| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Brizy WordPress plugin before 2.8.19 does not properly restrict who can modify its site-global design data and does not sanitise part of that data before outputting it, allowing authenticated users with Author-level access and above to store arbitrary JavaScript that is then served unsanitised on the site's front-end pages and executes in the browser of every visitor, including administrators. |
| The Brizy WordPress plugin before 2.8.19 does not sanitize or escape featured-image focal-point coordinates submitted through one of its AJAX actions before storing them and later echoing them into HTML attributes in the post editor's Featured Image meta box, allowing users with the Contributor role or above to inject arbitrary web scripts that execute in the session of a higher-privileged user who opens the post for review. |
| The background service of ABP or AES runs as NT AUTHORITY\SYSTEM and implements a file-based inter-process communication (IPC) mechanism protected by AES encryption. Because the encryption key file is readable by standard users and protected using DPAPI. Any authenticated local user can recover the key and forge valid IPC requests. Furthermore, the service does not check the identity of the requesting process and validates destination paths using an insufficient substring check. A local attacker can submit crafted encrypted requests containing directory traversal sequences to perform arbitrary file reads and arbitrary file writes as NT AUTHORITY\SYSTEM, leading to full local privilege escalation.
Affected products and versions include: ABP (ASUSTOR Backup Plan) 2.0.7.10171 and earlier as well as AES (ASUSTOR EZSync) 1.1.1.3113 and earlier. |
| An issue in OPSWAT AppRemover Driver (ardrv.sys) v2017.10.02.1551 and earlier in IOCTL handler 0x2420031. Any local user can open the device and send process termination requests without privilege validation. |
| An issue in Kerlink Kerlink Wirnet iStation 868 KerOS v.4.3.3_20200803132042 allows a remote attacker to obtain sensitive information via a boardID and revisionID components |
| A potential missing authentication vulnerability could allow a local privileged attacker to use WMI commands to arbitrarily trigger a System Management Interrupt handler. |
| Improper Access Control vulnerability in the Removable Media Validation function of TXOne Networks products allows a local attacker with administrator privileges to bypass the file lockdown mechanism, resulting in unauthorized file transfer to the victim device. The attacker needs to deploy unauthorized file on the removable media in advance. This issue affects SafePortAgent: before 3.2.5024; StellarProtect: from 3.2.4011 before 5.0.1083. |
| HCL Aftermarket EPC is vulnerable to brute force attacks since application doesn’t have captcha implemented. It can lead to various security issues like brute force , automated attacks & account enumeration |
| A DLL hijacking vulnerability in GeoVision GV-ASManager allows a local attacker with write access to an unsafe search directory to execute arbitrary code. By placing a crafted dynamic-link library (DLL) file into the application search path prior to the legitimate library, the malicious code is loaded and executed under the security privileges of the GV-ASManager process. |
| The
product firmware contains an embedded, static RSA private key utilized by the
Lighttpd web server for TLS termination. Exposure of this private key allows
malicious actors to breach the confidentiality and integrity of HTTPS
communications, enabling traffic decryption and server spoofing. |
| The
product firmware contains an embedded, static RSA private key utilized by the
Lighttpd web server for TLS termination. Exposure of this private key allows
malicious actors to breach the confidentiality and integrity of HTTPS
communications, enabling traffic decryption and server spoofing. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: xpad - fix out-of-bounds access for Share button
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length. |
| freo2 provided by refirio contains an unrestricted upload of file with dangerous type vulnerability. A user with the highest-level administrative privileges for the product may upload an executable file and execute arbitrary OS commands. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
The `ims_pcu_process_data()` processes incoming URB data byte by byte.
However, it fails to check if the `read_pos` index exceeds
IMS_PCU_BUF_SIZE.
If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE,
`read_pos` will increment indefinitely. Moreover, since `read_pos` is
located immediately after `read_buf`, the attacker can overwrite
`read_pos` itself to arbitrarily control the index.
This manipulated `read_pos` is subsequently used in
`ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a
heap buffer overflow.
Specifically, an attacker can overwrite the `cmd_done.wait.head` located
at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`.
Consequently, when the driver calls `complete(&pcu->cmd_done)`, it
triggers a control flow hijack by using the manipulated pointer.
Fix this by adding a bounds check for `read_pos` before writing to
`read_buf`. If the packet is too long, discard it, log a warning,
and reset the parser state.
[dtor: factor out resetting packet state, reset checksum as well] |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: don't free the ASCONF's own transport in DEL-IP processing
sctp_process_asconf() caches the transport the ASCONF chunk is processed
against in asconf->transport (== chunk->transport, set once in sctp_rcv()).
