| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tls: stop recv() if initial process_rx_list gave us non-DATA
If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list
did some work. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
This fixes the tx timeout issue seen while running a stress test on
btnxpuart for couple of hours, such that the interval between two HCI
commands coincide with the power save timeout value of 2 seconds.
Test procedure using bash script:
<load btnxpuart.ko>
hciconfig hci0 up
//Enable Power Save feature
hcitool -i hci0 cmd 3f 23 02 00 00
while (true)
do
hciconfig hci0 leadv
sleep 2
hciconfig hci0 noleadv
sleep 2
done
Error log, after adding few more debug prints:
Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00
Bluetooth: hci0: Set UART break: on, status=0
Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled
Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00
Can't set advertise mode on hci0: Connection timed out (110)
Bluetooth: hci0: command 0x200a tx timeout
When the power save mechanism turns on UART break, and btnxpuart_tx_work()
is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE,
which prevents the psdata->work from being scheduled, which is responsible
to turn OFF UART break.
This issue is fixed by adding a ps_lock mutex around UART break on/off as
well as around ps_state read/write.
btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is
PS_STATE_SLEEP, it will first schedule psdata->work, and then it will
reschedule itself once UART break has been turned off and ps_state is
PS_STATE_AWAKE.
Tested above script for 50,000 iterations and TX timeout error was not
observed anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: consider that tail calls invalidate packet pointers
Tail-called programs could execute any of the helpers that invalidate
packet pointers. Hence, conservatively assume that each tail call
invalidates packet pointers.
Making the change in bpf_helper_changes_pkt_data() automatically makes
use of check_cfg() logic that computes 'changes_pkt_data' effect for
global sub-programs, such that the following program could be
rejected:
int tail_call(struct __sk_buff *sk)
{
bpf_tail_call_static(sk, &jmp_table, 0);
return 0;
}
SEC("tc")
int not_safe(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
... make p valid ...
tail_call(sk);
*p = 42; /* this is unsafe */
...
}
The tc_bpf2bpf.c:subprog_tc() needs change: mark it as a function that
can invalidate packet pointers. Otherwise, it can't be freplaced with
tailcall_freplace.c:entry_freplace() that does a tail call. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: check changes_pkt_data property for extension programs
When processing calls to global sub-programs, verifier decides whether
to invalidate all packet pointers in current state depending on the
changes_pkt_data property of the global sub-program.
Because of this, an extension program replacing a global sub-program
must be compatible with changes_pkt_data property of the sub-program
being replaced.
This commit:
- adds changes_pkt_data flag to struct bpf_prog_aux:
- this flag is set in check_cfg() for main sub-program;
- in jit_subprogs() for other sub-programs;
- modifies bpf_check_attach_btf_id() to check changes_pkt_data flag;
- moves call to check_attach_btf_id() after the call to check_cfg(),
because it needs changes_pkt_data flag to be set:
bpf_check:
... ...
- check_attach_btf_id resolve_pseudo_ldimm64
resolve_pseudo_ldimm64 --> bpf_prog_is_offloaded
bpf_prog_is_offloaded check_cfg
check_cfg + check_attach_btf_id
... ...
The following fields are set by check_attach_btf_id():
- env->ops
- prog->aux->attach_btf_trace
- prog->aux->attach_func_name
- prog->aux->attach_func_proto
- prog->aux->dst_trampoline
- prog->aux->mod
- prog->aux->saved_dst_attach_type
- prog->aux->saved_dst_prog_type
- prog->expected_attach_type
Neither of these fields are used by resolve_pseudo_ldimm64() or
bpf_prog_offload_verifier_prep() (for netronome and netdevsim
drivers), so the reordering is safe. |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
Andrew and Nikolay reported connectivity issues with Cilium's service
load-balancing in case of vmxnet3.
