| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
maple_tree: correct tree corruption on spanning store
Patch series "maple_tree: correct tree corruption on spanning store", v3.
There has been a nasty yet subtle maple tree corruption bug that appears
to have been in existence since the inception of the algorithm.
This bug seems far more likely to happen since commit f8d112a4e657
("mm/mmap: avoid zeroing vma tree in mmap_region()"), which is the point
at which reports started to be submitted concerning this bug.
We were made definitely aware of the bug thanks to the kind efforts of
Bert Karwatzki who helped enormously in my being able to track this down
and identify the cause of it.
The bug arises when an attempt is made to perform a spanning store across
two leaf nodes, where the right leaf node is the rightmost child of the
shared parent, AND the store completely consumes the right-mode node.
This results in mas_wr_spanning_store() mitakenly duplicating the new and
existing entries at the maximum pivot within the range, and thus maple
tree corruption.
The fix patch corrects this by detecting this scenario and disallowing the
mistaken duplicate copy.
The fix patch commit message goes into great detail as to how this occurs.
This series also includes a test which reliably reproduces the issue, and
asserts that the fix works correctly.
Bert has kindly tested the fix and confirmed it resolved his issues. Also
Mikhail Gavrilov kindly reported what appears to be precisely the same
bug, which this fix should also resolve.
This patch (of 2):
There has been a subtle bug present in the maple tree implementation from
its inception.
This arises from how stores are performed - when a store occurs, it will
overwrite overlapping ranges and adjust the tree as necessary to
accommodate this.
A range may always ultimately span two leaf nodes. In this instance we
walk the two leaf nodes, determine which elements are not overwritten to
the left and to the right of the start and end of the ranges respectively
and then rebalance the tree to contain these entries and the newly
inserted one.
This kind of store is dubbed a 'spanning store' and is implemented by
mas_wr_spanning_store().
In order to reach this stage, mas_store_gfp() invokes
mas_wr_preallocate(), mas_wr_store_type() and mas_wr_walk() in turn to
walk the tree and update the object (mas) to traverse to the location
where the write should be performed, determining its store type.
When a spanning store is required, this function returns false stopping at
the parent node which contains the target range, and mas_wr_store_type()
marks the mas->store_type as wr_spanning_store to denote this fact.
When we go to perform the store in mas_wr_spanning_store(), we first
determine the elements AFTER the END of the range we wish to store (that
is, to the right of the entry to be inserted) - we do this by walking to
the NEXT pivot in the tree (i.e. r_mas.last + 1), starting at the node we
have just determined contains the range over which we intend to write.
We then turn our attention to the entries to the left of the entry we are
inserting, whose state is represented by l_mas, and copy these into a 'big
node', which is a special node which contains enough slots to contain two
leaf node's worth of data.
We then copy the entry we wish to store immediately after this - the copy
and the insertion of the new entry is performed by mas_store_b_node().
After this we copy the elements to the right of the end of the range which
we are inserting, if we have not exceeded the length of the node (i.e.
r_mas.offset <= r_mas.end).
Herein lies the bug - under very specific circumstances, this logic can
break and corrupt the maple tree.
Consider the following tree:
Height
0 Root Node
/ \
pivot = 0xffff / \ pivot = ULONG_MAX
/
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
posix-clock: Fix missing timespec64 check in pc_clock_settime()
As Andrew pointed out, it will make sense that the PTP core
checked timespec64 struct's tv_sec and tv_nsec range before calling
ptp->info->settime64().
As the man manual of clock_settime() said, if tp.tv_sec is negative or
tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL,
which include dynamic clocks which handles PTP clock, and the condition is
consistent with timespec64_valid(). As Thomas suggested, timespec64_valid()
only check the timespec is valid, but not ensure that the time is
in a valid range, so check it ahead using timespec64_valid_strict()
in pc_clock_settime() and return -EINVAL if not valid.
There are some drivers that use tp->tv_sec and tp->tv_nsec directly to
write registers without validity checks and assume that the higher layer
has checked it, which is dangerous and will benefit from this, such as
hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(),
and some drivers can remove the checks of itself. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Switch to device-managed dmam_alloc_coherent()
Using the device-managed version allows to simplify clean-up in probe()
error path.
