| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in GLib. An off-by-one error can occur in the gvs_tuple_is_normal function in the glib/gvariant-serialiser.c file when doing an alignment padding check because the bounds check uses > instead of >=, causing an out-of-bounds read of only 1 byte. This issue can cause a minor information disclosure of 1 byte and a denial of service when the out-of-bounds read crosses a page boundary. |
| A flaw was found in binutils. A heap-buffer-overflow vulnerability exists when processing a specially crafted XCOFF (Extended Common Object File Format) object file during linking. A local attacker could trick a user into processing this malicious file, which could lead to arbitrary code execution, allowing the attacker to run unauthorized commands, or cause a denial of service, making the system unavailable. |
| A flaw was found in the GNU Binutils BFD library, a widely used component for handling binary files such as object files and executables. The issue occurs when processing specially crafted XCOFF object files, where a relocation type value is not properly validated before being used. This can cause the program to read memory outside of intended bounds. As a result, affected tools may crash or expose unintended memory contents, leading to denial-of-service or limited information disclosure risks. |
| A flaw was found in GNU Binutils. This heap-based buffer overflow vulnerability, specifically an out-of-bounds read in the bfd linker, allows an attacker to gain access to sensitive information. By convincing a user to process a specially crafted XCOFF object file, an attacker can trigger this flaw, potentially leading to information disclosure or an application level denial of service. |
| A flaw was found in GNU Binutils. This vulnerability, a heap-based buffer overflow, specifically an out-of-bounds read, exists in the bfd linker component. An attacker could exploit this by convincing a user to process a specially crafted malicious XCOFF object file. Successful exploitation may lead to the disclosure of sensitive information or cause the application to crash, resulting in an application level denial of service. |
| A heap buffer overflow in the HighPriorityASDUQueue_hasUnconfirmedIMessages function of lib60870 v2.3.3 to v2.3.6 allows attackers to cause a Denial of Service (DoS) via a crafted payload. |
| Always-Incorrect Control Flow Implementation vulnerability in Apache Tomcat meant that special roles and empty authorisation constraints were not included when the effective web.xml was logged.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.22, from 10.1.0-M1 through 10.1.55, from 9.0.0.M1 through 9.0.118, from 8.5.0 through 8.5.100. Other versions that have reached end of support may also be affected.
Users are recommended to upgrade to version 11.0.23, 10.1.56 or 9.0.119 which fixes the issue. |
| Pinpoint through version 3.1.0 contains an insecure session management vulnerability that allows attackers to access the pinpointJwt session cookie due to missing HttpOnly and Secure attributes, enabling JavaScript access via document.cookie and cleartext transmission over HTTP. Attackers can exploit stored or reflected cross-site scripting vulnerabilities to exfiltrate the session token or intercept it through network sniffing to perform session hijacking. |
| A flaw was found in GLib. A state confusion issue exists in g_dbus_node_info_new_for_xml() in the gio/gdbusintrospection.c file when processing malformed D-Bus introspection XML, specifically with a <node> element nested within other elements like <method>, <signal>, <property> or <arg>. This issue can cause an unsigned integer overflow and lead to an out-of-bounds read, resulting in a denial of service. |
| CryptX versions before 0.088_001 for Perl compare AEAD authentication tags in non-constant time in the streaming decrypt_done path.
The decrypt_done($tag) form compares it against the computed tag with memNE (memcmp() != 0), which short-circuits on the first differing byte, so its run time depends on the number of matching leading bytes. This affects all five AEAD modes: GCM, CCM, ChaCha20Poly1305, EAX and OCB. The one-shot *_decrypt_verify helpers are unaffected; they verify the tag inside libtomcrypt with a constant-time comparison.
The timing difference is a tag-verification oracle. An attacker who can submit many candidate tags for the same nonce, ciphertext and associated data while measuring the timing precisely enough may recover the expected tag byte by byte and forge a message that verifies. |
| Parseable before 2.9.2 contains an information disclosure vulnerability in the notification-target API endpoints that returns webhook tokens and basic-auth credentials in cleartext due to commented-out secret-masking functionality. Any authenticated user with the GetAlert action, including low-privilege reader roles, can recover credentials and internal endpoint URLs for all configured notification targets by querying GET /api/v1/targets or related endpoints. |
| FrontAccounting before 2.4.20 contains a path traversal vulnerability in the attachment upload handler that allows authenticated attackers to execute arbitrary code by uploading files with traversal sequences in the unique_name parameter. Attackers can supply path traversal sequences ../../../shell.php to write files outside the intended attachments directory into the web root, and by uploading PHP files without extension validation, achieve remote code execution as the web server user. |
| Net::BitTorrent versions through 2.0.1 for Perl write files outside the download directory via path traversal in peer-supplied metadata.
