Total
311 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-53096 | 1 Linux | 1 Linux Kernel | 2025-01-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: resolve faulty mmap_region() error path behaviour The mmap_region() function is somewhat terrifying, with spaghetti-like control flow and numerous means by which issues can arise and incomplete state, memory leaks and other unpleasantness can occur. A large amount of the complexity arises from trying to handle errors late in the process of mapping a VMA, which forms the basis of recently observed issues with resource leaks and observable inconsistent state. Taking advantage of previous patches in this series we move a number of checks earlier in the code, simplifying things by moving the core of the logic into a static internal function __mmap_region(). Doing this allows us to perform a number of checks up front before we do any real work, and allows us to unwind the writable unmap check unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE validation unconditionally also. We move a number of things here: 1. We preallocate memory for the iterator before we call the file-backed memory hook, allowing us to exit early and avoid having to perform complicated and error-prone close/free logic. We carefully free iterator state on both success and error paths. 2. The enclosing mmap_region() function handles the mapping_map_writable() logic early. Previously the logic had the mapping_map_writable() at the point of mapping a newly allocated file-backed VMA, and a matching mapping_unmap_writable() on success and error paths. We now do this unconditionally if this is a file-backed, shared writable mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however doing so does not invalidate the seal check we just performed, and we in any case always decrement the counter in the wrapper. We perform a debug assert to ensure a driver does not attempt to do the opposite. 3. We also move arch_validate_flags() up into the mmap_region() function. This is only relevant on arm64 and sparc64, and the check is only meaningful for SPARC with ADI enabled. We explicitly add a warning for this arch if a driver invalidates this check, though the code ought eventually to be fixed to eliminate the need for this. With all of these measures in place, we no longer need to explicitly close the VMA on error paths, as we place all checks which might fail prior to a call to any driver mmap hook. This eliminates an entire class of errors, makes the code easier to reason about and more robust. | ||||
| CVE-2024-49967 | 2025-01-07 | 7.1 High | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2022-48766 | 1 Linux | 1 Linux Kernel | 2025-01-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wrap dcn301_calculate_wm_and_dlg for FPU. Mirrors the logic for dcn30. Cue lots of WARNs and some kernel panics without this fix. | ||||
| CVE-2023-6605 | 2025-01-06 | 7.2 High | ||
| A flaw was found in FFmpeg's DASH playlist support. This vulnerability allows arbitrary HTTP GET requests to be made on behalf of the machine running FFmpeg via a crafted DASH playlist containing malicious URLs. | ||||
| CVE-2023-6604 | 2025-01-06 | 5.3 Medium | ||
| A flaw was found in FFmpeg. This vulnerability allows unexpected additional CPU load and storage consumption, potentially leading to degraded performance or denial of service via the demuxing of arbitrary data as XBIN-formatted data without proper format validation. | ||||
| CVE-2023-6601 | 2025-01-06 | 4.7 Medium | ||
| A flaw was found in FFmpeg's HLS demuxer. This vulnerability allows bypassing unsafe file extension checks and triggering arbitrary demuxers via base64-encoded data URIs appended with specific file extensions. | ||||
| CVE-2023-6602 | 2025-01-06 | 5.3 Medium | ||
| A flaw was found in FFmpeg's TTY Demuxer. This vulnerability allows possible data exfiltration via improper parsing of non-TTY-compliant input files in HLS playlists. | ||||
| CVE-2023-6603 | 2025-01-06 | 7.5 High | ||
| A flaw was found in FFmpeg's HLS playlist parsing. This vulnerability allows a denial of service via a maliciously crafted HLS playlist that triggers a null pointer dereference during initialization. | ||||
