| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: disable SVA when CONFIG_X86 is set
Patch series "Fix stale IOTLB entries for kernel address space", v7.
This proposes a fix for a security vulnerability related to IOMMU Shared
Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel
page table entries. When a kernel page table page is freed and
reallocated for another purpose, the IOMMU might still hold stale,
incorrect entries. This can be exploited to cause a use-after-free or
write-after-free condition, potentially leading to privilege escalation or
data corruption.
This solution introduces a deferred freeing mechanism for kernel page
table pages, which provides a safe window to notify the IOMMU to
invalidate its caches before the page is reused.
This patch (of 8):
In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware
shares and walks the CPU's page tables. The x86 architecture maps the
kernel's virtual address space into the upper portion of every process's
page table. Consequently, in an SVA context, the IOMMU hardware can walk
and cache kernel page table entries.
The Linux kernel currently lacks a notification mechanism for kernel page
table changes, specifically when page table pages are freed and reused.
The IOMMU driver is only notified of changes to user virtual address
mappings. This can cause the IOMMU's internal caches to retain stale
entries for kernel VA.
Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when
kernel page table pages are freed and later reallocated. The IOMMU could
misinterpret the new data as valid page table entries. The IOMMU might
then walk into attacker-controlled memory, leading to arbitrary physical
memory DMA access or privilege escalation. This is also a
Write-After-Free issue, as the IOMMU will potentially continue to write
Accessed and Dirty bits to the freed memory while attempting to walk the
stale page tables.
Currently, SVA contexts are unprivileged and cannot access kernel
mappings. However, the IOMMU will still walk kernel-only page tables all
the way down to the leaf entries, where it realizes the mapping is for the
kernel and errors out. This means the IOMMU still caches these
intermediate page table entries, making the described vulnerability a real
concern.
Disable SVA on x86 architecture until the IOMMU can receive notification
to flush the paging cache before freeing the CPU kernel page table pages. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix deadlock in wait_current_trans() due to ignored transaction type
When wait_current_trans() is called during start_transaction(), it
currently waits for a blocked transaction without considering whether
the given transaction type actually needs to wait for that particular
transaction state. The btrfs_blocked_trans_types[] array already defines
which transaction types should wait for which transaction states, but
this check was missing in wait_current_trans().
This can lead to a deadlock scenario involving two transactions and
pending ordered extents:
1. Transaction A is in TRANS_STATE_COMMIT_DOING state
2. A worker processing an ordered extent calls start_transaction()
with TRANS_JOIN
3. join_transaction() returns -EBUSY because Transaction A is in
TRANS_STATE_COMMIT_DOING
4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes
5. A new Transaction B is created (TRANS_STATE_RUNNING)
6. The ordered extent from step 2 is added to Transaction B's
pending ordered extents
7. Transaction B immediately starts commit by another task and
enters TRANS_STATE_COMMIT_START
8. The worker finally reaches wait_current_trans(), sees Transaction B
in TRANS_STATE_COMMIT_START (a blocked state), and waits
unconditionally
9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START
according to btrfs_blocked_trans_types[]
10. Transaction B is waiting for pending ordered extents to complete
11. Deadlock: Transaction B waits for ordered extent, ordered extent
waits for Transaction B
This can be illustrated by the following call stacks:
CPU0 CPU1
btrfs_finish_ordered_io()
start_transaction(TRANS_JOIN)
join_transaction()
# -EBUSY (Transaction A is
# TRANS_STATE_COMMIT_DOING)
# Transaction A completes
# Transaction B created
# ordered extent added to
# Transaction B's pending list
btrfs_commit_transaction()
# Transaction B enters
# TRANS_STATE_COMMIT_START
# waiting for pending ordered
# extents
wait_current_trans()