Additionally, this device-managed ensures proper cleanup, which helps to
resolve memory errors, page faults, btrfs going read-only, and btrfs
disk corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: dp83869: fix memory corruption when enabling fiber
When configuring the fiber port, the DP83869 PHY driver incorrectly
calls linkmode_set_bit() with a bit mask (1 << 10) rather than a bit
number (10). This corrupts some other memory location -- in case of
arm64 the priv pointer in the same structure.
Since the advertising flags are updated from supported at the end of the
function the incorrect line isn't needed at all and can be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Stop the active perfmon before being destroyed
Upon closing the file descriptor, the active performance monitor is not
stopped. Although all perfmons are destroyed in `vc4_perfmon_close_file()`,
the active performance monitor's pointer (`vc4->active_perfmon`) is still
retained.
If we open a new file descriptor and submit a few jobs with performance
monitors, the driver will attempt to stop the active performance monitor
using the stale pointer in `vc4->active_perfmon`. However, this pointer
is no longer valid because the previous process has already terminated,
and all performance monitors associated with it have been destroyed and
freed.
To fix this, when the active performance monitor belongs to a given
process, explicitly stop it before destroying and freeing it. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: handle consistently DSS corruption
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type. |
| In the Linux kernel, the following vulnerability has been resolved:
secretmem: disable memfd_secret() if arch cannot set direct map
Return -ENOSYS from memfd_secret() syscall if !can_set_direct_map(). This
is the case for example on some arm64 configurations, where marking 4k
PTEs in the direct map not present can only be done if the direct map is
set up at 4k granularity in the first place (as ARM's break-before-make
semantics do not easily allow breaking apart large/gigantic pages).
More precisely, on arm64 systems with !can_set_direct_map(),
set_direct_map_invalid_noflush() is a no-op, however it returns success
(0) instead of an error. This means that memfd_secret will seemingly
"work" (e.g. syscall succeeds, you can mmap the fd and fault in pages),
but it does not actually achieve its goal of removing its memory from the
direct map.
Note that with this patch, memfd_secret() will start erroring on systems
where can_set_direct_map() returns false (arm64 with
CONFIG_RODATA_FULL_DEFAULT_ENABLED=n, CONFIG_DEBUG_PAGEALLOC=n and
CONFIG_KFENCE=n), but that still seems better than the current silent
failure. Since CONFIG_RODATA_FULL_DEFAULT_ENABLED defaults to 'y', most
arm64 systems actually have a working memfd_secret() and aren't be
affected.
From going through the iterations of the original memfd_secret patch
series, it seems that disabling the syscall in these scenarios was the
intended behavior [1] (preferred over having
set_direct_map_invalid_noflush return an error as that would result in
SIGBUSes at page-fault time), however the check for it got dropped between
v16 [2] and v17 [3], when secretmem moved away from CMA allocations.
[1]: https://lore.kernel.org/lkml/[email protected]/
[2]: https://lore.kernel.org/lkml/[email protected]/#t
[3]: https://lore.kernel.org/lkml/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
media: qcom: camss: Remove use_count guard in stop_streaming
The use_count check was introduced so that multiple concurrent Raw Data
Interfaces RDIs could be driven by different virtual channels VCs on the
CSIPHY input driving the video pipeline.
This is an invalid use of use_count though as use_count pertains to the
number of times a video entity has been opened by user-space not the number
of active streams.
If use_count and stream-on count don't agree then stop_streaming() will
break as is currently the case and has become apparent when using CAMSS
with libcamera's released softisp 0.3.
The use of use_count like this is a bit hacky and right now breaks regular
usage of CAMSS for a single stream case. Stopping qcam results in the splat
below, and then it cannot be started again and any attempts to do so fails
with -EBUSY.
[ 1265.509831] WARNING: CPU: 5 PID: 919 at drivers/media/common/videobuf2/videobuf2-core.c:2183 __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
...
