| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Slider and Carousel slider by Depicter plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the uploadFile function in all versions up to, and including, 3.1.1. This makes it possible for authenticated attackers, with contributor access or higher, to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| AVideo versions 14.3.1 prior to 20.1 contain an unauthenticated remote code execution vulnerability caused by predictable generation of an installation salt using PHP uniqid(). The installation timestamp is exposed via a public endpoint, and a derived hash identifier is accessible through unauthenticated API responses, allowing attackers to brute-force the remaining entropy. The recovered salt can then be used to encrypt a malicious payload supplied to a notification API endpoint that evaluates attacker-controlled input, resulting in arbitrary code execution as the web server user. |
| Entrust Instant Financial Issuance (IFI) On Premise software (formerly referred to as CardWizard) versions 5.x, prior to 6.10.5, and prior to 6.11.1 contain an insecure .NET Remoting exposure in the Legacy Remoting Service that is enabled by default. The service registers a TCP remoting channel with SOAP and binary formatters configured at TypeFilterLevel=Full and exposes default ObjectURI endpoints such as logfile.rem, photo.rem, cwPhoto.rem, and reports.rem on a network-reachable remoting port. A remote, unauthenticated attacker who can reach the remoting port can invoke exposed remoting objects to read arbitrary files from the server and coerce outbound authentication, and may achieve arbitrary file write and remote code execution via known .NET Remoting exploitation techniques. This can lead to disclosure of sensitive installation and service-account data and compromise of the affected host. |
| Improper Validation of Specified Type of Input vulnerability in OpenText™ Content Management (Extended ECM) allows Parameter Injection.
A bad actor with the required OpenText Content Management privileges (not root) could expose
the vulnerability to carry out a remote code execution attack on the target system.
This issue affects Content Management (Extended ECM): from 10.0 through 24.4
with WebReports module
installed and enabled. |
| A vulnerability, that could result in Remote Code Execution (RCE), has been found in DocsGPT. Due to improper parsing of JSON data using eval() an unauthorized attacker could send arbitrary Python code to be executed via /api/remote endpoint..
This issue affects DocsGPT: from 0.8.1 through 0.12.0. |
| The SurveyJS: Drag & Drop WordPress Form Builder to create, style and embed multiple forms of any complexity plugin for WordPress is vulnerable to arbitrary file deletion due to a missing capability check on the callback function of the SurveyJS_DeleteFile class in all versions up to, and including, 1.12.17. This makes it possible for authenticated attackers, with Subscriber-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). This function is still vulnerable to Cross-Site Request Forgery as of 1.12.20. |
| The YayExtra – WooCommerce Extra Product Options plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the handle_upload_file function in all versions up to, and including, 1.3.7. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| The Honeywell Experion PKS and OneWireless WDM contains a Memory Buffer vulnerability in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to an Overread Buffers, which could result in improper index validation against buffer borders leading to remote code execution.
Honeywell recommends updating to the most recent version of Honeywell Experion PKS:
520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3.The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| The Honeywell Experion PKS
and OneWireless WDM
contains an Integer Underflow
vulnerability
in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to a Communication Channel Manipulation, which could result in a failure during subtraction allowing remote code execution.
Honeywell recommends updating to the most recent version of
Honeywell Experion PKS:520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3. The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| DeepDiff is a project focused on Deep Difference and search of any Python data. Versions 5.0.0 through 8.6.0 are vulnerable to class pollution via the Delta class constructor, and when combined with a gadget available in DeltaDiff, it can lead to Denial of Service and Remote Code Execution (via insecure Pickle deserialization) exploitation. The gadget available in DeepDiff allows `deepdiff.serialization.SAFE_TO_IMPORT` to be modified to allow dangerous classes such as posix.system, and then perform insecure Pickle deserialization via the Delta class. This potentially allows any Python code to be executed, given that the input to Delta is user-controlled. Depending on the application where DeepDiff is used, this can also lead to other vulnerabilities. This is fixed in version 8.6.1. |
| Crayfish is a collection of Islandora 8 microservices, one of which, Homarus, provides FFmpeg as a microservice. Prior to Crayfish version 4.1.0, remote code execution may be possible in web-accessible installations of Homarus in certain configurations. The issue has been patched in `islandora/crayfish:4.1.0`. Some workarounds are available. The exploit requires making a request against the Homarus's `/convert` endpoint; therefore, the ability to exploit is much reduced if the microservice is not directly accessible from the Internet, so: Prevent general access from the Internet from hitting Homarus. Alternatively or additionally, configure auth in Crayfish to be more strongly required, such that requests with `Authorization` headers that do not validate are rejected before the problematic CLI interpolation occurs. |