| CVE-2021-47146 | 1 Linux | 1 Linux Kernel | 2024-12-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mld: fix panic in mld_newpack() mld_newpack() doesn't allow to allocate high order page, only order-0 allocation is allowed. If headroom size is too large, a kernel panic could occur in skb_put(). Test commands: ip netns del A ip netns del B ip netns add A ip netns add B ip link add veth0 type veth peer name veth1 ip link set veth0 netns A ip link set veth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set veth0 up ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set lo up ip netns exec B ip link set veth1 up ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1 for i in {1..99} do let A=$i-1 ip netns exec A ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100 ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i ip netns exec A ip link set ip6gre$i up ip netns exec B ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100 ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i ip netns exec B ip link set ip6gre$i up done Splat looks like: kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x15d/0x15f Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83 41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20 RSP: 0018:ffff88810091f820 EFLAGS: 00010282 RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000 RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031 R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028 R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0 FS: 0000000000000000(0000) GS:ffff888117c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 skb_put.cold.104+0x22/0x22 ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? rcu_read_lock_sched_held+0x91/0xc0 mld_newpack+0x398/0x8f0 ? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600 ? lock_contended+0xc40/0xc40 add_grhead.isra.33+0x280/0x380 add_grec+0x5ca/0xff0 ? mld_sendpack+0xf40/0xf40 ? lock_downgrade+0x690/0x690 mld_send_initial_cr.part.34+0xb9/0x180 ipv6_mc_dad_complete+0x15d/0x1b0 addrconf_dad_completed+0x8d2/0xbb0 ? lock_downgrade+0x690/0x690 ? addrconf_rs_timer+0x660/0x660 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 Allowing high order page allocation could fix this problem. | ||||
| CVE-2023-52759 | 2024-12-19 | 5.5 Medium | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2024-53138 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: kTLS, Fix incorrect page refcounting The kTLS tx handling code is using a mix of get_page() and page_ref_inc() APIs to increment the page reference. But on the release path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used. This is an issue when using pages from large folios: the get_page() references are stored on the folio page while the page_ref_inc() references are stored directly in the given page. On release the folio page will be dereferenced too many times. This was found while doing kTLS testing with sendfile() + ZC when the served file was read from NFS on a kernel with NFS large folios support (commit 49b29a573da8 ("nfs: add support for large folios")). | ||||
| CVE-2024-53135 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are myriad bugs in the implementation, some of which are fatal to the guest, and others which put the stability and health of the host at risk. For guest fatalities, the most glaring issue is that KVM fails to ensure tracing is disabled, and *stays* disabled prior to VM-Enter, which is necessary as hardware disallows loading (the guest's) RTIT_CTL if tracing is enabled (enforced via a VMX consistency check). Per the SDM: If the logical processor is operating with Intel PT enabled (if IA32_RTIT_CTL.TraceEn = 1) at the time of VM entry, the "load IA32_RTIT_CTL" VM-entry control must be 0. On the host side, KVM doesn't validate the guest CPUID configuration provided by userspace, and even worse, uses the guest configuration to decide what MSRs to save/load at VM-Enter and VM-Exit. E.g. configuring guest CPUID to enumerate more address ranges than are supported in hardware will result in KVM trying to passthrough, save, and load non-existent MSRs, which generates a variety of WARNs, ToPA ERRORs in the host, a potential deadlock, etc. | ||||
| CVE-2024-53132 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix "Missing outer runtime PM protection" warning Fix the following drm_WARN: [953.586396] xe 0000:00:02.0: [drm] Missing outer runtime PM protection ... <4> [953.587090] ? xe_pm_runtime_get_noresume+0x8d/0xa0 [xe] <4> [953.587208] guc_exec_queue_add_msg+0x28/0x130 [xe] <4> [953.587319] guc_exec_queue_fini+0x3a/0x40 [xe] <4> [953.587425] xe_exec_queue_destroy+0xb3/0xf0 [xe] <4> [953.587515] xe_oa_release+0x9c/0xc0 [xe] (cherry picked from commit b107c63d2953907908fd0cafb0e543b3c3167b75) | ||||