[ 1265.510630] Call trace:
[ 1265.510636] __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common]
[ 1265.510648] vb2_core_streamoff+0x24/0xcc [videobuf2_common]
[ 1265.510660] vb2_ioctl_streamoff+0x5c/0xa8 [videobuf2_v4l2]
[ 1265.510673] v4l_streamoff+0x24/0x30 [videodev]
[ 1265.510707] __video_do_ioctl+0x190/0x3f4 [videodev]
[ 1265.510732] video_usercopy+0x304/0x8c4 [videodev]
[ 1265.510757] video_ioctl2+0x18/0x34 [videodev]
[ 1265.510782] v4l2_ioctl+0x40/0x60 [videodev]
...
[ 1265.510944] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 0 in active state
[ 1265.511175] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 1 in active state
[ 1265.511398] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 2 in active st
One CAMSS specific way to handle multiple VCs on the same RDI might be:
- Reference count each pipeline enable for CSIPHY, CSID, VFE and RDIx.
- The video buffers are already associated with msm_vfeN_rdiX so
release video buffers when told to do so by stop_streaming.
- Only release the power-domains for the CSIPHY, CSID and VFE when
their internal refcounts drop.
Either way refusing to release video buffers based on use_count is
erroneous and should be reverted. The silicon enabling code for selecting
VCs is perfectly fine. Its a "known missing feature" that concurrent VCs
won't work with CAMSS right now.
Initial testing with this code didn't show an error but, SoftISP and "real"
usage with Google Hangouts breaks the upstream code pretty quickly, we need
to do a partial revert and take another pass at VCs.
This commit partially reverts commit 89013969e232 ("media: camss: sm8250:
Pipeline starting and stopping for multiple virtual channels") |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix race when converting group handle to group object
XArray provides it's own internal lock which protects the internal array
when entries are being simultaneously added and removed. However there
is still a race between retrieving the pointer from the XArray and
incrementing the reference count.
To avoid this race simply hold the internal XArray lock when
incrementing the reference count, this ensures there cannot be a racing
call to xa_erase(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix access to uninitialized variable in tick_ctx_cleanup()
The group variable can't be used to retrieve ptdev in our second loop,
because it points to the previously iterated list_head, not a valid
group. Get the ptdev object from the scheduler instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix potential memory leak in bcmasp_xmit()
The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb
in case of mapping fails, add dev_kfree_skb() to fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve param->string when parsing mount options
In bpf_parse_param(), keep the value of param->string intact so it can
be freed later. Otherwise, the kmalloc area pointed to by param->string
will be leaked as shown below:
unreferenced object 0xffff888118c46d20 (size 8):
comm "new_name", pid 12109, jiffies 4295580214
hex dump (first 8 bytes):
61 6e 79 00 38 c9 5c 7e any.8.\~
backtrace (crc e1b7f876):
[<00000000c6848ac7>] kmemleak_alloc+0x4b/0x80
[<00000000de9f7d00>] __kmalloc_node_track_caller_noprof+0x36e/0x4a0
[<000000003e29b886>] memdup_user+0x32/0xa0
[<0000000007248326>] strndup_user+0x46/0x60
[<0000000035b3dd29>] __x64_sys_fsconfig+0x368/0x3d0
[<0000000018657927>] x64_sys_call+0xff/0x9f0
[<00000000c0cabc95>] do_syscall_64+0x3b/0xc0
[<000000002f331597>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix overloading of MEM_UNINIT's meaning
Lonial reported an issue in the BPF verifier where check_mem_size_reg()
has the following code:
if (!tnum_is_const(reg->var_off))
/* For unprivileged variable accesses, disable raw
* mode so that the program is required to
* initialize all the memory that the helper could
* just partially fill up.
*/
meta = NULL;
This means that writes are not checked when the register containing the
size of the passed buffer has not a fixed size. Through this bug, a BPF
program can write to a map which is marked as read-only, for example,
.rodata global maps.
The problem is that MEM_UNINIT's initial meaning that "the passed buffer
to the BPF helper does not need to be initialized" which was added back
in commit 435faee1aae9 ("bpf, verifier: add ARG_PTR_TO_RAW_STACK type")
got overloaded over time with "the passed buffer is being written to".