If a BPF program for native XDP adds an encapsulation header such as
IPIP and transmits the packet out the same interface, then in case
of vmxnet3 a corrupted packet is being sent and subsequently dropped
on the path.
vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp()
through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address:
page = virt_to_page(xdpf->data);
tbi->dma_addr = page_pool_get_dma_addr(page) +
VMXNET3_XDP_HEADROOM;
dma_sync_single_for_device(&adapter->pdev->dev,
tbi->dma_addr, buf_size,
DMA_TO_DEVICE);
The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP
BPF program could have moved xdp->data. While the passed buf_size is
correct (xdpf->len), the dma_addr needs to have a dynamic offset which
can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data -
xdp->data_hard_start. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: track changes_pkt_data property for global functions
When processing calls to certain helpers, verifier invalidates all
packet pointers in a current state. For example, consider the
following program:
__attribute__((__noinline__))
long skb_pull_data(struct __sk_buff *sk, __u32 len)
{
return bpf_skb_pull_data(sk, len);
}
SEC("tc")
int test_invalidate_checks(struct __sk_buff *sk)
{
int *p = (void *)(long)sk->data;
if ((void *)(p + 1) > (void *)(long)sk->data_end) return TCX_DROP;
skb_pull_data(sk, 0);
*p = 42;
return TCX_PASS;
}
After a call to bpf_skb_pull_data() the pointer 'p' can't be used
safely. See function filter.c:bpf_helper_changes_pkt_data() for a list
of such helpers.
At the moment verifier invalidates packet pointers when processing
helper function calls, and does not traverse global sub-programs when
processing calls to global sub-programs. This means that calls to
helpers done from global sub-programs do not invalidate pointers in
the caller state. E.g. the program above is unsafe, but is not
rejected by verifier.
This commit fixes the omission by computing field
bpf_subprog_info->changes_pkt_data for each sub-program before main
verification pass.
changes_pkt_data should be set if:
- subprogram calls helper for which bpf_helper_changes_pkt_data
returns true;
- subprogram calls a global function,
for which bpf_subprog_info->changes_pkt_data should be set.
The verifier.c:check_cfg() pass is modified to compute this
information. The commit relies on depth first instruction traversal
done by check_cfg() and absence of recursive function calls:
- check_cfg() would eventually visit every call to subprogram S in a
state when S is fully explored;
- when S is fully explored:
- every direct helper call within S is explored
(and thus changes_pkt_data is set if needed);
- every call to subprogram S1 called by S was visited with S1 fully
explored (and thus S inherits changes_pkt_data from S1).
The downside of such approach is that dead code elimination is not
taken into account: if a helper call inside global function is dead
because of current configuration, verifier would conservatively assume
that the call occurs for the purpose of the changes_pkt_data
computation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode
ath11k_hal_srng_* should be used with srng->lock to protect srng data.
For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(),
they use ath11k_hal_srng_* for many times but never call srng->lock.
So when running (full) monitor mode, warning will occur:
RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
Call Trace:
? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k]
ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k]
? idr_alloc_u32+0x97/0xd0
ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k]
ath11k_dp_service_srng+0x289/0x5a0 [ath11k]
ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k]
__napi_poll+0x30/0x1f0
net_rx_action+0x198/0x320
__do_softirq+0xdd/0x319
So add srng->lock for them to avoid such warnings.
Inorder to fetch the srng->lock, should change srng's definition from
'void' to 'struct hal_srng'. And initialize them elsewhere to prevent
one line of code from being too long. This is consistent with other ring
process functions, such as ath11k_dp_process_rx().
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before truncation in jfs_truncate_nolock()
Added a check for "read-only" mode in the `jfs_truncate_nolock`
function to avoid errors related to writing to a read-only
filesystem.
Call stack:
block_write_begin() {
jfs_write_failed() {
jfs_truncate() {
jfs_truncate_nolock() {
txEnd() {
...
log = JFS_SBI(tblk->sb)->log;
// (log == NULL)
If the `isReadOnly(ip)` condition is triggered in
`jfs_truncate_nolock`, the function execution will stop, and no
further data modification will occur. Instead, the `xtTruncate`
function will be called with the "COMMIT_WMAP" flag, preventing
modifications in "read-only" mode. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/fbdev-dma: Add shadow buffering for deferred I/O
DMA areas are not necessarily backed by struct page, so we cannot
rely on it for deferred I/O. Allocate a shadow buffer for drivers
that require deferred I/O and use it as framebuffer memory.