For an ASCONF located through its Address Parameter by
__sctp_rcv_asconf_lookup(), that cached transport corresponds to the
Address Parameter, which need not be the packet's source address.
sctp_process_asconf_param() rejects a DEL-IP for the packet source address
(ADDIP D8, SCTP_ERROR_DEL_SRC_IP), but nothing protects asconf->transport.
A single ASCONF can therefore carry, in order:
[Address Parameter L] [DEL-IP L] [DEL-IP 0.0.0.0]
where L differs from the source. The DEL-IP for L passes the D8 check and
calls sctp_assoc_rm_peer() on the transport that asconf->transport still
points at, freeing it (RCU-deferred). The following wildcard DEL-IP then
reuses the now-dangling asconf->transport in sctp_assoc_set_primary() and
sctp_assoc_del_nonprimary_peers(): set_primary() dereferences the freed
transport (->ipaddr, ->state) and plants the dangling pointer into
asoc->peer.primary_path / active_path, and del_nonprimary_peers(), keeping
only the pointer that is no longer on the list, removes every real
transport, leaving the association with a transport_count of 0 and
primary_path/active_path pointing at freed memory.
Reject a DEL-IP that targets the transport the ASCONF is being processed
against, mirroring the existing source-address guard, so the wildcard
branch can never reuse a freed transport. |
| In the Linux kernel, the following vulnerability has been resolved:
rhashtable: clear stale iter->p on table restart
rhashtable_walk_start_check() has two restart paths when resuming a walk.
When iter->walker.tbl is valid, it re-validates iter->p against the table
and sets iter->p = NULL if the object is gone. When iter->walker.tbl is
NULL (table was freed during resize), it resets slot and skip but forgets
to clear iter->p.
rhashtable_walk_next() then dereferences the stale iter->p, reading
freed memory. This is a use-after-free.
Any caller that does multi-fragment rhashtable walks across
walk_stop/walk_start boundaries is affected. Concrete cases include
netlink_diag (__netlink_diag_dump in net/netlink/diag.c) and TIPC
(tipc_nl_sk_walk in net/tipc/socket.c).
Crash stack (netlink_diag):
BUG: KASAN: slab-use-after-free in rhashtable_walk_next+0x365/0x3c0
Read of size 8 at addr ffff88801a9d2438 (freed kmalloc-2k, offset 1080)
Call Trace:
rhashtable_walk_next+0x365/0x3c0 (lib/rhashtable.c:1016)
__netlink_diag_dump+0x160/0x760 (net/netlink/diag.c:122)
netlink_diag_dump+0xc2/0x240
netlink_dump+0x5bc/0x1270
netlink_recvmsg+0x7a3/0x980
sock_recvmsg+0x1bc/0x200
__sys_recvfrom+0x1d4/0x2c0 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Hide shadow VMCS right after VMCLEAR
free_nested() frees the shadow VMCS while vmcs01 still points to it. But
because it is asynchronous with respect to loaded_vmcs_clear(), the vCPU
might migrate before the pointer is cleared and __loaded_vmcs_clear()
may then execute VMCLEAR.
The VMCS needs to stay attached until its explicit VMCLEAR completes, but
then it can be hidden and the page safely freed. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Check for invalid/obsolete root *after* making MMU pages available
Check for a "stale" page fault, i.e. for an invalid and/or obsolete root,
after making MMU pages available for the shadow MMU. If reclaiming shadow
pages zaps an in-use root, i.e. marks it invalid, then KVM will attempt to
map memory into an invalid root. On its own, populating an invalid root is
"fine", but because child shadow pages inherit their parent's role, any
children created during the map/fetch will be created as invalid pages,
thus violating KVM's invariant that invalid pages are never on the list of
active MMU pages.
Note, the underlying flaw has existed since KVM first started tracking
invalid roots in 2008 (commit 2e53d63acba7, "KVM: MMU: ignore zapped root
pagetables"), but the true badness only came along in 2020 (Linux 5.9)
with the invariant that invalid shadow pages can't be on the list of
active pages.
Note #2, inheriting role.invalid when creating child shadow pages is also
far from ideal; that flaw will be addressed separately. |
| The All-in-One WP Migration and Backup WordPress plugin before 7.106 does not properly sanitise a user-supplied value before using it to build a file path, allowing unauthenticated attackers to create or append a log file in arbitrary locations outside its intended storage directory. |
| The Kirki WordPress plugin before 6.0.12 does not validate a user-supplied URL before requesting it server-side, allowing unauthenticated attackers to make the site issue HTTP requests to arbitrary hosts (Server-Side Request Forgery). |
