| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Advanced Malware Protection (AMP) file filtering feature of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to bypass a configured AMP file filtering rule. The file types affected are zipped or archived file types. The vulnerability is due to incorrect and different file hash values when AMP scans the file. An attacker could exploit this vulnerability by sending a crafted email file attachment through the targeted device. An exploit could allow the attacker to bypass a configured AMP file filter. Cisco Bug IDs: CSCvf52943. |
| A vulnerability exists in the process of creating default IP blocks during device initialization for Cisco ASA Next-Generation Firewall Services that could allow an unauthenticated, remote attacker to send traffic to the local IP address of the device, bypassing any filters that are configured to deny local IP management traffic. The vulnerability is due to an implementation error that exists in the process of creating default IP blocks when the device is initialized, and the way in which those IP blocks interact with user-configured filters for local IP management traffic (for example, SSH to the device). An attacker could exploit this vulnerability by sending traffic to the local IP address of the targeted device. A successful exploit could allow the attacker to connect to the local IP address of the device even when there are filters configured to deny the traffic. Cisco Bug IDs: CSCvd97962. |
| A vulnerability in Cisco WebEx Meeting Center could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of an affected system. The vulnerability is due to insufficient input validation of some parameters that are passed to the web server of the affected system. An attacker could exploit this vulnerability by convincing a user to follow a malicious link or by intercepting a user request and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected web interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf78615, CSCvf78628. |
| A vulnerability in the SNORT detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to bypass a file policy that is configured to block the Server Message Block Version 2 (SMB2) protocol. The vulnerability is due to the incorrect detection of an SMB2 file when the detection is based on the length of the file. An attacker could exploit this vulnerability by sending a crafted SMB2 transfer request through the targeted device. A successful exploit could allow the attacker to bypass filters that are configured to block SMB2 traffic. Cisco Bug IDs: CSCve58398. |
| Multiple vulnerabilities in Cisco Data Center Network Manager (DCNM) Software could allow a remote attacker to inject arbitrary values into DCNM configuration parameters, redirect a user to a malicious website, inject malicious content into a DCNM client interface, or conduct a cross-site scripting (XSS) attack against a user of the affected software. Cisco Bug IDs: CSCvf40477, CSCvf63150, CSCvf68218, CSCvf68235, CSCvf68247. |
| A vulnerability in the wireless controller manager of Cisco IOS XE could allow an unauthenticated, adjacent attacker to cause a restart of the switch and result in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting a crafted association request. An exploit could allow the attacker to cause the switch to restart. This vulnerability affects Cisco Catalyst 3650 and 3850 switches running IOS XE Software versions 16.1 through 16.3.3, and acting as wireless LAN controllers (WLC). Cisco Bug IDs: CSCvd45069. |
| A vulnerability in the web-based management interface of Cisco Firepower Management Center could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvc50771. |
| A vulnerability in the General Packet Radio Service (GPRS) Tunneling Protocol ingress packet handler of Cisco ASR 5500 System Architecture Evolution (SAE) Gateways could allow an unauthenticated, remote attacker to cause a partial denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation of GPRS Tunneling Protocol packet headers. An attacker could exploit this vulnerability by sending a malformed GPRS Tunneling Protocol packet to an affected device. A successful exploit could allow the attacker to cause the GTPUMGR process on an affected device to restart unexpectedly, resulting in a partial DoS condition. If the GTPUMGR process restarts, there could be a brief impact on traffic passing through the device. Cisco Bug IDs: CSCve07119. |
| A vulnerability in the web-based user interface of Cisco SocialMiner could allow an unauthenticated, remote attacker to have read and write access to information stored in the affected system. The vulnerability is due to improper handling of XML External Entity (XXE) entries when parsing an XML file. An attacker could exploit this vulnerability by convincing the administrator of an affected system to import a crafted XML file with malicious entries, which could allow the attacker to read and write files and execute remote code within the application. Cisco Bug IDs: CSCvf47946. |
