| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: kl5kusb105: fix bulk-out buffer overflow
klsi_105_prepare_write_buffer() is called by the generic write path
with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It
stores a two-byte length header at the start of the buffer and copies
the payload from the write fifo starting at buf + KLSI_HDR_LEN, but
passes the full buffer size as the number of bytes to copy:
count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN,
size, &port->lock);
When the fifo holds at least size bytes, size bytes are copied starting
two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its
end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for
the header as safe_serial already does.
Writing bulk_out_size or more bytes to the tty triggers a slab
out-of-bounds write, observed with KASAN by emulating the device with
dummy_hcd and raw-gadget:
BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0
Write of size 64 at addr ffff888112c62202 by task python3
kfifo_copy_out
klsi_105_prepare_write_buffer [kl5kusb105]
usb_serial_generic_write_start [usbserial]
Allocated by task 139:
usb_serial_probe [usbserial]
The buggy address is located 2 bytes inside of allocated 64-byte region
The out-of-bounds write no longer occurs with this change applied. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Forcibly close timer instances at closing
When snd_timer object is freed via snd_timer_free() and still pending
snd_timer_instance objects are assigned to the timer object, it tries
to unlink all instances and just set NULL to each ti->timer, then
releases the resources immediately. The problem is, however, when
there are slave timer instances that are associated with a master
instance linked to this timer: namely, those slave instances still
point to the freed timer object although the master instance is
unlinked, which may lead to user-after-free. The bug can be easily
triggered particularly when a new userspace-driven timers
(CONFIG_SND_UTIMER) is involved, since it can create and delete the
timer object via a simple file open/close, while the other
applications may keep accessing to that timer.
This patch is an attempt to paper over the problem above: now instead
of just unlinking, call snd_timer_close[_locked]() forcibly for each
pending timer instance, so that all assigned slave timer instances are
properly detached, too. Since snd_timer_close() might be called later
by the driver that created that instance, the check of
SNDRV_TIMER_IFLG_DEAD is added at the beginning, too. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Fix UAF at snd_timer_user_params()
At releasing a timer object, e.g. when a userspace timer
(CONFIG_SND_UTIMER) gets closed and snd_timer_free() is called, it
tries to detach the timer instances and release the resources.
However, it's still possible that other in-flight tasks are holding
the timer instance where the to-be-deleted timer object is associated,
and this may lead to racy accesses.
Fortunately, most of ioctls dealing with the timer instance list
already have the protection with register_mutex, and this also avoids
such races. But, SNDRV_TIMER_IOCTL_PARAMS isn't protected, hence the
concurrent ioctl may lead to use-after-free.
This patch just adds the guard with register_mutex to protect
snd_timer_user_params() for covering the code path as a quick
workaround. It's no hot-path but rather a rarely issued ioctl, so the
performance penalty doesn't matter. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: inherit IORING_CQE_F_BUF_MORE across bundle recv retries
When a bundle recv retries inside io_recv_finish(), the merge logic OR
the saved cflags from the previous iteration with the cflags returned by
the new iteration:
cflags = req->cqe.flags | (cflags & CQE_F_MASK);
Bits listed in CQE_F_MASK are inherited from the new iteration, and all
other bits (notably IORING_CQE_F_BUFFER and the buffer ID) come from the
saved cflags. Before this change CQE_F_MASK covered only
IORING_CQE_F_SOCK_NONEMPTY and IORING_CQE_F_MORE.
When using provided buffer rings (IOU_PBUF_RING_INC) with incremental
mode, and bundle recv, io_kbuf_inc_commit() can leave the head ring
entry partially consumed, __io_put_kbufs() then sets
IORING_CQE_F_BUF_MORE on the returned cflags so userspace knows the
buffer ID will be reused for subsequent completions.
Because IORING_CQE_F_BUF_MORE was not in CQE_F_MASK, the merge above
silently dropped it whenever the final retry iteration partially
consumed the buffer, and the subsequent req->cqe.flags = cflags &
~CQE_F_MASK save would have left a stale IORING_CQE_F_BUF_MORE in the
carried-over cflags had one been present. Userspace would then
wrongfully advance it ring head past an entry the kernel still uses.