| CVE-2024-53109 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nommu: pass NULL argument to vma_iter_prealloc() When deleting a vma entry from a maple tree, it has to pass NULL to vma_iter_prealloc() in order to calculate internal state of the tree, but it passed a wrong argument. As a result, nommu kernels crashed upon accessing a vma iterator, such as acct_collect() reading the size of vma entries after do_munmap(). This commit fixes this issue by passing a right argument to the preallocation call. | ||||
| CVE-2024-53048 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix crash on probe for DPLL enabled E810 LOM The E810 Lan On Motherboard (LOM) design is vendor specific. Intel provides the reference design, but it is up to vendor on the final product design. For some cases, like Linux DPLL support, the static values defined in the driver does not reflect the actual LOM design. Current implementation of dpll pins is causing the crash on probe of the ice driver for such DPLL enabled E810 LOM designs: WARNING: (...) at drivers/dpll/dpll_core.c:495 dpll_pin_get+0x2c4/0x330 ... Call Trace: <TASK> ? __warn+0x83/0x130 ? dpll_pin_get+0x2c4/0x330 ? report_bug+0x1b7/0x1d0 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? dpll_pin_get+0x117/0x330 ? dpll_pin_get+0x2c4/0x330 ? dpll_pin_get+0x117/0x330 ice_dpll_get_pins.isra.0+0x52/0xe0 [ice] ... The number of dpll pins enabled by LOM vendor is greater than expected and defined in the driver for Intel designed NICs, which causes the crash. Prevent the crash and allow generic pin initialization within Linux DPLL subsystem for DPLL enabled E810 LOM designs. Newly designed solution for described issue will be based on "per HW design" pin initialization. It requires pin information dynamically acquired from the firmware and is already in progress, planned for next-tree only. | ||||
| CVE-2024-50303 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: resource,kexec: walk_system_ram_res_rev must retain resource flags walk_system_ram_res_rev() erroneously discards resource flags when passing the information to the callback. This causes systems with IORESOURCE_SYSRAM_DRIVER_MANAGED memory to have these resources selected during kexec to store kexec buffers if that memory happens to be at placed above normal system ram. This leads to undefined behavior after reboot. If the kexec buffer is never touched, nothing happens. If the kexec buffer is touched, it could lead to a crash (like below) or undefined behavior. Tested on a system with CXL memory expanders with driver managed memory, TPM enabled, and CONFIG_IMA_KEXEC=y. Adding printk's showed the flags were being discarded and as a result the check for IORESOURCE_SYSRAM_DRIVER_MANAGED passes. find_next_iomem_res: name(System RAM (kmem)) start(10000000000) end(1034fffffff) flags(83000200) locate_mem_hole_top_down: start(10000000000) end(1034fffffff) flags(0) [.] BUG: unable to handle page fault for address: ffff89834ffff000 [.] #PF: supervisor read access in kernel mode [.] #PF: error_code(0x0000) - not-present page [.] PGD c04c8bf067 P4D c04c8bf067 PUD c04c8be067 PMD 0 [.] Oops: 0000 [#1] SMP [.] RIP: 0010:ima_restore_measurement_list+0x95/0x4b0 [.] RSP: 0018:ffffc900000d3a80 EFLAGS: 00010286 [.] RAX: 0000000000001000 RBX: 0000000000000000 RCX: ffff89834ffff000 [.] RDX: 0000000000000018 RSI: ffff89834ffff000 RDI: ffff89834ffff018 [.] RBP: ffffc900000d3ba0 R08: 0000000000000020 R09: ffff888132b8a900 [.] R10: 4000000000000000 R11: 000000003a616d69 R12: 0000000000000000 [.] R13: ffffffff8404ac28 R14: 0000000000000000 R15: ffff89834ffff000 [.] FS: 0000000000000000(0000) GS:ffff893d44640000(0000) knlGS:0000000000000000 [.] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [.] ata5: SATA link down (SStatus 0 SControl 300) [.] CR2: ffff89834ffff000 CR3: 000001034d00f001 CR4: 0000000000770ef0 [.] PKRU: 55555554 [.] Call Trace: [.] <TASK> [.] ? __die+0x78/0xc0 [.] ? page_fault_oops+0x2a8/0x3a0 [.] ? exc_page_fault+0x84/0x130 [.] ? asm_exc_page_fault+0x22/0x30 [.] ? ima_restore_measurement_list+0x95/0x4b0 [.] ? template_desc_init_fields+0x317/0x410 [.] ? crypto_alloc_tfm_node+0x9c/0xc0 [.] ? init_ima_lsm+0x30/0x30 [.] ima_load_kexec_buffer+0x72/0xa0 [.] ima_init+0x44/0xa0 [.] __initstub__kmod_ima__373_1201_init_ima7+0x1e/0xb0 [.] ? init_ima_lsm+0x30/0x30 [.] do_one_initcall+0xad/0x200 [.] ? idr_alloc_cyclic+0xaa/0x110 [.] ? new_slab+0x12c/0x420 [.] ? new_slab+0x12c/0x420 [.] ? number+0x12a/0x430 [.] ? sysvec_apic_timer_interrupt+0xa/0x80 [.] ? asm_sysvec_apic_timer_interrupt+0x16/0x20 [.] ? parse_args+0xd4/0x380 [.] ? parse_args+0x14b/0x380 [.] kernel_init_freeable+0x1c1/0x2b0 [.] ? rest_init+0xb0/0xb0 [.] kernel_init+0x16/0x1a0 [.] ret_from_fork+0x2f/0x40 [.] ? rest_init+0xb0/0xb0 [.] ret_from_fork_asm+0x11/0x20 [.] </TASK> | ||||
| CVE-2024-50275 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2024-12-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64/sve: Discard stale CPU state when handling SVE traps The logic for handling SVE traps manipulates saved FPSIMD/SVE state incorrectly, and a race with preemption can result in a task having TIF_SVE set and TIF_FOREIGN_FPSTATE clear even though the live CPU state is stale (e.g. with SVE traps enabled). This has been observed to result in warnings from do_sve_acc() where SVE traps are not expected while TIF_SVE is set: | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ Warnings of this form have been reported intermittently, e.g. https://lore.kernel.org/linux-arm-kernel/CA+G9fYtEGe_DhY2Ms7+L7NKsLYUomGsgqpdBj+QwDLeSg=JhGg@mail.gmail.com/ https://lore.kernel.org/linux-arm-kernel/000000000000511e9a060ce5a45c@google.com/ The race can occur when the SVE trap handler is preempted before and after manipulating the saved FPSIMD/SVE state, starting and ending on the same CPU, e.g. | void do_sve_acc(unsigned long esr, struct pt_regs *regs) | { | // Trap on CPU 0 with TIF_SVE clear, SVE traps enabled | // task->fpsimd_cpu is 0. | // per_cpu_ptr(&fpsimd_last_state, 0) is task. | | ... | | // Preempted; migrated from CPU 0 to CPU 1. | // TIF_FOREIGN_FPSTATE is set. | | get_cpu_fpsimd_context(); | | if (test_and_set_thread_flag(TIF_SVE)) | WARN_ON(1); /* SVE access shouldn't have trapped */ | | sve_init_regs() { | if (!test_thread_flag(TIF_FOREIGN_FPSTATE)) { | ... | } else { | fpsimd_to_sve(current); | current->thread.fp_type = FP_STATE_SVE; | } | } | | put_cpu_fpsimd_context(); | | // Preempted; migrated from CPU 1 to CPU 0. | // task->fpsimd_cpu is still 0 | // If per_cpu_ptr(&fpsimd_last_state, 0) is still task then: | // - Stale HW state is reused (with SVE traps enabled) | // - TIF_FOREIGN_FPSTATE is cleared | // - A return to userspace skips HW state restore | } Fix the case where the state is not live and TIF_FOREIGN_FPSTATE is set by calling fpsimd_flush_task_state() to detach from the saved CPU state. This ensures that a subsequent context switch will not reuse the stale CPU state, and will instead set TIF_FOREIGN_FPSTATE, forcing the new state to be reloaded from memory prior to a return to userspace. | ||||
| CVE-2024-50263 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fork: only invoke khugepaged, ksm hooks if no error There is no reason to invoke these hooks early against an mm that is in an incomplete state. The change in commit d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()") makes this more pertinent as we may be in a state where entries in the maple tree are not yet consistent. Their placement early in dup_mmap() only appears to have been meaningful for early error checking, and since functionally it'd require a very small allocation to fail (in practice 'too small to fail') that'd only occur in the most dire circumstances, meaning the fork would fail or be OOM'd in any case. Since both khugepaged and KSM tracking are there to provide optimisations to memory performance rather than critical functionality, it doesn't really matter all that much if, under such dire memory pressure, we fail to register an mm with these. As a result, we follow the example of commit d2081b2bf819 ("mm: khugepaged: make khugepaged_enter() void function") and make ksm_fork() a void function also. We only expose the mm to these functions once we are done with them and only if no error occurred in the fork operation. | ||||
