| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect calculation of buffer size in Windows VMSwitch allows an authorized attacker to deny service over an adjacent network. |
| Contributor SQL Injection in PowerPress Podcasting <= 11.15.10 versions. |
| Subscriber Broken Access Control in bunny.net <= 2.3.6 versions. |
| Editor Privilege Escalation in AI Engine <= 3.4.9 versions. |
| No cwe for this issue in Windows DHCP Server allows an unauthorized attacker to perform tampering over a network. |
| Unrestricted resource allocation in AMD uProf may be exploitable to consume excessive system resources, potentially leading to a loss of availability. |
| Subscriber Broken Access Control in rtMedia for WordPress, BuddyPress and bbPress <= 4.7.9 versions. |
| Improper access control in AMD uProf may allow a local attacker with user privileges to write to the kernel-shared memory section, potentially resulting in crash or denial of service. |
| Author PHP Object Injection in Modula Image Gallery <= 2.14.18 versions. |
| OpenClaw before 2026.5.7 contains a sender policy bypass vulnerability in BlueBubbles that allows participants to match allowlist entries through conversation metadata rather than stable sender identity. Attackers can influence conversation-level identifiers to receive agent responses intended for configured senders, potentially bypassing access controls. |
| A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system.
This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric. |
| May 2026: This security advisory provides the details and fix information for a vulnerability that was discovered and fixed after the was disclosed in February 2026. This new advisory is for a new vulnerability in the control connection handshaking. The section of this advisory includes Show Control Connections guidance to help with system checks.
A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system.
This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to the affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric. |
| Passing of unsanitized strings from DHCP replies into the wicked dhcp client before wicked 0.6.79 could be used by attackers operating a malicious DHCP server to execute code on the local machine. |
| An attacker with network-level access between the SUSE Virtualization
and Rancher Manager in SUSE Harvester before 1.8.0 could interfere with the TLS handshake and abuse it
to bypass TLS as a security control. |
| Unauthenticated Cross Site Scripting (XSS) in Contact Form to Any API <= 3.0.3 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device_node leak in mc_probe()
of_parse_phandle() returns a device_node reference that must be released with
of_node_put(). The original code never freed r5_core_node on any exit path,
causing a memory leak.
Fix this by using the automatic cleanup attribute __free(device_node) which
ensures of_node_put() is called when the variable goes out of scope. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ks8851: Reinstate disabling of BHs around IRQ handler
If the driver executes ks8851_irq() AND a TX packet has been sent, then
the driver enables TX queue via netif_wake_queue() which schedules TX
softirq to queue packets for this device.
If CONFIG_PREEMPT_RT=y is set AND a packet has also been received by
the MAC, then ks8851_rx_pkts() calls netdev_alloc_skb_ip_align() to
allocate SKBs for the received packets. If netdev_alloc_skb_ip_align()
is called with BH enabled, then local_bh_enable() at the end of
netdev_alloc_skb_ip_align() will trigger the pending softirq processing,
which may ultimately call the .xmit callback ks8851_start_xmit_par().
The ks8851_start_xmit_par() will try to lock struct ks8851_net_par
.lock spinlock, which is already locked by ks8851_irq() from which
ks8851_start_xmit_par() was called. This leads to a deadlock, which
is reported by the kernel, including a trace listed below.
If CONFIG_PREEMPT_RT is not set, then since commit 0913ec336a6c0
("net: ks8851: Fix deadlock with the SPI chip variant") the deadlock
can also be triggered without received packet in the RX FIFO. The
pending softirqs will be processed on return from
spin_unlock_bh(&ks->statelock) in ks8851_irq(), which triggers the
deadlock as well.
Fix the problem by disabling BH around critical sections, including the
IRQ handler, thus preventing the net_tx_action() softirq from triggering
during these critical sections. The net_tx_action() softirq is triggered
once BH are re-enabled and at the end of the IRQ handler, once all the
other IRQ handler actions have been completed.
__schedule from schedule_rtlock+0x1c/0x34
schedule_rtlock from rtlock_slowlock_locked+0x548/0x904
rtlock_slowlock_locked from rt_spin_lock+0x60/0x9c
rt_spin_lock from ks8851_start_xmit_par+0x74/0x1a8
ks8851_start_xmit_par from netdev_start_xmit+0x20/0x44
netdev_start_xmit from dev_hard_start_xmit+0xd0/0x188
dev_hard_start_xmit from sch_direct_xmit+0xb8/0x25c
sch_direct_xmit from __qdisc_run+0x1f8/0x4ec
__qdisc_run from qdisc_run+0x1c/0x28
qdisc_run from net_tx_action+0x1f0/0x268
net_tx_action from handle_softirqs+0x1a4/0x270
handle_softirqs from __local_bh_enable_ip+0xcc/0xe0
__local_bh_enable_ip from __alloc_skb+0xd8/0x128
__alloc_skb from __netdev_alloc_skb+0x3c/0x19c
__netdev_alloc_skb from ks8851_irq+0x388/0x4d4
ks8851_irq from irq_thread_fn+0x24/0x64
irq_thread_fn from irq_thread+0x178/0x28c
irq_thread from kthread+0x12c/0x138
kthread from ret_from_fork+0x14/0x28 |
| Yeoman Environment provides an API to discover, create, and run generators, and to configure where and how a generator is resolved. Versions 2.9.0 through 6.0.0 install missing local generator packages from caller-supplied package names without user confirmation. In downstream consumers that pass attacker-controlled project configuration into this path, this can result in arbitrary package installation and code execution during CLI bootstrap. The vulnerable method is installLocalGenerators(), which calls repository.install() directly without prompting the user. This issue has been fixed in version 6.0.0. |
| Capgo before 12.128.2 fails to delete previously uploaded profile images from backend storage when users replace or remove them. Attackers can access orphaned image files through previously generated URLs, allowing unauthorized retrieval of user-uploaded content. |
| subsys/net/ip/ipv6_mld.c:mld_send() read the packet interface via net_pkt_iface(pkt) after net_send_data(pkt) returned successfully. Per the network stack's ownership contract (include/zephyr/net/net_core.h, and the explicit warning in subsys/net/ip/net_core.c:453-460 'do not use pkt after that call'), a successful send transfers ownership of the net_pkt and the L2 driver frees it (e.g. ethernet_send() unrefs the packet on success, subsys/net/l2/ethernet/ethernet.c:790), returning it to its k_mem_slab. The subsequent net_pkt_iface(pkt) is therefore a read of a freed object; the recovered interface pointer is then dereferenced and incremented by the per-interface statistics path (net_stats.h UPDATE_STAT/SET_STAT) when CONFIG_NET_STATISTICS_PER_INTERFACE is enabled. If the freed slot is concurrently reallocated, pkt-iface may read back as NULL (NULL-pointer dereference / crash) or as a stale/garbage pointer (stray increment write / memory corruption). The path is reachable remotely on the local link without authentication: handle_mld_query() (registered for NET_ICMPV6_MLD_QUERY) responds to a valid MLDv2 General Query (unspecified multicast address, hop limit 1) by calling send_mld_report() - mld_send(). The result is a remotely triggerable denial of service of the networking stack, with a narrow possibility of memory corruption. The fix caches the interface in a local before sending and no longer touches the packet after net_send_data(). The IPv4/IGMP sibling (igmp_send) already used the corrected pattern. |