The problem however is that checks such as the above which were added later
via 06c1c049721a ("bpf: allow helpers access to variable memory") set meta
to NULL in order force the user to always initialize the passed buffer to
the helper. Due to the current double meaning of MEM_UNINIT, this bypasses
verifier write checks to the memory (not boundary checks though) and only
assumes the latter memory is read instead.
Fix this by reverting MEM_UNINIT back to its original meaning, and having
MEM_WRITE as an annotation to BPF helpers in order to then trigger the
BPF verifier checks for writing to memory.
Some notes: check_arg_pair_ok() ensures that for ARG_CONST_SIZE{,_OR_ZERO}
we can access fn->arg_type[arg - 1] since it must contain a preceding
ARG_PTR_TO_MEM. For check_mem_reg() the meta argument can be removed
altogether since we do check both BPF_READ and BPF_WRITE. Same for the
equivalent check_kfunc_mem_size_reg(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: devmap: provide rxq after redirect
rxq contains a pointer to the device from where
the redirect happened. Currently, the BPF program
that was executed after a redirect via BPF_MAP_TYPE_DEVMAP*
does not have it set.
This is particularly bad since accessing ingress_ifindex, e.g.
SEC("xdp")
int prog(struct xdp_md *pkt)
{
return bpf_redirect_map(&dev_redirect_map, 0, 0);
}
SEC("xdp/devmap")
int prog_after_redirect(struct xdp_md *pkt)
{
bpf_printk("ifindex %i", pkt->ingress_ifindex);
return XDP_PASS;
}
depends on access to rxq, so a NULL pointer gets dereferenced:
<1>[ 574.475170] BUG: kernel NULL pointer dereference, address: 0000000000000000
<1>[ 574.475188] #PF: supervisor read access in kernel mode
<1>[ 574.475194] #PF: error_code(0x0000) - not-present page
<6>[ 574.475199] PGD 0 P4D 0
<4>[ 574.475207] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
<4>[ 574.475217] CPU: 4 UID: 0 PID: 217 Comm: kworker/4:1 Not tainted 6.11.0-rc5-reduced-00859-g780801200300 #23
<4>[ 574.475226] Hardware name: Intel(R) Client Systems NUC13ANHi7/NUC13ANBi7, BIOS ANRPL357.0026.2023.0314.1458 03/14/2023
<4>[ 574.475231] Workqueue: mld mld_ifc_work
<4>[ 574.475247] RIP: 0010:bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c
<4>[ 574.475257] Code: cc cc cc cc cc cc cc 80 00 00 00 cc cc cc cc cc cc cc cc f3 0f 1e fa 0f 1f 44 00 00 66 90 55 48 89 e5 f3 0f 1e fa 48 8b 57 20 <48> 8b 52 00 8b 92 e0 00 00 00 48 bf f8 a6 d5 c4 5d a0 ff ff be 0b
<4>[ 574.475263] RSP: 0018:ffffa62440280c98 EFLAGS: 00010206
<4>[ 574.475269] RAX: ffffa62440280cd8 RBX: 0000000000000001 RCX: 0000000000000000
<4>[ 574.475274] RDX: 0000000000000000 RSI: ffffa62440549048 RDI: ffffa62440280ce0
<4>[ 574.475278] RBP: ffffa62440280c98 R08: 0000000000000002 R09: 0000000000000001
<4>[ 574.475281] R10: ffffa05dc8b98000 R11: ffffa05f577fca40 R12: ffffa05dcab24000
<4>[ 574.475285] R13: ffffa62440280ce0 R14: ffffa62440549048 R15: ffffa62440549000
<4>[ 574.475289] FS: 0000000000000000(0000) GS:ffffa05f4f700000(0000) knlGS:0000000000000000
<4>[ 574.475294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 574.475298] CR2: 0000000000000000 CR3: 000000025522e000 CR4: 0000000000f50ef0
<4>[ 574.475303] PKRU: 55555554
<4>[ 574.475306] Call Trace:
<4>[ 574.475313] <IRQ>
<4>[ 574.475318] ? __die+0x23/0x70
<4>[ 574.475329] ? page_fault_oops+0x180/0x4c0
<4>[ 574.475339] ? skb_pp_cow_data+0x34c/0x490