| CVE-2024-50201 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/radeon: Fix encoder->possible_clones Include the encoder itself in its possible_clones bitmask. In the past nothing validated that drivers were populating possible_clones correctly, but that changed in commit 74d2aacbe840 ("drm: Validate encoder->possible_clones"). Looks like radeon never got the memo and is still not following the rules 100% correctly. This results in some warnings during driver initialization: Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7) WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c ... (cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db) | ||||
| CVE-2024-50200 | 2024-12-19 | 7.1 High | ||
| In the Linux kernel, the following vulnerability has been resolved: maple_tree: correct tree corruption on spanning store Patch series "maple_tree: correct tree corruption on spanning store", v3. There has been a nasty yet subtle maple tree corruption bug that appears to have been in existence since the inception of the algorithm. This bug seems far more likely to happen since commit f8d112a4e657 ("mm/mmap: avoid zeroing vma tree in mmap_region()"), which is the point at which reports started to be submitted concerning this bug. We were made definitely aware of the bug thanks to the kind efforts of Bert Karwatzki who helped enormously in my being able to track this down and identify the cause of it. The bug arises when an attempt is made to perform a spanning store across two leaf nodes, where the right leaf node is the rightmost child of the shared parent, AND the store completely consumes the right-mode node. This results in mas_wr_spanning_store() mitakenly duplicating the new and existing entries at the maximum pivot within the range, and thus maple tree corruption. The fix patch corrects this by detecting this scenario and disallowing the mistaken duplicate copy. The fix patch commit message goes into great detail as to how this occurs. This series also includes a test which reliably reproduces the issue, and asserts that the fix works correctly. Bert has kindly tested the fix and confirmed it resolved his issues. Also Mikhail Gavrilov kindly reported what appears to be precisely the same bug, which this fix should also resolve. This patch (of 2): There has been a subtle bug present in the maple tree implementation from its inception. This arises from how stores are performed - when a store occurs, it will overwrite overlapping ranges and adjust the tree as necessary to accommodate this. A range may always ultimately span two leaf nodes. In this instance we walk the two leaf nodes, determine which elements are not overwritten to the left and to the right of the start and end of the ranges respectively and then rebalance the tree to contain these entries and the newly inserted one. This kind of store is dubbed a 'spanning store' and is implemented by mas_wr_spanning_store(). In order to reach this stage, mas_store_gfp() invokes mas_wr_preallocate(), mas_wr_store_type() and mas_wr_walk() in turn to walk the tree and update the object (mas) to traverse to the location where the write should be performed, determining its store type. When a spanning store is required, this function returns false stopping at the parent node which contains the target range, and mas_wr_store_type() marks the mas->store_type as wr_spanning_store to denote this fact. When we go to perform the store in mas_wr_spanning_store(), we first determine the elements AFTER the END of the range we wish to store (that is, to the right of the entry to be inserted) - we do this by walking to the NEXT pivot in the tree (i.e. r_mas.last + 1), starting at the node we have just determined contains the range over which we intend to write. We then turn our attention to the entries to the left of the entry we are inserting, whose state is represented by l_mas, and copy these into a 'big node', which is a special node which contains enough slots to contain two leaf node's worth of data. We then copy the entry we wish to store immediately after this - the copy and the insertion of the new entry is performed by mas_store_b_node(). After this we copy the elements to the right of the end of the range which we are inserting, if we have not exceeded the length of the node (i.e. r_mas.offset <= r_mas.end). Herein lies the bug - under very specific circumstances, this logic can break and corrupt the maple tree. Consider the following tree: Height 0 Root Node / \ pivot = 0xffff / \ pivot = ULONG_MAX / ---truncated--- | ||||