Add IORING_CQE_F_BUF_MORE to CQE_F_MASK so it is both inherited from the
new iteration into the user-visible CQE and stripped from the saved
cflags between iterations. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: update file PMD counter before folio_put()
__split_huge_pmd_locked() updates the file/shmem RSS counter after
dropping the PMD mapping's folio reference. If folio_put() drops the last
reference, mm_counter_file() can later read freed folio state via
folio_test_swapbacked().
Move the counter update before folio_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Validate the passed in fops for ib_get_ucaps()
Sashiko pointed out it is not safe to rely only on the devt because
char/block alias so if the user finds a block device with the same dev_t
it can masquerade as a ucap cdev fd.
Test the f_ops to only accept authentic cdevs. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc
The cpu_id attribute supplied by user space through
UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu()
without first verifying that the value is within the valid CPU range.
Passing such untrusted data to cpumask_test_cpu() may lead to an
out-of-bounds read of the underlying cpumask bitmap: the helper expands
to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with
no bound check.
In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips
the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this
turns a bad user input into a machine reboot.
Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL
before it is used.
Reported by Smatch. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srp: bound SRP_RSP sense copy by the received length
srp_process_rsp() copies sense data from rsp->data + resp_data_len,
where resp_data_len is the full 32-bit value supplied by the SRP target
and is never checked against the number of bytes actually received
(wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so
at most 96 bytes are copied, but the source offset is not bounded.
A malicious or compromised SRP target on the InfiniBand/RoCE fabric that
the initiator has logged into can return an SRP_RSP with
SRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive buffer
is allocated at the target-chosen max_ti_iu_len, so the source of the
sense copy lands past the bytes actually received; with resp_data_len
near 0xFFFFFFFF it is gigabytes past the buffer and the read faults.
Copy the sense data only if it has not been truncated, that is, only if
the response header, the response data, and the sense region fit within
the bytes actually received; otherwise drop the sense and log. The
in-tree iSER and NVMe-RDMA receive paths already bound their parse by
wc->byte_len; this brings ib_srp into line with them. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix use-after-free in zram_bvec_write_partial()
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: clear skb->dev before running a sockmap verdict
On the UDP receive path skb->dev is repurposed as dev_scratch (the
truesize/state cache set by udp_set_dev_scratch()), through the
union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.
When a UDP socket is in a sockmap, sk_data_ready is
sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()
(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.
If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,
bpf_skc_lookup_tcp), bpf_skc_lookup() does:
if (skb->dev)
caller_net = dev_net(skb->dev);
skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()
dereferences it as a struct net_device * and the kernel takes a general
protection fault on a non-canonical address in softirq:
Oops: general protection fault, probably for non-canonical address 0x1010000800004a0
CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full)
RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline]
RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047
Call Trace:
<IRQ>
bpf_prog_4675cb904b7071f8+0x12e/0x14e
bpf_prog_run_pin_on_cpu+0xc6/0x1f0
sk_psock_verdict_recv+0x1ba/0x350
udp_read_skb+0x31a/0x370
sk_psock_verdict_data_ready+0x2e3/0x600
__udp_enqueue_schedule_skb+0x4c8/0x650
udpv6_queue_rcv_one_skb+0x3ec/0x740
udp6_unicast_rcv_skb+0x11d/0x140
ip6_protocol_deliver_rcu+0x61e/0x950
ip6_input_finish+0xa9/0x150
NF_HOOK+0x286/0x2f0
ip6_input+0x117/0x220
NF_HOOK+0x286/0x2f0
__netif_receive_skb+0x85/0x200
process_backlog+0x374/0x9a0
__napi_poll+0x4f/0x1c0
net_rx_action+0x3b0/0x770
handle_softirqs+0x15a/0x460
do_softirq+0x57/0x80
</IRQ>
The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on
dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear
skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which
skb_set_owner_sk_safe() set just above. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: allow subflow rcv wnd to shrink
In MPTCP connection, the `window` field in the TCP header refers to the
MPTCP-level rcv_nxt and it's right edge should not move backward. Such
constraint is enforced at DSS option generation time.
