| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Stack-based Buffer Overflow vulnerability in Erlang OTP erts (inet_drv) allows an unauthenticated remote attacker to crash the BEAM VM by sending a crafted SCTP ERROR chunk.
The sctp_parse_error_chunk function in erts/emulator/drivers/common/inet_drv.c parses SCTP ERROR chunks and writes cause codes into a fixed-size stack-allocated ErlDrvTermData spec[] array without checking bounds. A remote attacker who has established an SCTP association to a listening port can send a single crafted SCTP ERROR chunk containing enough cause codes to overflow the stack buffer, crashing the VM. The attacker can only write 16-bit values interleaved with a fixed tag, so the overflow does not provide a controlled return address, limiting exploitation to Denial of Service.
A crafted SCTP ERROR chunk may also leak bits and pieces of Erlang VM memory into the received error packet observed by the Erlang process. Such data is already readable by the user running the Erlang VM, so the disclosure scope is limited.
This issue affects OTP from OTP 17.0 before 27.3.4.13, 28.5.0.2 and 29.0.2, corresponding to erts from 6.0 before 15.2.7.9, 16.4.0.2 and 17.0.2. |
| Reliance on IP Address for Authentication vulnerability in Erlang/OTP ssl (inet_tls_dist module) allows unauthenticated bypass of the distribution-over-TLS LAN allowlist.
The inet_tls_dist:check_ip/1 function, which enforces a LAN allowlist for Erlang distribution over TLS, calls inet:sockname/1 instead of inet:peername/1 to obtain the peer's IP address. Because inet:sockname/1 returns the local socket address, both the local IP and the supposed peer IP resolve to the same value, causing the subnet mask comparison to always succeed regardless of the actual remote address. Any holder of a CA-signed TLS certificate can therefore bypass the LAN restriction and gain full Erlang distribution access to the node, including rpc:call/4 and code:load_binary/3.
This vulnerability is associated with program file lib/ssl/src/inet_tls_dist.erl.
This issue affects OTP from OTP 26.0 before 29.0.2, 28.5.0.2 and 27.3.4.13 corresponding to ssl from 11.0 before 11.7.2, 11.6.0.2 and 11.2.12.9. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix buffer overflow when parsing NFS reparse points
ReparseDataLength is sum of the InodeType size and DataBuffer size.
So to get DataBuffer size it is needed to subtract InodeType's size from
ReparseDataLength.
Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer
at position after the end of the buffer because it does not subtract
InodeType size from the length. Fix this problem and correctly subtract
variable len.
Member InodeType is present only when reparse buffer is large enough. Check
for ReparseDataLength before accessing InodeType to prevent another invalid
memory access.
Major and minor rdev values are present also only when reparse buffer is
large enough. Check for reparse buffer size before calling reparse_mkdev(). |
| Observable Timing Discrepancy vulnerability in Erlang/OTP ssh (ssh_auth, ssh_options modules) allows unauthenticated remote username enumeration via timing side-channel in password authentication.
When the SSH daemon is configured with the user_passwords or password option, ssh_auth:check_password/3 performs a PBKDF2-SHA256 computation with 600,000 iterations (~300ms) for valid usernames, but returns immediately (~0ms) for invalid usernames via the ssh_options:get_password_option/2 path. This timing difference is detectable in a single authentication attempt and allows an unauthenticated attacker to distinguish valid from invalid usernames.
The user_passwords and password options are documented as intended for test purposes; the recommended alternative is pwdfun, which is not affected by this vulnerability.
This vulnerability is associated with program files lib/ssh/src/ssh_auth.erl and lib/ssh/src/ssh_options.erl.
This issue affects OTP from OTP 29.0 before 29.0.2 corresponding to ssh from 6.0 before 6.0.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access
ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware. We shouldn't
trust it blindly.
This patch adds a sanity check of the array index to fit in the array
size. |
| Sensitive Data Exposure vulnerability in Erlang OTP inets (httpc_response module) allows Retrieve Embedded Sensitive Data.
The httpc client forwards the Authorization and Proxy-Authorization request headers to redirect targets without checking whether the redirect crosses an origin boundary. httpc_response:redirect/2 constructs the redirected request by updating only the host field of the header record; all other fields (including authorization and proxy_authorization) are copied verbatim. The redirect target host is never compared against the original host.
autoredirect defaults to true, so this affects all httpc callers that do not explicitly disable automatic redirects.