| The JS Help Desk – The Ultimate Help Desk & Support Plugin plugin for WordPress is vulnerable to PHP Code Injection leading to Remote Code Execution in all versions up to, and including, 2.8.6 via the 'storeTheme' function. This is due to a lack of sanitization on user-supplied values, which replace values in the style.php file, along with missing capability checks. This makes it possible for unauthenticated attackers to execute code on the server. This issue was partially patched in 2.8.6 when the code injection issue was resolved, and fully patched in 2.8.7 when the missing authorization and cross-site request forgery protection was added. CVE-2024-43274 is likely a duplicate of this issue. |
| GeoVision GV-ASWeb with the version 6.1.2.0 or less (fixed in 6.2.0), contains a Remote Code Execution (RCE) vulnerability within its Notification Settings feature. An authenticated attacker with "System Settings" privileges in ASWeb can exploit this flaw to execute arbitrary commands on the server, leading to a full system compromise. |
| Heap based buffer flow in zlog v1.1.0 to v1.2.17 in zlog_rule_new().The size of record_name is MAXLEN_PATH(1024) + 1 but file_path may have data upto MAXLEN_CFG_LINE(MAXLEN_PATH*4) + 1. So a check was missing in zlog_rule_new() while copying the record_name from file_path + 1 which caused the buffer overflow. An attacker can exploit this vulnerability to overwrite the zlog_record_fn record_func function pointer to get arbitrary code execution or potentially cause remote code execution (RCE). |
| veraPDF is an open source PDF/A validation library. Executing policy checks using custom schematron files via the CLI invokes an XSL transformation that may theoretically lead to a remote code execution (RCE) vulnerability. This doesn't affect the standard validation and policy checks functionality, veraPDF's common use cases. Most veraPDF users don't insert any custom XSLT code into policy profiles, which are based on Schematron syntax rather than direct XSL transforms. For users who do, only load custom policy files from sources you trust. This issue has not yet been patched. Users are advised to be cautious of XSLT code until a patch is available. |
| It is possible to crash or redirect the execution flow of the ClickHouse server process from an unauthenticated vector by sending a specially crafted request to the ClickHouse server native interface. This redirection is limited to what is available within a 256-byte range of memory at the time of execution, and no known remote code execution (RCE) code has been produced or exploited.
Fixes have been merged to all currently supported version of ClickHouse. If you are maintaining your own forked version of ClickHouse or using an older version and cannot upgrade, the fix for this vulnerability can be found in this commit https://github.com/ClickHouse/ClickHouse/pull/64024 . |
| mediDOK before 2.5.18.43 allows remote attackers to achieve remote code execution on a target system via deserialization of untrusted data. |
| The Redux Framework plugin for WordPress is vulnerable to unauthenticated JSON file uploads due to missing authorization and capability checks on the Redux_Color_Scheme_Import function in versions 4.4.12 to 4.4.17. This makes it possible for unauthenticated attackers to upload JSON files, which can be used to conduct stored cross-site scripting attacks and, in some rare cases, when the wp_filesystem fails to initialize - to Remote Code Execution. |
| Happy DOM is a JavaScript implementation of a web browser without its graphical user interface. Happy DOM v19 and lower contains a security vulnerability that puts the owner system at the risk of RCE (Remote Code Execution) attacks. A Node.js VM Context is not an isolated environment, and if the user runs untrusted JavaScript code within the Happy DOM VM Context, it may escape the VM and get access to process level functionality. It seems like what the attacker can get control over depends on if the process is using ESM or CommonJS. With CommonJS the attacker can get hold of the `require()` function to import modules. Happy DOM has JavaScript evaluation enabled by default. This may not be obvious to the consumer of Happy DOM and can potentially put the user at risk if untrusted code is executed within the environment. Version 20.0.0 patches the issue by changing JavaScript evaluation to be disabled by default. |
| PrivateBin is an online pastebin where the server has zero knowledge of pasted data. Starting in version 1.7.7 and prior to version 2.0.3, an unauthenticated Local File Inclusion exists in the template-switching feature. If `templateselection` is enabled in the configuration, the server trusts the `template` cookie and includes the referenced PHP file. An attacker can read sensitive data or, if they manage to drop a PHP file elsewhere, gain remote code execution. The constructed path of the template file is checked for existence, then included. For PrivateBin project files this does not leak any secrets due to data files being created with PHP code that prevents execution, but if a configuration file without that line got created or the visitor figures out the relative path to a PHP script that directly performs an action without appropriate privilege checking, those might execute or leak information. The issue has been patched in version 2.0.3. As a workaround, set `templateselection = false` (which is the default) in `cfg/conf.php` or remove it entirely |