<4>[ 574.475346] ? kmem_cache_free+0x257/0x280
<4>[ 574.475357] ? exc_page_fault+0x67/0x150
<4>[ 574.475368] ? asm_exc_page_fault+0x26/0x30
<4>[ 574.475381] ? bpf_prog_5e13354d9cf5018a_prog_after_redirect+0x17/0x3c
<4>[ 574.475386] bq_xmit_all+0x158/0x420
<4>[ 574.475397] __dev_flush+0x30/0x90
<4>[ 574.475407] veth_poll+0x216/0x250 [veth]
<4>[ 574.475421] __napi_poll+0x28/0x1c0
<4>[ 574.475430] net_rx_action+0x32d/0x3a0
<4>[ 574.475441] handle_softirqs+0xcb/0x2c0
<4>[ 574.475451] do_softirq+0x40/0x60
<4>[ 574.475458] </IRQ>
<4>[ 574.475461] <TASK>
<4>[ 574.475464] __local_bh_enable_ip+0x66/0x70
<4>[ 574.475471] __dev_queue_xmit+0x268/0xe40
<4>[ 574.475480] ? selinux_ip_postroute+0x213/0x420
<4>[ 574.475491] ? alloc_skb_with_frags+0x4a/0x1d0
<4>[ 574.475502] ip6_finish_output2+0x2be/0x640
<4>[ 574.475512] ? nf_hook_slow+0x42/0xf0
<4>[ 574.475521] ip6_finish_output+0x194/0x300
<4>[ 574.475529] ? __pfx_ip6_finish_output+0x10/0x10
<4>[ 574.475538] mld_sendpack+0x17c/0x240
<4>[ 574.475548] mld_ifc_work+0x192/0x410
<4>[ 574.475557] process_one_work+0x15d/0x380
<4>[ 574.475566] worker_thread+0x29d/0x3a0
<4>[ 574.475573] ? __pfx_worker_thread+0x10/0x10
<4>[ 574.475580] ? __pfx_worker_thread+0x10/0x10
<4>[ 574.475587] kthread+0xcd/0x100
<4>[ 574.475597] ? __pfx_kthread+0x10/0x10
<4>[ 574.475606] ret_from_fork+0x31/0x50
<4>[ 574.475615] ? __pfx_kthread+0x10/0x10
<4>[ 574.475623] ret_from_fork_asm+0x1a/0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check the remaining info_cnt before repeating btf fields
When trying to repeat the btf fields for array of nested struct, it
doesn't check the remaining info_cnt. The following splat will be
reported when the value of ret * nelems is greater than BTF_FIELDS_MAX:
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in ../kernel/bpf/btf.c:3951:49
index 11 is out of range for type 'btf_field_info [11]'
CPU: 6 UID: 0 PID: 411 Comm: test_progs ...... 6.11.0-rc4+ #1
Tainted: [O]=OOT_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ...
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x70
dump_stack+0x10/0x20
ubsan_epilogue+0x9/0x40
__ubsan_handle_out_of_bounds+0x6f/0x80
? kallsyms_lookup_name+0x48/0xb0
btf_parse_fields+0x992/0xce0
map_create+0x591/0x770
__sys_bpf+0x229/0x2410
__x64_sys_bpf+0x1f/0x30
x64_sys_call+0x199/0x9f0
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fea56f2cc5d
......
</TASK>
---[ end trace ]---
Fix it by checking the remaining info_cnt in btf_repeat_fields() before
repeating the btf fields. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup()
Clang static checker(scan-build) throws below warning：
| drivers/firmware/arm_scmi/driver.c:line 2915, column 2
| Attempt to free released memory.
When devm_add_action_or_reset() fails, scmi_debugfs_common_cleanup()
will run twice which causes double free of 'dbg->name'.
Remove the redundant scmi_debugfs_common_cleanup() to fix this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler().
"""
We are seeing a use-after-free from a bpf prog attached to
trace_tcp_retransmit_synack. The program passes the req->sk to the
bpf_sk_storage_get_tracing kernel helper which does check for null
before using it.
"""
The commit 83fccfc3940c ("inet: fix potential deadlock in
reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not
to call del_timer_sync() from reqsk_timer_handler(), but it introduced a
small race window.
