| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenClaw before 2026.4.29 contains a session visibility check bypass vulnerability in shared memory search that allows authenticated callers to access memory entries without proper authorization. Attackers can skip session visibility guards on the search path to retrieve memory entries that should not be visible to their session. |
| OpenClaw before 2026.5.6 contains a hook bypass vulnerability where skill commands routed through the affected dispatch path skip before-tool-call hook coverage. Attackers can exploit this by sending skill commands through the vulnerable dispatch path to bypass hook-based auditing and policy enforcement mechanisms. |
| MariaDB server is a community developed fork of MySQL server. From versions 10.6.1 to before 10.6.26, 10.11.1 to before 10.11.17, 11.4.1 to before 11.4.11, 11.8.1 to before 11.8.7, and 12.3.1, MariaDB on WIndows with installed CONNECT engine and enabled REST support interpolated table HTTP attribute into the curl command line without proper sanitizing. This allows the user to execute shell commands on the server. This issue has been patched in versions 10.6.26, 10.11.17, 11.4.11, 11.8.7, and 12.3.2. |
| In the Linux kernel, the following vulnerability has been resolved:
nbd: defer config put in recv_work
There is one uaf issue in recv_work when running NBD_CLEAR_SOCK and
NBD_CMD_RECONFIGURE:
nbd_genl_connect // conf_ref=2 (connect and recv_work A)
nbd_open // conf_ref=3
recv_work A done // conf_ref=2
NBD_CLEAR_SOCK // conf_ref=1
nbd_genl_reconfigure // conf_ref=2 (trigger recv_work B)
close nbd // conf_ref=1
recv_work B
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Or only running NBD_CLEAR_SOCK:
nbd_genl_connect // conf_ref=2
nbd_open // conf_ref=3
NBD_CLEAR_SOCK // conf_ref=2
close nbd
nbd_release
config_put // conf_ref=1
recv_work
config_put // conf_ref=0
atomic_dec(&config->recv_threads); -> UAF
Commit 87aac3a80af5 ("nbd: call nbd_config_put() before notifying the
waiter") moved nbd_config_put() to run before waking up the waiter in
recv_work, in order to ensure that nbd_start_device_ioctl() would not
be woken up while nbd->task_recv was still uncleared.
However, in nbd_start_device_ioctl(), after being woken up it explicitly
calls flush_workqueue() to make sure all current works are finished.
Therefore, there is no need to move the config put ahead of the wakeup.
Move nbd_config_put() to the end of recv_work, so that the reference is
held for the whole lifetime of the worker thread. This makes sure the
config cannot be freed while recv_work is still running, even if clear
+ reconfigure interleave.
In addition, we don't need to worry about recv_work dropping the last
nbd_put (which causes deadlock):
path A (netlink with NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=1 (trigger recv_work)
open nbd // nbd_refs=2
NBD_CLEAR_SOCK
close nbd
nbd_release
nbd_disconnect_and_put
flush_workqueue // recv_work done
nbd_config_put
nbd_put // nbd_refs=1
nbd_put // nbd_refs=0
queue_work
path B (netlink without NBD_CFLAG_DESTROY_ON_DISCONNECT):
connect // nbd_refs=2 (trigger recv_work)
open nbd // nbd_refs=3
NBD_CLEAR_SOCK // conf_refs=2
close nbd
nbd_release
nbd_config_put // conf_refs=1
nbd_put // nbd_refs=2
recv_work done // conf_refs=0, nbd_refs=1
rmmod // nbd_refs=0
Depends-on: e2daec488c57 ("nbd: Fix hungtask when nbd_config_put") |
| When a user's access to mint tokens for a service account is revoked, it is sometimes still possible to do so for a few seconds after the event. The user will eventually lose access to do this. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pNFS: Clear NFS_INO_LAYOUTCOMMIT in pnfs_mark_layout_stateid_invalid
Fixes a crash when layout is null during this call stack:
write_inode
-> nfs4_write_inode
-> pnfs_layoutcommit_inode
pnfs_set_layoutcommit relies on the lseg refcount to keep the layout
around. Need to clear NFS_INO_LAYOUTCOMMIT otherwise we might attempt
to reference a null layout. |
| Vulnerability in the Oracle WebCenter Content product of Oracle Fusion Middleware (component: Content Server). The supported version that is affected is 14.1.2.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle WebCenter Content. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle WebCenter Content, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle WebCenter Content accessible data as well as unauthorized update, insert or delete access to some of Oracle WebCenter Content accessible data. CVSS 3.1 Base Score 8.2 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:L/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: asymmetric_keys - prevent overflow in asymmetric_key_generate_id
Use check_add_overflow() to guard against potential integer overflows
when adding the binary blob lengths and the size of an asymmetric_key_id
structure and return ERR_PTR(-EOVERFLOW) accordingly. This prevents a
possible buffer overflow when copying data from potentially malicious
X.509 certificate fields that can be arbitrarily large, such as ASN.1
INTEGER serial numbers, issuer names, etc. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix middle attribute validation in push_nsh() action
The push_nsh() action structure looks like this:
OVS_ACTION_ATTR_PUSH_NSH(OVS_KEY_ATTR_NSH(OVS_NSH_KEY_ATTR_BASE,...))
