATS authorization file. Stolen credentials grant administrative director access. UsersSync#bosh_api_response_body builds a Net::HTTP client with verify_mode = OpenSSL::SSL::VERIFY_NONE for every director call (/info, /deployments, /deployments/<name>/vms).
Affected versions:
- BOSH: all versions prior to v282.1.9 (inclusive); fixed in v282.1.9 or later |
| A flaw was found in Keycloak. This authentication vulnerability allows a remote attacker to replay `ExecuteActionsActionToken` tokens within Keycloak's WebAuthn (Web Authentication) flow. By intercepting an execute-actions email link, an attacker can register their own authenticator to a victim's account. This leads to unauthorized enrollment of a hardware-backed credential, enabling persistent account takeover. |
| A session fixation vulnerability was found in Keycloak's login-actions endpoints. An unauthenticated attacker could exploit this flaw by pre-creating an authentication session and tricking a victim into visiting a maliciously crafted link. By leveraging the /login-actions/restart endpoint—which processes session handles without adequate CSRF protection or cookie ownership validation—an attacker can reset the authentication flow state. This causes Single Sign-On (SSO) to authenticate the victim transparently upon clicking the link, allowing the attacker to hijack the required-action form without needing the victim's credentials. A successful exploit could lead to complete account takeover, including highly privileged administrative accounts. |
| It was identified that the LDAP client implementation in version 2.1.7 does not verify if the server certificate matches the intended LDAP
hostname. While the underlying code validates the certificate chain
against a trusted authority, the absence of endpoint identification
allows a valid certificate issued for an entirely unrelated host to be
improperly accepted. This oversight leaves the connection highly
vulnerable to server impersonation and complete connection compromise.
The
root cause of this vulnerability lies in the incomplete TLS server
identity verification within the LDAP client implementation.
The attacker requires MITM capability on the network to exploit this vulnerability. This attacker must be able to present a certificate trusted by the client's configured trust store.
The hostname verification has been enforced in the new version of the LDAP API |
| Apache Airflow's EmailOperator and the underlying `airflow.utils.email` helpers established SMTP STARTTLS connections without verifying the remote certificate when the deployment used `[email] smtp_starttls=True` without `[email] smtp_ssl`. An attacker positioned between the worker and the configured SMTP server (network MITM — typical hostile-network attack-surface for environments where the SMTP relay sits outside the worker's trust boundary) could present a self-signed certificate, have the worker complete the STARTTLS handshake silently, and capture the SMTP AUTH credentials and message contents the worker forwarded.
This CVE covers the **core apache-airflow side** of the same root cause already covered for the SMTP provider by `CVE-2026-41016` (published 2026-04-27, covering `apache-airflow-providers-smtp`). Users who already applied the SMTP-provider fix from CVE-2026-41016 should additionally upgrade `apache-airflow` to 3.2.2 or later to cover the core-side path through `airflow.utils.email`. Affects deployments configured with `smtp_starttls=True` and `smtp_ssl=False` where the SMTP relay is reachable across a less-trusted network segment than the worker.
Users are advised to upgrade to `apache-airflow` 3.2.2 or later. |
| Authentication bypass by capture-replay vulnerability exists in Machine automation controller NX7 series all models V1.28 and earlier, Machine automation controller NX1 series all models V1.48 and earlier, and Machine automation controller NJ series all models V 1.48 and earlier, which may allow an adjacent attacker who can analyze the communication between the controller and the specific software used by OMRON internally to cause a denial-of-service (DoS) condition or execute a malicious program. |
| In Omron PLC CJ series, all versions, and Omron PLC CS series, all versions, an attacker could monitor traffic between the PLC and the controller and replay requests that could result in the opening and closing of industrial valves. |
| Authentication Bypass by Spoofing vulnerability in AAM Plugin Advanced Access Manager allows URL Encoding.
This issue affects Advanced Access Manager: from n/a through 7.1.0. |
| Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_ocsp module) allows forged OCSP responses signed with an expired responder certificate to be accepted as valid.
OCSP response verification in pubkey_ocsp:verify_response/5 and pubkey_ocsp:is_authorized_responder/3 in lib/public_key/src/pubkey_ocsp.erl does not check the validity period (notBefore/notAfter) of the OCSP responder certificate. An attacker who has obtained the private key of an expired CA-designated OCSP responder certificate can forge OCSP responses that Erlang/OTP accepts as valid.
This affects TLS clients using OCSP stapling via the ssl application: a malicious or compromised server can present a revoked TLS certificate together with a forged OCSP response signed by an expired responder key, and the client will accept the revoked certificate as valid. It also affects applications calling public_key:pkix_ocsp_validate/5 directly, where the impact depends on the use case — server-side client certificate validation using this API may allow authentication bypass with a revoked client certificate.
