| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max77705: Free allocated workqueue and fix removal order
Use devm interface for allocating workqueue to fix two bugs at the same
time:
1. Driver leaks the memory on remove(), because the workqueue is not
destroyed.
2. Driver allocates workqueue and then registers interrupt handlers
with devm interface. This means that probe error paths will not use a
reversed order, but first destroy the workqueue and then, via devm
release handlers, free the interrupt.
The interrupt handler schedules work on this exact workqueue, thus if
interrupt is hit in this short time window - after destroying
workqueue, but before devm() frees the interrupt - the schedulled
work will lead to use of freed memory.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply (power_supply_changed()) status, thus there
is no point to run it for memory reclaim. Note that dev_name() is not
directly used in second argument to prevent possible unlikely parsing
any "%" character in device name as format. |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: cbb: Fix cross-fabric target timeout lookup
When a fabric receives an error interrupt, the error may have
occurred on a different fabric. The target timeout lookup was using
the wrong base address (cbb->regs) with offsets from a different
fabric's target map, causing a kernel page fault.
Unable to handle kernel paging request at virtual address ffff80000954cc00
pc : tegra234_cbb_get_tmo_slv+0xc/0x28
Call trace:
tegra234_cbb_get_tmo_slv+0xc/0x28
print_err_notifier+0x6c0/0x7d0
tegra234_cbb_isr+0xe4/0x1b4
Add tegra234_cbb_get_fabric() to look up the correct fabric device
using fab_id, and use its base address for accessing target timeout
registers. |
| The Joomla extension JoomCCK exposes a front-end controller task, that builds two SQL statements by directly concatenating a user-supplied request parameter into the query string without escaping or parameterisation. |
| In the Linux kernel, the following vulnerability has been resolved:
agp/amd64: Fix broken error propagation in agp_amd64_probe()
A NULL pointer dereference was observed in the AMD64 AGP driver when
running in a virtualized environment (e.g. qemu/kvm) without a physical
AMD northbridge. The crash occurs in amd64_fetch_size() when attempting
to dereference the pointer returned by node_to_amd_nb(0).
The root cause of this crash is broken error propagation in
agp_amd64_probe(): When no AMD northbridges are found, cache_nbs()
correctly returns -ENODEV. However, the probe function erroneously
checks the return value against exactly -1, rather than < 0.
As a result, the hardware absence error is masked, allowing the driver
to improperly proceed with initialization. It eventually calls
agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware
does not exist, node_to_amd_nb(0) returns NULL, leading to a General
Protection Fault (GPF) when accessing its ->misc member.
Fix the issue by correcting the error check in agp_amd64_probe() to
abort properly when cache_nbs() returns any negative error code. This
prevents the driver from erroneously proceeding without hardware, thereby
avoiding the subsequent NULL pointer dereference at its source. |
| Author Cross Site Scripting (XSS) in Featured Image <= 2.1 versions. |
| Contributor Broken Access Control in Nelio Content <= 4.3.4 versions. |
| A vulnerability was determined in Wavlink WL-NU516U1-A M16U1_V240425. The affected element is the function sub_401D68 of the file /cgi-bin/wireless.cgi of the component POST Parameter Handler. This manipulation of the argument SSID2G2/SSID5G2/AuthMethod2/WPAPSK12 causes command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The affected component should be upgraded. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A vulnerability was determined in SourceCodester Class and Exam Timetabling System 1.0/1.php. Affected by this vulnerability is an unknown functionality of the file /edit_class1.php. Executing a manipulation of the argument ID can lead to sql injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. |
| Home Assistant is open source home automation software that puts local control and privacy first. Prior to 2025.5.0, The iOS companion app ignores the SSID allowlist for internal networks. The app uses SSID to detect when to use the internal URL, but whenever the app cannot find any other URL to be used, it fallbacks to the internal URL as well, which can expose user's token when connected to a not secure network. This vulnerability is fixed in 2025.5.0. |
| A vulnerability was determined in llvm llvm-project up to 22.1.6. This impacts the function GCRelocateInst::getBasePtr in the library llvm/lib/IR/IntrinsicInst.cpp of the component Bitcode File Handler. This manipulation causes heap-based buffer overflow. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/eustall: Fix drm_dev_put called before stream disable in close
In xe_eu_stall_stream_close(), drm_dev_put() is called before the
stream is disabled and its resources are freed. If this drops the
last reference, the device structures could be freed while the
subsequent cleanup code still accesses them, leading to a
use-after-free.
Fix this by moving drm_dev_put() after all device accesses are
complete. This matches the ordering in xe_oa_release().