At the same time, the TCP stack ensures independently that the TCP-level
rcv wnd right's edge does not move backward. That in turn causes artificial
inflating of the MPTCP rcv window when the incoming data is acked at the
TCP level and is OoO in the MPTCP sequence space (or lands in the backlog).
As a consequence, the incoming traffic can exceed the receiver rcvbuf size
even when the sender is not misbehaving.
Prevent such scenario forcibly allowing the TCP subflow to shrink the
TCP-level rcv wnd regardless of the current netns setting. |
| In the Linux kernel, the following vulnerability has been resolved:
timers/migration: Fix livelock in tmigr_handle_remote_up()
tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu ==
smp_processor_id(), assuming the local softirq path already handled this
CPU's timers.
This assumption is wrong because jiffies can advance after the handling of
the CPU's global timers in run_timer_base(BASE_GLOBAL) and before
tmigr_handle_remote() evaluates the expiry times.
As a consequence a timer which expires after the CPU local timer wheel
advanced and becomes expired in the remote handling is ignored and the
callback is never invoked and removed from the timer wheel.
What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it
as expired, and the event is re-queued with expires == now on each
iteration. The goto-again loop spins indefinitely.
Fix this by calling timer_expire_remote() unconditionally. That's minimal
overhead for the common case as __run_timer_base() returns immediately if
there is nothing to expire in the local wheel.
[ tglx: Amend change log and add a comment ] |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction
Add guards to ensure ie_length is large enough before subtracting
fixed IE offsets to prevent unsigned integer underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN
In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done()
computes the login request payload length as wc->byte_len minus
ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int.
A remote iSER initiator can post a login Send work request carrying
fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows
and login_req_len becomes negative.
isert_rx_login_req() then reads that negative length back into a signed
int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the
min() is signed it keeps the negative value; the value is then passed as
the memcpy() length and sign-extended to a multi-gigabyte size_t. The
copy into the 8192-byte login->req_buf runs far out of bounds and
faults, crashing the target node. The login phase precedes iSCSI
authentication, so no credentials are required to reach this path.
Reject any login PDU shorter than ISER_HEADERS_LEN before the
subtraction, mirroring the existing early return on a failed work
completion, so login_req_len can never go negative. The upper bound was
already safe: a posted login buffer cannot deliver more than
ISER_RX_PAYLOAD_SIZE, so the difference stays at or below
MAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missing
lower bound needs to be added. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: keep err zero after successful ovl_cache_get()
ovl_iterate_merged() stores PTR_ERR(cache) in err before checking
IS_ERR(cache). On success err holds the truncated cache pointer and
can be returned as a bogus non-zero error.
The syzbot reproducer reaches this through overlay-on-overlay readdir:
getdents64
iterate_dir(outer overlay file)
ovl_iterate_merged()
ovl_cache_get()
ovl_dir_read_merged()
ovl_dir_read()
iterate_dir(inner overlay file)
ovl_iterate_merged()
Only compute PTR_ERR(cache) on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate()
The command stream parsing loop increments the index variable a second
time when a 64-bit command word is encountered (bit 14 set), but does
not re-check the loop bound before writing the second word:
for (i = 0; i < size / 4; i++) {
bocmds[i] = cmds[0];
if (cmd & 0x4000) {
i++;
bocmds[i] = cmds[1]; /* unchecked */
}
}
The buffer bocmds is backed by a DMA allocation of exactly size bytes
from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1].
When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is
set, bocmds[size/4-1] is written in bounds, i is then incremented to
size/4, and bocmds[size/4] writes four bytes past the end of the
allocation.
Userspace controls both the buffer contents and the size argument via
the ioctl, making this a userspace-triggerable heap out-of-bounds write.