Before the timer is called, expire_timers() calls detach_timer(timer, true)
to clear timer->entry.pprev and marks it as not pending.
If reqsk_queue_unlink() checks timer_pending() just after expire_timers()
calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will
continue running and send multiple SYN+ACKs until it expires.
The reported UAF could happen if req->sk is close()d earlier than the timer
expiration, which is 63s by default.
The scenario would be
1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(),
but del_timer_sync() is missed
2. reqsk timer is executed and scheduled again
3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but
reqsk timer still has another one, and inet_csk_accept() does not
clear req->sk for non-TFO sockets
4. sk is close()d
5. reqsk timer is executed again, and BPF touches req->sk
Let's not use timer_pending() by passing the caller context to
__inet_csk_reqsk_queue_drop().
Note that reqsk timer is pinned, so the issue does not happen in most
use cases. [1]
[0]
BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0
Use-after-free read at 0x00000000a891fb3a (in kfence-#1):
bpf_sk_storage_get_tracing+0x2e/0x1b0
bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda
bpf_trace_run2+0x4c/0xc0
tcp_rtx_synack+0xf9/0x100
reqsk_timer_handler+0xda/0x3d0
run_timer_softirq+0x292/0x8a0
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
intel_idle_irq+0x5a/0xa0
cpuidle_enter_state+0x94/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6
allocated by task 0 on cpu 9 at 260507.901592s:
sk_prot_alloc+0x35/0x140
sk_clone_lock+0x1f/0x3f0
inet_csk_clone_lock+0x15/0x160
tcp_create_openreq_child+0x1f/0x410
tcp_v6_syn_recv_sock+0x1da/0x700
tcp_check_req+0x1fb/0x510
tcp_v6_rcv+0x98b/0x1420
ipv6_list_rcv+0x2258/0x26e0
napi_complete_done+0x5b1/0x2990
mlx5e_napi_poll+0x2ae/0x8d0
net_rx_action+0x13e/0x590
irq_exit_rcu+0xf5/0x320
common_interrupt+0x80/0x90
asm_common_interrupt+0x22/0x40
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
freed by task 0 on cpu 9 at 260507.927527s:
rcu_core_si+0x4ff/0xf10
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix possible double free in smb2_set_ea()
Clang static checker(scan-build) warning：
fs/smb/client/smb2ops.c:1304:2: Attempt to free released memory.
1304 | kfree(ea);
| ^~~~~~~~~
There is a double free in such case:
'ea is initialized to NULL' -> 'first successful memory allocation for
ea' -> 'something failed, goto sea_exit' -> 'first memory release for ea'
-> 'goto replay_again' -> 'second goto sea_exit before allocate memory
for ea' -> 'second memory release for ea resulted in double free'.
Re-initialie 'ea' to NULL near to the replay_again label, it can fix this
double free problem. |
| In the Linux kernel, the following vulnerability has been resolved:
octeon_ep: Add SKB allocation failures handling in __octep_oq_process_rx()
build_skb() returns NULL in case of a memory allocation failure so handle
it inside __octep_oq_process_rx() to avoid NULL pointer dereference.
__octep_oq_process_rx() is called during NAPI polling by the driver. If
skb allocation fails, keep on pulling packets out of the Rx DMA queue: we
shouldn't break the polling immediately and thus falsely indicate to the
octep_napi_poll() that the Rx pressure is going down. As there is no
associated skb in this case, don't process the packets and don't push them
up the network stack - they are skipped.
Helper function is implemented to unmmap/flush all the fragment buffers
used by the dropped packet. 'alloc_failures' counter is incremented to
mark the skb allocation error in driver statistics.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: fix uninit-value use in udf_get_fileshortad
Check for overflow when computing alen in udf_current_aext to mitigate
later uninit-value use in udf_get_fileshortad KMSAN bug[1].
After applying the patch reproducer did not trigger any issue[2].
[1] https://syzkaller.appspot.com/bug?extid=8901c4560b7ab5c2f9df
[2] https://syzkaller.appspot.com/x/log.txt?x=10242227980000 |