This issue affects OTP from OTP 27.0 before OTP 27.3.4.12, 28.5.0.1, and 29.0.1 corresponding to public_key from 1.16 before 1.17.1.3, 1.20.3.1, and 1.21.1. |
| Microsoft UFO open-source framework for intelligent automation across devices and platforms. In 3.0.1-4-ge2626659, Microsoft UFO's WebSocket control plane trusts client-supplied identity and role fields in task messages. A client connection can register as a normal device, but later send a TASK message claiming client_type="constellation" and target_id=<victim-device-id>. The server trusts the role and target values from the wire message rather than enforcing the role registered for that WebSocket connection. As a result, any authenticated WebSocket client with the shared server token can spoof the higher-privilege constellation role and dispatch attacker-controlled tasks to another connected device. The same client registry also allows duplicate client_id registration, overwriting an existing live client's stored websocket, role, and task protocol. This is an authenticated WebSocket role/identity spoofing issue leading to peer task hijacking. |
| When an SSH server authentication callback returned PartialSuccessError with non-nil Permissions, those permissions were silently discarded, potentially dropping certificate restrictions such as force-command after a second factor succeeded. Returning non-nil Permissions with PartialSuccessError now results in a connection error. |
| A flaw was found in gnutls. This vulnerability occurs because permitted name constraints were incorrectly ignored when previous Certificate Authorities (CAs) only had excluded name constraints. A remote attacker could exploit this to bypass critical name constraint checks during certificate validation. This bypass could lead to the acceptance of invalid certificates, potentially enabling spoofing or man-in-the-middle attacks against affected systems. |
| A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted certificate that contains Uniform Resource Identifier (URI) or Service (SRV) Subject Alternative Names (SANs). This could cause the certificate validation process to incorrectly fall back to checking DNS hostnames against the Common Name (CN), potentially allowing the attacker to spoof legitimate services or intercept sensitive information. |
| Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_cert and public_key modules) allows a DNS nameConstraints bypass via subject CommonName fallback in TLS hostname verification.
Two flaws combine to allow a subordinate CA whose DNS nameConstraints are restricted (e.g. permitted;DNS:allowed.example.com) to issue a leaf certificate that an OTP TLS client accepts as a valid identity for an out-of-scope hostname (e.g. victim.example.com):
First, pubkey_cert:validate_names/6 in lib/public_key/src/pubkey_cert.erl only checks SAN DNS entries against nameConstraints. Per RFC 5280, a permitted DNS subtree only restricts certificates that contain a DNS-typed name. A leaf with no subjectAltName therefore trivially satisfies any permitted;DNS:... constraint regardless of its subject commonName.
Second, public_key:pkix_verify_hostname/3 in lib/public_key/src/public_key.erl falls back to the subject commonName when no subjectAltName is present, extracting id-at-commonName attributes as presented IDs and matching them against the reference hostname. The strict pkix_verify_hostname_match_fun(https) matcher does not suppress this fallback.
The result is that path validation accepts a CN-only leaf under a DNS-constrained intermediate (no SAN means the nameConstraints are not triggered), and hostname verification then accepts it via the CN fallback. The bypass is reachable from stock ssl:connect with verify_peer, a trusted CA, SNI, and the canonical strict https hostname matcher.
This issue affects OTP from OTP 19.3 before OTP 26.2.5.21, 27.3.4.12, 28.5.0.1, and 29.0.1 corresponding to public_key from 1.4 before 1.15.1.7, 1.17.1.3, 1.20.3.1, and 1.21.1. |
| The Claude Desktop app gives you Claude Code with a graphical interface built for running multiple sessions side by side. From 1.2581.0 to before 1.4304.0, Claude Desktop's SSH remote development feature verified only whether a hostname existed in ~/.ssh/known_hosts without comparing the server's presented host key against the stored key. This allowed a network-positioned attacker to present an arbitrary SSH host key and have the connection silently accepted, enabling a man-in-the-middle attack on remote development sessions. Successful exploitation required the attacker to be in a network position to intercept SSH traffic (e.g., via ARP spoofing, rogue Wi-Fi, or DNS poisoning) and the target hostname to already have an entry in the victim's known_hosts file. This vulnerability is fixed in 1.4304.0. |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. Prior to 1.8.220, the email processing pipeline in FreeScout's FetchEmails command has two code paths for identifying agent (user) replies based on In-Reply-To / References headers. The notification reply path (notify-{thread_id}-{user_id}-...) extracts thread_id and user_id directly from the Message-ID without HMAC verification. An external attacker who can spoof the From address of a helpdesk agent can inject messages that FreeScout processes as legitimate agent replies — which are then automatically forwarded to customers via the legitimate SMTP server. This vulnerability is fixed in 1.8.220. |
| SillyTavern is a locally installed user interface that allows users to interact with text generation large language models, image generation engines, and text-to-speech voice models. Prior to 1.18.0, SillyTavern accepts Remote-User (Authelia) and X-Authentik-Username (Authentik) HTTP headers to automatically log in users when SSO is configured. There is no validation that these headers originate from a trusted reverse proxy. Any network client that can reach the SillyTavern port directly can inject these headers and authenticate as any user, including administrators, without a password. This vulnerability is exploitable only when sso.autheliaAuth: true or sso.authentikAuth: true is set in config.yaml (both default to false). This vulnerability is fixed in 1.18.0. |
| azureauthextension is the Azure Authenticator Extension. From 0.124.0 to 0.150.0, a server-side authentication bypass in azureauthextension allows any party who holds a single valid Azure access token for any scope the collector's configured identity can mint for to authenticate to any OpenTelemetry receiver that uses auth: azure_auth. The extension's Authenticate method does not validate incoming bearer tokens as JWTs. Instead, it calls its own configured credential to obtain an access token and compares the client's token to the result with string equality — and the scope for that server-side token request is taken from the client-supplied Host header. As a result, a token minted for any Azure resource the service principal has ever been issued a token for (ARM, Graph, Key Vault, Storage, etc.) will authenticate to the collector if the attacker picks a matching Host. Tokens are replayable for the full issued lifetime (commonly several hours for managed identity tokens). |