Fix by checking the incremented index against the buffer bound before
the second write and returning -EINVAL if the buffer is too small to
contain the extended command. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix IFM region index out-of-bounds in command stream parser
NPU_SET_IFM_REGION extracts the region index with param & 0x7f, giving
a maximum value of 127. However region_size[] and output_region[] in
struct ethosu_validated_cmdstream_info are both sized to
NPU_BASEP_REGION_MAX (8), giving valid indices [0..7].
Every other region assignment in the same switch uses param & 0x7:
NPU_SET_OFM_REGION: st.ofm.region = param & 0x7;
NPU_SET_IFM2_REGION: st.ifm2.region = param & 0x7;
NPU_SET_WEIGHT_REGION: st.weight[0].region = param & 0x7;
NPU_SET_SCALE_REGION: st.scale[0].region = param & 0x7;
The 0x7f mask on IFM is inconsistent and appears to be a typo.
feat_matrix_length() and calc_sizes() use the region index directly
as an array subscript into the kzalloc'd info struct:
info->region_size[fm->region] = max(...);
A userspace caller supplying NPU_SET_IFM_REGION with param > 7 causes
a write up to 127*8 = 1016 bytes past the start of region_size[],
corrupting adjacent kernel heap data.
Fix by applying the same & 0x7 mask used by all other region
assignments. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix arithmetic issues in dma_length()
dma_length() derives DMA region usage from command stream values and
updates region_size[]:
len = ((len + stride[0]) * size0 + stride[1]) * size1
region_size[region] = max(..., len + dma->offset)
Several arithmetic issues can corrupt the derived region size:
- signed stride values may underflow when added to len
- intermediate multiplications may overflow
- len + dma->offset may overflow during region_size updates
- dma_length() error returns were not validated by the caller
region_size[] is later used by ethosu_job.c to validate command stream
accesses against GEM buffer sizes. Arithmetic wraparound can therefore
under-report region usage and bypass the bounds validation.
Fix by validating signed additions, using overflow helpers for
multiplications and offset updates, and propagating dma_length()
failures to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: reject DMA commands with uninitialized length
cmd_state_init() initializes the command state with memset(0xff),
leaving dma->len at U64_MAX to signal missing setup. The only setter
is NPU_SET_DMA0_LEN; if userspace omits this command and issues
NPU_OP_DMA_START, dma->len remains U64_MAX.
In dma_length(), a positive stride added to U64_MAX wraps to a small
value. With size0 == 1, check_mul_overflow() does not trigger and
dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check
then passes, region_size[] stays 0, and the bounds check in
ethosu_job.c is bypassed, allowing hardware to execute DMA with stale
physical addresses.
Fix by checking for U64_MAX at the start of dma_length() before any
arithmetic, consistent with the sentinel value used throughout the
driver to detect uninitialized fields. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: avoid potential null folio->mapping deref during error reporting
When a buffered read fails, iomap_finish_folio_read() reports the error
with fserror_report_io(folio->mapping->host, ...). This is called after
ifs->read_bytes_pending has been decremented by the bytes attempted to
be read.
For a folio split across multiple read completions, the folio is only
guaranteed to stay locked while read_bytes_pending > 0. Once
iomap_finish_folio_read() decrements read_bytes_pending, another
in-flight read can complete and end the read on the folio, which unlocks
it. This allows truncate logic to run and detach the folio (set
folio->mapping to NULL). The error reporting path then can dereference a
NULL folio->mapping. As reported by Sam Sun, this is the race that can
occur:
CPU0: failed completion CPU1: final completion CPU2: truncate
----------------------- ---------------------- --------------
read_bytes_pending -= len
finished = false
/* preempted before
fserror_report_io() */
read_bytes_pending -= len
finished = true
folio_end_read()
truncate clears
folio->mapping
fserror_report_io(
folio->mapping->host, ...)
^ NULL deref
Fix this by reporting the error first before decrementing
ifs->read_bytes_pending. |
