| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: loongson - Remove broken and unused loongson-rng
The loongson-rng rng_alg has several vulnerabilities, including not
providing forward security, and a use-after-free bug due to the use of
wait_for_completion_interruptible().
Meanwhile, the rng_alg framework doesn't really have any purpose in the
first place other than to access the software algorithms crypto/drbg.c
and crypto/jitterentropy.c. Hardware-specific rng_algs have no
in-kernel user, and unlike hwrng there's no feed into the actual Linux
RNG. As such, there's really no point to this code. There are of
course other rng_alg drivers that are similarly unused, but they're
similarly in the process of being phased out, e.g.
https://lore.kernel.org/r/[email protected] and
https://lore.kernel.org/r/[email protected]
Given that, there's no point in fixing forward these vulnerabilities,
and it makes much more sense to simply roll back the addition of this
driver. If this platform provides TRNG (not PRNG) functionality, it
could make sense to add a hwrng driver, but it would be quite different. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: ulpi: fix memory leak on registration failure
The allocated device name is never freed on early ULPI device
registration failures.
Fix this by initialising the device structure earlier and releasing the
initial reference whenever registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: mtu3: unmap request DMA on queue failure
mtu3_gadget_queue() maps the request before checking whether
the QMU GPD ring can accept another transfer. the request is
returned with -EAGAIN before it is linked on the endpoint
request list if mtu3_prepare_transfer() fails.
Normal completion and dequeue paths unmap requests from
mtu3_req_complete(), but this error path never reaches that
helper, so the DMA mapping is left active. Unmap the request
before returning from the failed queue path. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: legousbtower: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject fragmented frames in devmap
Devmap broadcast redirects clone the packet for all but the last
destination.
For native XDP, that clone path copies only the linear xdp_frame data,
while fragmented frames keep skb_shared_info in tailroom outside the
linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but
without valid frag metadata, and the later free path can interpret
uninitialized tail data as skb_shared_info, leading to an out-of-bounds
access during frame return.
Reject fragmented native XDP frames in dev_map_enqueue_clone().
Add the same restriction to the generic XDP clone path in
dev_map_redirect_clone(). Generic XDP represents fragmented packets as
nonlinear skbs, and rejecting them here keeps clone-based broadcast
support aligned between native and generic XDP. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length
check_and_correct_requested_length() compares (off + len) against
node_size using u32 arithmetic. When the caller passes a large len
value (e.g. from an underflowed subtraction in hfs_brec_remove()),
off + len can wrap past 2^32 and produce a small result, causing the
bounds check to pass when it should fail.
For example, with off=14 and len=0xFFFFFFF2 (underflowed from
data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6,
which is less than a typical node_size of 512, so the check passes and
the subsequent memmove reads ~4GB past the node buffer.
Fix this by widening the addition to u64 before comparing against
node_size. This prevents the u32 wrap while keeping the logic
straightforward. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: fix out-of-bounds bit access on mt_io_flags
mt_io_flags is a single unsigned long, but mt_process_slot(),
mt_release_pending_palms() and mt_release_contacts() use it as a
per-slot bitmap indexed by the slot number. That slot number is only
bounded by td->maxcontacts, which is taken from the device's
ContactCountMaximum feature report and can be up to 255, not by
BITS_PER_LONG.
As a result, a multitouch device that advertises a large contact count
makes set_bit()/clear_bit() operate past the mt_io_flags word and
corrupt the adjacent members of struct mt_device. The sticky-fingers
release timer is the easiest way to reach this. mt_release_contacts()
runs
for (i = 0; i < mt->num_slots; i++)
clear_bit(i, &td->mt_io_flags);
with num_slots == maxcontacts. For maxcontacts around 250 the loop
clears the bits that overlap td->applications.next, zeroing that list
head, and the list_for_each_entry() that immediately follows then
dereferences NULL. The kernel panics from timer (softirq) context. On a
KASAN build this shows up as a general protection fault in
mt_release_contacts() with a null-ptr-deref at offset 0x58, which is
offsetof(struct mt_application, num_received).