An attacker who controls a server that the victim contacts via httpc can issue a cross-origin 3xx redirect to a server they also control. The Authorization header (including Basic credentials derived from URL userinfo via httpc_request:handle_user_info/2) is forwarded to the redirect target, allowing credential theft. The same applies to the Proxy-Authorization header.
This vulnerability is associated with program files lib/inets/src/http_client/httpc_response.erl.
This issue affects OTP from 17.0 before 29.0.2, 28.5.0.2 and 27.3.4.13 corresponding to inets from 5.10 before 9.7.1, 9.6.2.2 and 9.3.2.6. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Erlang OTP ssh (ssh_sftpd module) allows File Discovery.
The SSH_FXP_READLINK handler in ssh_sftpd sends the raw result of file:read_link/2 to the client without calling chroot_filename/2 to strip the backend root prefix. An authenticated SFTP client can create a symlink inside the chroot pointing to /; ssh_sftpd resolves the target to the absolute backend root and stores it on disk. Reading the symlink back via SSH_FXP_READLINK returns that absolute path, for example /data/sftp, instead of the chrooted value /.
The information disclosed is the absolute filesystem path of the SFTP root directory and of any symlink targets within it. No file contents, credentials, or access to paths outside the root directory are obtainable through this issue alone.
This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl.
This issue affects OTP from OTP 17.0 before 29.0.2, 28.5.0.2 and 27.3.4.13 corresponding to ssh from 3.0.1 before 6.0.1, 5.5.2.1 and 5.2.11.8. |
| Stack-based Buffer Overflow vulnerability in Erlang OTP (erl_interface) allows Stack-based Buffer Overflow.
This vulnerability is associated with program file lib/erl_interface/src/misc/ei_printterm.c and program routine ei_s_print_term.
The C function ei_s_print_term uses an internal 2000-character stack buffer to format terms. When called with an encoded Erlang term containing a very large integer (encoded representation exceeding 2000 characters), the buffer overflows. The overflow bytes are restricted to the ASCII values of 0-9 and A-F, which limits exploitation to Denial of Service.
The companion function ei_print_term, which prints directly to a FILE instead of a memory buffer, does not contain this bug.
This issue affects OTP from OTP 17.0 before 27.3.4.13, 28.5.0.2 and 29.0.2, corresponding to erl_interface from 3.7.16 before 5.5.2.1, 5.7.0.1 and 5.8.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix timer use-after-free on failed mount
Syzbot has found an ODEBUG bug in ext4_fill_super
The del_timer_sync function cancels the s_err_report timer,
which reminds about filesystem errors daily. We should
guarantee the timer is no longer active before kfree(sbi).
When filesystem mounting fails, the flow goes to failed_mount3,
where an error occurs when ext4_stop_mmpd is called, causing
a read I/O failure. This triggers the ext4_handle_error function
that ultimately re-arms the timer,
leaving the s_err_report timer active before kfree(sbi) is called.
Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd. |
| OpenClaw before 2026.5.6 contains an authorization bypass vulnerability in native command handling that allows authenticated senders to execute owner-only commands without proper policy enforcement. Attackers can trigger native command handling to bypass the configured owner-command access control, potentially executing privileged commands from unauthorized users. |
| MISP contained multiple mass assignment vulnerabilities in the handling of collections, tag collections, event delegations, and shadow attributes. Several controller actions accepted user-supplied fields that should have remained server-controlled, including record identifiers and ownership-related fields such as id, org_id, orgc_id, and user_id.
An authenticated attacker with access to the affected endpoints could craft requests containing protected fields in order to alter object ownership, redirect an update to another record, overwrite existing event delegation requests, or modify shadow attribute proposals belonging to another organization. This could result in unauthorized modification of MISP objects and, depending on object visibility and sharing configuration, unauthorized access to or transfer of sensitive threat intelligence data.
The issue was fixed by explicitly pinning ownership and identity fields to their stored values during edit operations and by removing user-supplied primary keys from create-only save paths.