# waits for Transaction B
# (should not wait!)
Task bstore_kv_sync in btrfs_commit_transaction waiting for ordered
extents:
__schedule+0x2e7/0x8a0
schedule+0x64/0xe0
btrfs_commit_transaction+0xbf7/0xda0 [btrfs]
btrfs_sync_file+0x342/0x4d0 [btrfs]
__x64_sys_fdatasync+0x4b/0x80
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Task kworker in wait_current_trans waiting for transaction commit:
Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs]
__schedule+0x2e7/0x8a0
schedule+0x64/0xe0
wait_current_trans+0xb0/0x110 [btrfs]
start_transaction+0x346/0x5b0 [btrfs]
btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs]
btrfs_work_helper+0xe8/0x350 [btrfs]
process_one_work+0x1d3/0x3c0
worker_thread+0x4d/0x3e0
kthread+0x12d/0x150
ret_from_fork+0x1f/0x30
Fix this by passing the transaction type to wait_current_trans() and
checking btrfs_blocked_trans_types[cur_trans->state] against the given
type before deciding to wait. This ensures that transaction types which
are allowed to join during certain blocked states will not unnecessarily
wait and cause deadlocks. |
| A session fixation vulnerability has been identified in osTicket v1.18.2. This security flaw allows an attacker to hijack a victim’s account by keeping the initial session identifier (OSTSESSID) active after a successful login.
The issue lies in the fact that the application does not invalidate the pre-authentication cookie or generate a new identifier for the authenticated context. As a result, if an attacker manages to set a known session identifier in the victim’s browser, they will be able to maintain unauthorised access to the account once the victim has authenticated. |
| The WooCommerce Stripe Payment Gateway plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `ajax_pay_for_order()` function in all versions up to, and including, 10.7.0 This is due to a missing order ownership or order_key verification when processing payment for an order via the `wc_stripe_pay_for_order` WC-AJAX endpoint. The function only validates a nonce (which is publicly available on any WooCommerce page where Express Checkout is enabled), but does not verify that the requesting user owns the target order and is allowed to modify it. This makes it possible for unauthenticated attackers to force any pending order into a failed status by providing a fake payment method, causing a payment exception that updates the order status to "failed" via sequential order ID enumeration. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Filipe Nasc RD Station allows Remote Code Inclusion.
This issue affects RD Station: from n/a through 5.6.0. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: fix races with imon_disconnect()
Syzbot reports a KASAN issue as below:
BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline]
BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465
CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
__create_pipe include/linux/usb.h:1945 [inline]
send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991
vfs_write+0x2d7/0xdd0 fs/read_write.c:576
ksys_write+0x127/0x250 fs/read_write.c:631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The iMON driver improperly releases the usb_device reference in
imon_disconnect without coordinating with active users of the
device.
Specifically, the fields usbdev_intf0 and usbdev_intf1 are not
protected by the users counter (ictx->users). During probe,
imon_init_intf0 or imon_init_intf1 increments the usb_device
reference count depending on the interface. However, during
disconnect, usb_put_dev is called unconditionally, regardless of
actual usage.
As a result, if vfd_write or other operations are still in
progress after disconnect, this can lead to a use-after-free of
the usb_device pointer.
Thread 1 vfd_write Thread 2 imon_disconnect
...
if
usb_put_dev(ictx->usbdev_intf0)
else
usb_put_dev(ictx->usbdev_intf1)
...
while
send_packet
if
pipe = usb_sndintpipe(
ictx->usbdev_intf0) UAF
else
pipe = usb_sndctrlpipe(
ictx->usbdev_intf0, 0) UAF
Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by
checking ictx->disconnected in all writer paths. Add early return
with -ENODEV in send_packet(), vfd_write(), lcd_write() and
display_open() if the device is no longer present.
Set and read ictx->disconnected under ictx->lock to ensure memory
synchronization. Acquire the lock in imon_disconnect() before setting
the flag to synchronize with any ongoing operations.
Ensure writers exit early and safely after disconnect before the USB
core proceeds with cleanup.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.0, it is possible to inject commands within the subshell through kitty error. A special escape code will make kitty return an error, this error is not escaped and will be correctly echoed back to the terminal with CRLF, as such it will be run by the shell in use. To exploit this bug, the victim must use a netcat or a similar program to connect to the attacker, or else listening for someone to connect. Once this condition is set, an attacker could pwn the computer of the victim using a special kitty's escape code that will run a command in the shell in use. Version 04.7.0 fixes the issue. |
| Unauthenticated Cross Site Scripting (XSS) in Pods <= 3.3.8 versions. |
| Unauthenticated Cross Site Scripting (XSS) in Min Max Step Quantity Limits Manager for WooCommerce <= 5.2.2 versions. |
| Due to the improper neutralization of special elements used in a name parameter a low privileged remote attacker can exploit a command injection vulnerability in the Managed Ethernet Switch, resulting in full system compromise. |
| A use-after-free vulnerability was found in libxslt while parsing xsl nodes that may lead to the dereference of expired pointers and application crash. |
| Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.0, a program able to write bytes to a kitty terminal — a remote SSH peer, a downloaded file viewed with `cat`, a log line, an email body rendered in `less`, an issue body in a TUI, etc. — can cause kitty to execute attacker-supplied Python inside the running kitty process, with the user's full privileges. There is no approval prompt, no remote-control permission requirement, no shell-integration interaction, no clipboard touch, and no editor interaction. Version 0.47.0 fixes the issue. |
| The RTMKit plugin for WordPress is vulnerable to Incorrect Authorization in all versions up to, and including, 2.0.7 This is due to the get_submission_content AJAX endpoint lacking a capability check to verify that a user has permission to access the requested form submission data. This makes it possible for authenticated attackers, with Contributor-level access and above, to view arbitrary form submissions from other users by iterating the entries_id parameter. |
| Dancer2::Plugin::Auth::OAuth versions before 0.22 for Perl default to a predictable nonce.