The state is reachable from an untrusted USB or Bluetooth HID
multitouch device; no local privileges are required.
Store the per-slot active state in a separately allocated bitmap sized
for maxcontacts, the same pattern already used for pending_palm_slots,
and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two
"mt_io_flags & MT_IO_SLOTS_MASK" arming checks become
bitmap_empty(td->active_slots, td->maxcontacts).
Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the
same commit to leave the low byte for the slot bits; with the slot bits
gone it fits in bit 0 again, which also keeps it within the unsigned
long on 32-bit. |
| A parsing issue in the handling of directory paths was addressed with improved path validation. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6. A malicious app may be able to break out of its sandbox. |
| In schreibfaul1 ESP32-audioI2S 3.4.5, a heap-based buffer overflow vulnerability exists in the ID3 tag parsing function showID3Tag() of the embedded audio streaming library. The program reads untrusted long ID3 tag value from malicious audio files and uses unbounded appendf() to write formatted strings into ps_ptr heap buffer without length validation. Successful exploitation allows attackers to execute arbitrary code, leak sensitive memory data, cause device crash, or escalate privileges via a crafted malicious audio file. |
| The issue was addressed with improved memory handling. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to cause unexpected system termination or read kernel memory. |
| The SMS Alert – SMS & OTP for WooCommerce, Order Notifications & Abandoned Cart Recovery plugin for WordPress is vulnerable to time-based SQL Injection via the 'orderby' parameter in all versions up to, and including, 3.9.7 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The TrueBooker – Appointment Booking and Scheduler System plugin for WordPress is vulnerable to generic SQL Injection via the 'alldata[truebooker_user]' parameter in all versions up to, and including, 1.2.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The check_ajax_referer() nonce guard does not constitute an authentication or authorization barrier because the nonce is exposed to unauthenticated visitors on TrueBooker front-end booking pages; exploitation additionally requires that the required booking fields (category, service, person, date, and time slot) be present in the alldata POST parameter so that execution reaches the vulnerable SQL query branch. |
| wakaru is a JavaScript decompiler and unminifier toolkit. From 1.0.0 until 1.4.0, @wakaru/cli sanitizes bundle-controlled module filenames only once before writing extracted modules, so a crafted filename containing overlapping traversal sequences such as ....// collapses to ../ after sanitization and lets the final output path escape the selected output directory, allowing an attacker who can cause a user to run wakaru --unpack on a malicious bundle to write files outside that directory and, depending on the target path and environment, potentially achieve code execution. This issue is fixed in @wakaru/cli 1.4.0. |
| ELECOM wireless LAN routers and access points devices contain a reflected cross-site scripting vulnerability in WebUI. If this vulnerability is exploited, an arbitrary script may be executed on a logged-in user's web browser. |
| ELECOM wireless LAN routers and access points devices contain an OS Command Injection vulnerability in WebUI. If this vulnerability is exploited, an arbitrary OS command may be executed by an attacker who can log in to the product. |
| ELECOM wireless LAN routers and access points devices contain an OS Command Injection vulnerability in Restore Settings. If this vulnerability is exploited, an arbitrary OS command may be executed by an attacker who can log in to the product. |
| This issue was addressed through improved state management. This issue is fixed in iOS 26.6 and iPadOS 26.6. An attacker with physical access may be able to access sensitive user data during iPhone Mirroring. |
| Improper exposure of the MCP server in alibabacloud-rds-openapi-mcp-server allows remote attackers to invoke exposed MCP tools via network access to an MCP endpoint listening on all network interfaces by default. |
| Unauthenticated Cross Site Scripting (XSS) in Anti Spam and list cleaner – AcyChecker <= 1.8.1 versions. |
| Unauthenticated Cross Site Scripting (XSS) in GiveWP <= 4.16.3 versions. |