Net::BitTorrent validates file path components only on the .torrent-file ingest path. The peer and magnet metadata path (_on_metadata_received, reached from the BEP09 ut_metadata extension) passes attacker-supplied file names straight to Storage::add_file and Storage::_parse_file_tree, where Path::Tiny's child() does not collapse "..". A v2 file tree key, a v1 files[].path element, or a single-file name containing ".." segments therefore resolves outside the download directory.
Because the peer also controls the piece hashes and the served bytes, content verification passes, so a malicious magnet or peer writes attacker-chosen content to an attacker-chosen path on the downloading host. |
| Net::BitTorrent versions through 2.0.1 for Perl allow remote memory exhaustion via an uncapped peer-wire message-length prefix.
The peer-wire framing in _process_messages trusts the 4-byte length prefix sent by a connected peer with no upper bound, while receive_data appends every inbound byte to the input buffer. A peer announces a length prefix of up to about 4 GiB and then streams bytes; the decoder waits until the buffer holds the full message before processing it, so the buffer grows without limit.
Peer connections are unauthenticated, so any peer in the swarm exhausts the downloading process's memory. The largest legitimate message is a 16 KiB piece block, so any announced length far above that is anomalous. |
| Elide through 7.1.17 fails to enforce @ReadPermission on client-supplied sort expressions in SortingImpl.getValidSortingRules, allowing attackers to sort collections by forbidden fields. Attackers can infer hidden field values through row ordering analysis, leaking relative field ordering across all rows via both JSON:API and GraphQL read paths. |
| Flowise before 3.0.6 (affected versions 2.2.7-patch.1 and earlier) contains an unsandboxed remote code execution vulnerability in the Custom MCP feature, which is designed to execute OS commands such as launching local MCP servers. Because Flowise's authentication and authorization model is minimal and lacks role-based access control, and the default installation runs without authentication unless FLOWISE_USERNAME and FLOWISE_PASSWORD are set, an attacker can send a crafted JSON payload with the header 'x-request-from: internal' to the /api/v1/node-load-method/customMCP endpoint to execute arbitrary OS commands, resulting in complete compromise of the platform container or server. |
| The USB CDC-NCM device class (subsys/usb/device_next/class/usbd_cdc_ncm.c) ignores the return value of usbd_ep_enqueue() in its ethernet transmit callback cdc_ncm_send(). When the enqueue fails, the function still calls k_sem_take(&data-sync_sem, K_FOREVER), blocking on a completion semaphore that is only ever signaled from the bulk-IN transfer-completion callback. Because nothing was enqueued, that callback never fires and the calling thread — a shared network traffic-class TX thread — deadlocks permanently while holding the interface TX lock, halting transmission until reboot (and leaking the transmit buffer).
The enqueue fails under conditions controlled by the attached USB host: usbd_ep_enqueue() returns -EPERM whenever the bus is suspended (a standard, persistent host operation), and the underlying udc_ep_enqueue() returns -EPERM/-ENODEV on disconnect, bus reset, or endpoint disable. The cdc_ncm_send() guard only checks the DATA_IFACE_ENABLED and IFACE_UP flags, not the suspended state, so a packet transmitted while the host holds the bus suspended reaches the failing enqueue and deadlocks the TX path.
The realistic trigger is a bus suspend that occurs while the exported network interface is active and has traffic to send — host sleep, USB selective/auto-suspend, or hub power management — after which any device-originated packet deadlocks the path, recoverable only by reboot. The impact is a persistent loss of the virtual network connection between the host's NCM interface and the Zephyr device; because the deadlocked thread is a shared traffic-class TX thread, egress on other network interfaces can stall as well. There is no memory corruption or information disclosure.
The defect was introduced with the CDC-NCM driver and shipped in releases through v4.4.0; it is fixed by checking the usbd_ep_enqueue() return value and freeing the buffer before the blocking wait. |
| fzf is vulnerable to a Denial of Service (DoS) due to inefficient HTTP body processing in the --listen mode due to inefficient HTTP body processing using repeated string concatenation, resulting in quadratic time complexity (O(n²)). A crafted POST request with many small segments can trigger excessive CPU usage during request handling.This allows a single malicious request to monopolize the single‑threaded HTTP server, blocking all other clients and resulting in denial of service.
This issue was fixed in version 0.73.1. |
| @fastify/express versions 4.0.6 and earlier only rewrite the plugin prefix for middleware mount paths when the path argument is a string. Non-string mount paths (arrays of paths and regular expressions) are left unprefixed inside prefixed plugin scopes, so middleware registered with those forms does not match the actual prefixed request path. Applications that use path-scoped middleware for authentication, authorization, rate limiting, or auditing on routes inside a prefixed scope can be bypassed by sending a request to the prefixed route, because Fastify still matches the route but the middleware is skipped. Patches: upgrade to @fastify/express 4.0.7. Workarounds: use string mount paths instead of arrays or regular expressions in prefixed plugins, or register one use call per path. |
| Arbitrary File Read (Unauthenticated) in NetScaler ADC and NetScaler Gateway if the access to NSIP, Cluster Management IP or SNIP with management access is enabled |