| A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751. |
| A vulnerability in the web interface of Cisco Network Analysis Module Software could allow an unauthenticated, remote attacker to delete arbitrary files from an affected system, aka Directory Traversal. The vulnerability exists because the affected software does not perform proper input validation of HTTP requests that it receives and the software does not apply role-based access controls (RBACs) to requested HTTP URLs. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow the attacker to delete arbitrary files from the affected system. Cisco Bug IDs: CSCvf41365. |
| A vulnerability in the IPv6 Simple Network Management Protocol (SNMP) code of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause high CPU usage or a reload of the device. The vulnerability is due to IPv6 sub block corruption. An attacker could exploit this vulnerability by polling the affected device IPv6 information. An exploit could allow the attacker to trigger high CPU usage or a reload of the device. Known Affected Releases: Denali-16.3.1. Cisco Bug IDs: CSCvb14640. |
| On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is no access control for info.html, wancfg.cmd, rtroutecfg.cmd, arpview.cmd, cpuview.cmd, memoryview.cmd, statswan.cmd, statsatm.cmd, scsrvcntr.cmd, scacccntr.cmd, logview.cmd, voicesipview.cmd, usbview.cmd, wlmacflt.cmd, wlwds.cmd, wlstationlist.cmd, HPNAShow.cmd, HPNAView.cmd, qoscls.cmd, qosqueue.cmd, portmap.cmd, scmacflt.cmd, scinflt.cmd, scoutflt.cmd, certlocal.cmd, or certca.cmd. |
| A vulnerability in the web interface of the Cisco Secure Access Control System (ACS) could allow an unauthenticated, remote attacker to disclose sensitive information. More Information: CSCvc04854. Known Affected Releases: 5.8(2.5). |
| A vulnerability with IPv6 UDP ingress packet processing in Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause an unexpected reload of the device. The vulnerability is due to incomplete IPv6 UDP header validation. An attacker could exploit this vulnerability by sending a crafted IPv6 UDP packet to a specific port on the targeted device. An exploit could allow the attacker to impact the availability of the device as it could unexpectedly reload. This vulnerability affects Cisco Wireless LAN Controller (WLC) running software version 8.2.121.0 or 8.3.102.0. Cisco Bug IDs: CSCva98592. |
| A vulnerability in the web-based management interface of Cisco Unified Contact Center Express could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf09173. |
| Multiple vulnerabilities in Cisco Data Center Network Manager (DCNM) Software could allow a remote attacker to inject arbitrary values into DCNM configuration parameters, redirect a user to a malicious website, inject malicious content into a DCNM client interface, or conduct a cross-site scripting (XSS) attack against a user of the affected software. Cisco Bug IDs: CSCvf40477, CSCvf63150, CSCvf68218, CSCvf68235, CSCvf68247. |
| A vulnerability in the CLI command-parsing code of Cisco Meeting Server could allow an authenticated, local attacker to perform command injection and escalate their privileges to root. The attacker must first authenticate to the application with valid administrator credentials. The vulnerability is due to insufficient validation of user-supplied input at the CLI for certain commands. An attacker could exploit this vulnerability by authenticating to the affected application and submitting a crafted CLI command for execution at the Cisco Meeting Server CLI. An exploit could allow the attacker to perform command injection and escalate their privilege level to root. Vulnerable Products: This vulnerability exists in Cisco Meeting Server software versions prior to and including 2.0, 2.1, and 2.2. Cisco Bug IDs: CSCvf53830. |
| A vulnerability in the USB-modem code of Cisco IOS XE Software running on Cisco ASR 920 Series Aggregation Services Routers could allow an authenticated, local attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the platform usb modem command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the platform usb modem command in the CLI of an affected device. A successful exploit could allow the attacker to inject and execute arbitrary commands on the underlying operating system of an affected device. Cisco Bug IDs: CSCve48949. |
| A vulnerability in the batch provisioning feature in Cisco Prime Collaboration Provisioning Tool could allow an authenticated, remote attacker to overwrite system files as root. The vulnerability is due to lack of input validation of the parameters in BatchFileName and Directory. An attacker could exploit this vulnerability by manipulating the parameters of the batch action file function. Cisco Bug IDs: CSCvd61766. |