Affected components:
* CollectionsController::edit()
* EventDelegationsController::delegateEvent()
* ShadowAttributesController::edit()
* TagCollectionsController::edit()915
* TagCollectionsController::editWithTags()
Attack requirements:
The attacker must be authenticated and able to reach the affected MISP endpoints. No user interaction is required. |
| A mass assignment vulnerability exists in MISP’s sharing group creation endpoint. When creating a new sharing group, the controller did not remove a user-supplied id field before saving the submitted data. In CakePHP, supplying a primary key in the save data can cause a create() followed by save() operation to update an existing record instead of creating a new one.
An authenticated user with permission to add sharing groups could therefore submit the identifier of an existing sharing group and modify that sharing group without passing the normal edit access-control checks. This may allow the attacker to take over or alter sharing groups they do not otherwise have access to, potentially affecting the confidentiality and integrity of information shared through those groups.
Affected component:
app/Controller/SharingGroupsController.php, add() action |
| MISP contains an insecure default configuration in which the Security.check_sec_fetch_site_header control is disabled. When this setting is disabled, state-changing requests such as POST, PUT, or AJAX requests are not restricted based on the browser-provided Sec-Fetch-Site header. A remote unauthenticated attacker could craft a malicious web page that causes an authenticated MISP user’s browser to issue cross-site requests to MISP automation endpoints. If successful, the forged requests may be processed with the privileges of the victim user, potentially allowing unauthorized modification of MISP data or configuration. Enabling Security.check_sec_fetch_site_header mitigates this issue, although operators of multi-homed MISP deployments should validate the setting before enforcing it. |
| AgenticMail gives AI agents real email addresses and phone numbers. Prior to version 0.9.27, @agenticmail/mcp exposes a Streamable HTTP transport when started with --http or MCP_HTTP=1. In that mode, the /mcp endpoint accepts requests without any HTTP authentication layer. A remote client can initialize a session and call tools directly. This issue has been patched in version 0.9.27. |
| An incorrect visibility condition in the MISP event template builder allowed authenticated non-site-admin users to view galaxies that should not have been visible to their organisation. The custom access-control condition intended to restrict galaxies to those owned by the user’s organisation or distributed beyond it used a PHP comparison expression instead of a query condition. As a result, enabled galaxies, including organisation-only custom galaxies belonging to other organisations, could be exposed in the template builder galaxy list. This could disclose metadata about private galaxy definitions to unauthorised users. |
| ApostropheCMS is an open-source Node.js content management system. Versions up to and including 1.4.2 of the `@apostrophecms/seo` package injects the Google Analytics Tracking ID (`seoGoogleTrackingId`) and Google Tag Manager ID (`seoGoogleTagManager`) directly into `<script>` tag bodies using JavaScript template literals without any sanitization or validation. Any user with editor-level access (the default role for content managers) can set these fields to a malicious value, resulting in stored XSS that executes on every page for every visitor of the site. As of time of publication, no known patched versions are available. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 2.0.0 to before version 2.0.14, private services (`EnableShowInService: false`) are enumerable via per-server endpoints, leaking name and timing data. This issue has been patched in version 2.0.14. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 1.4.0 to before version 2.0.8, a RoleMember can fire other users' cron tasks via AlertRule.FailTriggerTasks (no ownership check). This issue has been patched in version 2.0.8. |
| OpenClaw before 2026.5.7 contains a hostname validation vulnerability in retry endpoint checks that allows matching hostname prefixes instead of exact hostnames. Attackers can exploit this by crafting a hostname prefix resembling a trusted host to send authentication material to untrusted endpoints. |
| A stored cross-site scripting vulnerability exists in MISP when the Overmind theme is used. The setHomePage endpoint previously saved the user-controlled path value through setSettingInternal(), bypassing the normal setSetting() validation logic, including validate_homepage, which requires homepage paths to start with /. As a result, an authenticated user could store an arbitrary homepage value, including an XSS payload.
The stored value was later rendered in app/View/News/index.ctp as the href attribute of the “Continue to homepage” link without HTML escaping. This could allow execution of attacker-controlled JavaScript in the browser context of the affected MISP instance when the crafted homepage link is rendered and interacted with.
The issue is fixed by always persisting the homepage setting through setSetting(), ensuring validation and access checks are applied, and by HTML-escaping the homepage value before rendering it in the news view. |