The outermost OVS_ACTION_ATTR_PUSH_NSH attribute is OK'ed by the
nla_for_each_nested() inside __ovs_nla_copy_actions(). The innermost
OVS_NSH_KEY_ATTR_BASE/MD1/MD2 are OK'ed by the nla_for_each_nested()
inside nsh_key_put_from_nlattr(). But nothing checks if the attribute
in the middle is OK. We don't even check that this attribute is the
OVS_KEY_ATTR_NSH. We just do a double unwrap with a pair of nla_data()
calls - first time directly while calling validate_push_nsh() and the
second time as part of the nla_for_each_nested() macro, which isn't
safe, potentially causing invalid memory access if the size of this
attribute is incorrect. The failure may not be noticed during
validation due to larger netlink buffer, but cause trouble later during
action execution where the buffer is allocated exactly to the size:
BUG: KASAN: slab-out-of-bounds in nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch]
Read of size 184 at addr ffff88816459a634 by task a.out/22624
CPU: 8 UID: 0 PID: 22624 6.18.0-rc7+ #115 PREEMPT(voluntary)
Call Trace:
<TASK>
dump_stack_lvl+0x51/0x70
print_address_description.constprop.0+0x2c/0x390
kasan_report+0xdd/0x110
kasan_check_range+0x35/0x1b0
__asan_memcpy+0x20/0x60
nsh_hdr_from_nlattr+0x1dd/0x6a0 [openvswitch]
push_nsh+0x82/0x120 [openvswitch]
do_execute_actions+0x1405/0x2840 [openvswitch]
ovs_execute_actions+0xd5/0x3b0 [openvswitch]
ovs_packet_cmd_execute+0x949/0xdb0 [openvswitch]
genl_family_rcv_msg_doit+0x1d6/0x2b0
genl_family_rcv_msg+0x336/0x580
genl_rcv_msg+0x9f/0x130
netlink_rcv_skb+0x11f/0x370
genl_rcv+0x24/0x40
netlink_unicast+0x73e/0xaa0
netlink_sendmsg+0x744/0xbf0
__sys_sendto+0x3d6/0x450
do_syscall_64+0x79/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Let's add some checks that the attribute is properly sized and it's
the only one attribute inside the action. Technically, there is no
real reason for OVS_KEY_ATTR_NSH to be there, as we know that we're
pushing an NSH header already, it just creates extra nesting, but
that's how uAPI works today. So, keeping as it is. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs4_setup_readdir(): insufficient locking for ->d_parent->d_inode dereferencing
Theoretically it's an oopsable race, but I don't believe one can manage
to hit it on real hardware; might become doable on a KVM, but it still
won't be easy to attack.
Anyway, it's easy to deal with - since xdr_encode_hyper() is just a call of
put_unaligned_be64(), we can put that under ->d_lock and be done with that. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Handle error code returned by ima_filter_rule_match()
In ima_match_rules(), if ima_filter_rule_match() returns -ENOENT due to
the rule being NULL, the function incorrectly skips the 'if (!rc)' check
and sets 'result = true'. The LSM rule is considered a match, causing
extra files to be measured by IMA.