The default nonce was generated using an MD5 hash of the epoch time, which is predictable. |
| Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.2, a local privilege escalation vulnerability exists in kitty's file transmission protocol where a child process running in the terminal can write to arbitrary files on the filesystem by exploiting a TOCTOU (Time-of-Check-Time-of-Use) race condition between symlink validation and file creation. The `os.open()` call used to create files does not use `O_NOFOLLOW`, allowing an attacker to create a symlink between the initial stat check and the actual file open, causing the write to follow the symlink to an arbitrary destination. Version 0.47.2 fixes the issue. |
| Kitty is a cross-platform GPU based terminal. In versions 0.47.0 and 0.47.1, `kitten dnd` can allow a malicious remote drag-and-drop source to overwrite or truncate arbitrary files writable by the local kitty user. Remote `text/uri-list` drops are staged in a temporary directory, but on case-sensitive filesystems duplicate remote basenames are not de-duplicated. An attacker can first create a staged symlink and then send a same-name regular-file entry. The regular-file write uses `utils.CreateAt()` / `openat(O_RDWR|O_CREAT|O_TRUNC)` without `O_NOFOLLOW`, so it follows the attacker-created symlink and writes outside the staging directory before final overwrite confirmation runs. This appears related in class to the file-transfer symlink advisory, but it is a different bug: it affects `kitten dnd` remote drag-and-drop staging, uses different vulnerable code (`kittens/dnd/drop.go` and `tools/utils/file_at_fd.go`), and reproduces on commit `4aa4a5c0567a92553a8c20a88a4352da637fca5d`, after the file-transfer `O_NOFOLLOW` fix. Version 0.47.2 patches the issue. |
| Shop manager Privilege Escalation in WooCommerce Cart Abandonment Recovery < 2.1.0 versions. |
| Socket versions before 2.041 for Perl have an out-of-bounds heap read.
In Socket.xs, pack_ip_mreq_source() checks the length of its source argument before the argument is read, so the check tests the byte length carried over from the preceding multiaddr argument instead. Both addresses occupy a 4-byte field, so a valid multiaddr lets a source of any length pass the check, and the source is then copied into the 4-byte imr_sourceaddr field with a fixed-size copy. A source shorter than 4 bytes is not rejected, and the copy reads up to 3 bytes past the end of its buffer.
Calling pack_ip_mreq_source() with a source value shorter than 4 bytes copies adjacent heap memory into the returned packed structure. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp
Patch series "mm/damon/core: validate damos_quota_goal->nid".
node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The
node id is used for si_meminfo_node() and NODE_DATA() without proper
validation. As a result, privileged users can trigger an out of bounds
memory access using DAMON_SYSFS. Fix the issues.
The issue was originally reported [1] with a fix by another author. The
original author announced [2] that they will stop working including the
fix that was still in the review stage. Hence I'm restarting this.
This patch (of 2):
Users can set damos_quota_goal->nid with arbitrary value for
node_mem_{used,free}_bp. But DAMON core is using those for
si_meminfo_node() without the validation of the value. This can result in
out of bounds memory access. The issue can actually triggered using DAMON
user-space tool (damo), like below.
$ sudo ./damo start --damos_action stat \
--damos_quota_goal node_mem_used_bp 50% -1 \
--damos_quota_interval 1s
$ sudo dmesg
[...]
[ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
Fix this issue by adding the validation of the given node. If an invalid
node id is given, it returns 0% for used memory ratio, and 100% for free
memory ratio. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration. |