(cherry picked from commit 35aff528f7297e949e5e19c9cd7fd748cf1cf21c) |
| In the Linux kernel, the following vulnerability has been resolved:
net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind
syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via
pn_socket_autobind():
kernel BUG at net/phonet/socket.c:213!
RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline]
RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421
Call Trace:
sock_sendmsg_nosec+0x112/0x150 net/socket.c:797
__sock_sendmsg net/socket.c:812 [inline]
__sys_sendto+0x402/0x590 net/socket.c:2280
...
pn_socket_autobind() calls pn_socket_bind() with port 0 and, on
-EINVAL, assumes the socket was already bound and asserts that the
port is non-zero:
err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn));
if (err != -EINVAL)
return err;
BUG_ON(!pn_port(pn_sk(sock->sk)->sobject));
return 0; /* socket was already bound */
However pn_socket_bind() also returns -EINVAL when sk->sk_state is not
TCP_CLOSE, even when the socket has never been bound and pn_port() is
still 0. In that case the BUG_ON() fires and panics the kernel from a
user-triggerable path.
Treat the "bind returned -EINVAL but pn_port() is still 0" case as a
regular error and propagate -EINVAL to the caller instead of crashing.
Existing callers already translate a non-zero return from
pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here
only changes behaviour from panic to a normal errno. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mailbox-test: don't free the reused channel
The RX channel can be aliased to the TX channel if it has a different
MMIO. This special case needs to be handled when freeing the channels
otherwise a double-free occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: add sanity check for channel array
Fail gracefully if there is no channel array attached to the mailbox
controller. Otherwise the later dereference will cause an OOPS which
might not be seen because mailbox controllers might instantiate very
early. Remove the comment explaining the obvious while here. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Guard mana_remove against double invocation
If PM resume fails (e.g., mana_attach() returns an error), mana_probe()
calls mana_remove(), which tears down the device and sets
gd->gdma_context = NULL and gd->driver_data = NULL.
However, a failed resume callback does not automatically unbind the
driver. When the device is eventually unbound, mana_remove() is invoked
a second time. Without a NULL check, it dereferences gc->dev with
gc == NULL, causing a kernel panic.
Add an early return if gdma_context or driver_data is NULL so the second
invocation is harmless. Move the dev = gc->dev assignment after the
guard so it cannot dereference NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
reset: amlogic: t7: Fix null reset ops
Fix missing reset ops causing kernel null pointer dereference.
This SOC's reset is currently not used yet. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Resolve soft lockup issue when opening /dev/sgX
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix uninit-value in fuse_dentry_revalidate()
fuse_dentry_revalidate() may be called with a dentry that didn't had
->d_time initialised. The issue was found with KMSAN, where lookup_open()
calls __d_alloc(), followed by d_revalidate(), as shown below:
=====================================================
BUG: KMSAN: uninit-value in fuse_dentry_revalidate+0x150/0x13d0 fs/fuse/dir.c:394
fuse_dentry_revalidate+0x150/0x13d0 fs/fuse/dir.c:394
d_revalidate fs/namei.c:1030 [inline]
lookup_open fs/namei.c:4405 [inline]
open_last_lookups fs/namei.c:4583 [inline]
path_openat+0x1614/0x64c0 fs/namei.c:4827
do_file_open+0x2aa/0x680 fs/namei.c:4859
[...]
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4466 [inline]
slab_alloc_node mm/slub.c:4788 [inline]
kmem_cache_alloc_lru_noprof+0x382/0x1280 mm/slub.c:4807
__d_alloc+0x55/0xa00 fs/dcache.c:1740
d_alloc_parallel+0x99/0x2740 fs/dcache.c:2604
lookup_open fs/namei.c:4398 [inline]
open_last_lookups fs/namei.c:4583 [inline]
path_openat+0x135f/0x64c0 fs/namei.c:4827
do_file_open+0x2aa/0x680 fs/namei.c:4859
[...]
===================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: Place upper limit on station AID
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-wbt: remove WARN_ON_ONCE from wbt_init_enable_default()
wbt_init_enable_default() uses WARN_ON_ONCE to check for failures from
wbt_alloc() and wbt_init(). However, both are expected failure paths:
- wbt_alloc() can return NULL under memory pressure (-ENOMEM)
- wbt_init() can fail with -EBUSY if wbt is already registered
syzbot triggers this by injecting memory allocation failures during MTD
partition creation via ioctl(BLKPG), causing a spurious warning.
wbt_init_enable_default() is a best-effort initialization called from
blk_register_queue() with a void return type. Failure simply means the
disk operates without writeback throttling, which is harmless.
Replace WARN_ON_ONCE with plain if-checks, consistent with how
wbt_set_lat() in the same file already handles these failures. Add a
pr_warn() for the wbt_init() failure to retain diagnostic information
without triggering a full stack trace. |