This issue can be reproduced in the following scenario:
After unloading the SELinux policy module via 'semodule -d', if an IMA
measurement is triggered before ima_lsm_rules is updated,
in ima_match_rules(), the first call to ima_filter_rule_match() returns
-ESTALE. This causes the code to enter the 'if (rc == -ESTALE &&
!rule_reinitialized)' block, perform ima_lsm_copy_rule() and retry. In
ima_lsm_copy_rule(), since the SELinux module has been removed, the rule
becomes NULL, and the second call to ima_filter_rule_match() returns
-ENOENT. This bypasses the 'if (!rc)' check and results in a false match.
Call trace:
selinux_audit_rule_match+0x310/0x3b8
security_audit_rule_match+0x60/0xa0
ima_match_rules+0x2e4/0x4a0
ima_match_policy+0x9c/0x1e8
ima_get_action+0x48/0x60
process_measurement+0xf8/0xa98
ima_bprm_check+0x98/0xd8
security_bprm_check+0x5c/0x78
search_binary_handler+0x6c/0x318
exec_binprm+0x58/0x1b8
bprm_execve+0xb8/0x130
do_execveat_common.isra.0+0x1a8/0x258
__arm64_sys_execve+0x48/0x68
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x44/0x200
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x3c8/0x3d0
Fix this by changing 'if (!rc)' to 'if (rc <= 0)' to ensure that error
codes like -ENOENT do not bypass the check and accidentally result in a
successful match. |
| IBM Qiskit SDK 0.43.0 through 2.5.0 could allow an attacker to trigger a segmentation fault leading to a denial of service due to uncontrolled recursion in the parser. |
| OpenClaw before 2026.4.25 contains an input validation vulnerability in tool group policy callers that accept unvalidated group IDs. Attackers who can supply a group ID to the policy resolver could trigger incorrect group-policy decisions for tool invocations, potentially bypassing intended access controls. |
| OpenClaw before 2026.5.12 contains a bootstrap token replay vulnerability allowing callers with pending token access to reuse tokens with broader requested scopes. Attackers can replay bootstrap tokens before approval to escalate pairing authority beyond intended scope limits. |
| OpenClaw before 2026.5.12 contains an argument pattern validation bypass in the exec allowlist that allows attackers to execute disallowed arguments for allowlisted executables on Linux and macOS systems. Attackers can bypass configured argPattern restrictions by directly invoking allowlisted executables with unrestricted arguments, potentially enabling unauthorized file access, network access, or command execution. |
| OpenClaw before 2026.4.25 contains a scope containment bypass vulnerability in device re-pairing that allows authenticated operators to restore broader scopes than intended by submitting empty-scope re-pairing requests. Attackers can exploit this by sending re-pairing requests with empty scope sets to skip containment guards and retain unauthorized device access. |
| OpenClaw before 2026.4.25 contains a control scope enforcement bypass vulnerability in the focus command that allows authenticated callers to execute the command without proper authorization checks. Attackers can trigger the focus command to change focus state outside intended caller authority, potentially enabling unauthorized operations depending on gateway configuration and input trust levels. |
| OpenClaw before 2026.5.6 contains a privilege escalation vulnerability in the Active Memory write scope that allows Gateway operators with operator.write access to modify global configuration without requiring operator.admin privileges. Attackers with operator.write access can exploit insufficient scope validation to apply unauthorized configuration changes beyond the intended write scope. |
| OpenClaw before 2026.5.12 contains an information disclosure vulnerability in streamable-http MCP servers that forwards operator-configured custom headers during cross-origin redirects. Attackers controlling or compromising an MCP endpoint can redirect requests to exfiltrate sensitive headers like API keys or tenant-routing credentials to attacker-controlled origins. |
| A flaw was found in libXpm. A local user with low privileges could exploit an Out-of-Bounds Read vulnerability in the `xpmNextWord()` function by processing a specially crafted or very small XPM (X PixMap) image file. This improper validation of file boundaries can cause an internal pointer to read beyond the file's end, leading to application crashes and Denial of Service conditions. |