Fixes driver errors about being "Unable to handle kernel NULL pointer
dereference at virtual address" or "Unable to handle kernel paging
request at virtual address".
The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial
allocation, which creates the DMA-backed buffer object, and a tail
that sets up the fbdev data structures. There is a tail function for
direct memory mappings and a tail function for deferred I/O with
the shadow buffer.
It is no longer possible to use deferred I/O without shadow buffer.
It can be re-added if there exists a reliably test for usable struct
page in the allocated DMA-backed buffer object. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix double accounting race when btrfs_run_delalloc_range() failed
[BUG]
When running btrfs with block size (4K) smaller than page size (64K,
aarch64), there is a very high chance to crash the kernel at
generic/750, with the following messages:
(before the call traces, there are 3 extra debug messages added)
BTRFS warning (device dm-3): read-write for sector size 4096 with page size 65536 is experimental
BTRFS info (device dm-3): checking UUID tree
hrtimer: interrupt took 5451385 ns
BTRFS error (device dm-3): cow_file_range failed, root=4957 inode=257 start=1605632 len=69632: -28
BTRFS error (device dm-3): run_delalloc_nocow failed, root=4957 inode=257 start=1605632 len=69632: -28
BTRFS error (device dm-3): failed to run delalloc range, root=4957 ino=257 folio=1572864 submit_bitmap=8-15 start=1605632 len=69632: -28
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3020984 at ordered-data.c:360 can_finish_ordered_extent+0x370/0x3b8 [btrfs]
CPU: 2 UID: 0 PID: 3020984 Comm: kworker/u24:1 Tainted: G OE 6.13.0-rc1-custom+ #89
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : can_finish_ordered_extent+0x370/0x3b8 [btrfs]
lr : can_finish_ordered_extent+0x1ec/0x3b8 [btrfs]
Call trace:
can_finish_ordered_extent+0x370/0x3b8 [btrfs] (P)
can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] (L)
btrfs_mark_ordered_io_finished+0x130/0x2b8 [btrfs]
extent_writepage+0x10c/0x3b8 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x160 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x74/0xa0
start_delalloc_inodes+0x17c/0x3b0 [btrfs]
btrfs_start_delalloc_roots+0x17c/0x288 [btrfs]
shrink_delalloc+0x11c/0x280 [btrfs]
flush_space+0x288/0x328 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x228/0x680
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1605632 OE len=16384 to_dec=16384 left=0
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1622016 OE len=12288 to_dec=12288 left=0
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1634304 OE len=8192 to_dec=4096 left=0
CPU: 1 UID: 0 PID: 3286940 Comm: kworker/u24:3 Tainted: G W OE 6.13.0-rc1-custom+ #89
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: btrfs_work_helper [btrfs] (btrfs-endio-write)
pstate: 404000c5 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : process_one_work+0x110/0x680
lr : worker_thread+0x1bc/0x360
Call trace:
process_one_work+0x110/0x680 (P)
worker_thread+0x1bc/0x360 (L)
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: f84086a1 f9000fe1 53041c21 b9003361 (f9400661)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 2-3
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: 0x275bb9540000 from 0xffff800080000000
PHYS_OFFSET: 0xffff8fbba0000000
CPU features: 0x100,00000070,00801250,8201720b
[CAUSE]
The above warning is triggered immediately after the delalloc range
failure, this happens in the following sequence:
- Range [1568K, 1636K) is dirty
1536K 1568K 1600K 1636K 1664K
| |/////////|////////| |
Where 1536K, 1600K and 1664K are page boundaries (64K page size)
- Enter extent_writepage() for page 1536K
- Enter run_delalloc_nocow() with locke
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix racy issue from session lookup and expire
Increment the session reference count within the lock for lookup to avoid
racy issue with session expire. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Stop active perfmon if it is being destroyed
If the active performance monitor (`v3d->active_perfmon`) is being
destroyed, stop it first. Currently, the active perfmon is not
stopped during destruction, leaving the `v3d->active_perfmon` pointer
stale. This can lead to undefined behavior and instability.
This patch ensures that the active perfmon is stopped before being
destroyed, aligning with the behavior introduced in commit
7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: uvcvideo: Fix crash during unbind if gpio unit is in use
We used the wrong device for the device managed functions. We used the
usb device, when we should be using the interface device.
If we unbind the driver from the usb interface, the cleanup functions
are never called. In our case, the IRQ is never disabled.
If an IRQ is triggered, it will try to access memory sections that are
already free, causing an OOPS.
We cannot use the function devm_request_threaded_irq here. The devm_*
clean functions may be called after the main structure is released by
uvc_delete.
Luckily this bug has small impact, as it is only affected by devices
with gpio units and the user has to unbind the device, a disconnect will
not trigger this error. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: tegra - do not transfer req when tegra init fails
The tegra_cmac_init or tegra_sha_init function may return an error when
memory is exhausted. It should not transfer the request when they return
an error. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: bpf_local_storage: Always use bpf_mem_alloc in PREEMPT_RT
In PREEMPT_RT, kmalloc(GFP_ATOMIC) is still not safe in non preemptible
context. bpf_mem_alloc must be used in PREEMPT_RT. This patch is
to enforce bpf_mem_alloc in the bpf_local_storage when CONFIG_PREEMPT_RT
is enabled.
[ 35.118559] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
[ 35.118566] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1832, name: test_progs
[ 35.118569] preempt_count: 1, expected: 0
[ 35.118571] RCU nest depth: 1, expected: 1
[ 35.118577] INFO: lockdep is turned off.
...
[ 35.118647] __might_resched+0x433/0x5b0
[ 35.118677] rt_spin_lock+0xc3/0x290
[ 35.118700] ___slab_alloc+0x72/0xc40
[ 35.118723] __kmalloc_noprof+0x13f/0x4e0
[ 35.118732] bpf_map_kzalloc+0xe5/0x220
[ 35.118740] bpf_selem_alloc+0x1d2/0x7b0
[ 35.118755] bpf_local_storage_update+0x2fa/0x8b0
[ 35.118784] bpf_sk_storage_get_tracing+0x15a/0x1d0
[ 35.118791] bpf_prog_9a118d86fca78ebb_trace_inet_sock_set_state+0x44/0x66
[ 35.118795] bpf_trace_run3+0x222/0x400
[ 35.118820] __bpf_trace_inet_sock_set_state+0x11/0x20
[ 35.118824] trace_inet_sock_set_state+0x112/0x130
[ 35.118830] inet_sk_state_store+0x41/0x90
[ 35.118836] tcp_set_state+0x3b3/0x640
There is no need to adjust the gfp_flags passing to the
bpf_mem_cache_alloc_flags() which only honors the GFP_KERNEL.
The verifier has ensured GFP_KERNEL is passed only in sleepable context.
It has been an old issue since the first introduction of the
bpf_local_storage ~5 years ago, so this patch targets the bpf-next.
bpf_mem_alloc is needed to solve it, so the Fixes tag is set
to the commit when bpf_mem_alloc was first used in the bpf_local_storage. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix handling of received connection abort
Fix the handling of a connection abort that we've received. Though the
abort is at the connection level, it needs propagating to the calls on that
connection. Whilst the propagation bit is performed, the calls aren't then
woken up to go and process their termination, and as no further input is
forthcoming, they just hang.
Also add some tracing for the logging of connection aborts. |
| In the Linux kernel, the following vulnerability has been resolved:
nvkm/gsp: correctly advance the read pointer of GSP message queue
A GSP event message consists three parts: message header, RPC header,
message body. GSP calculates the number of pages to write from the
total size of a GSP message. This behavior can be observed from the
movement of the write pointer.
However, nvkm takes only the size of RPC header and message body as
the message size when advancing the read pointer. When handling a
two-page GSP message in the non rollback case, It wrongly takes the
message body of the previous message as the message header of the next
message. As the "message length" tends to be zero, in the calculation of
size needs to be copied (0 - size of (message header)), the size needs to
be copied will be "0xffffffxx". It also triggers a kernel panic due to a
NULL pointer error.
[ 547.614102] msg: 00000f90: ff ff ff ff ff ff ff ff 40 d7 18 fb 8b 00 00 00 ........@.......
[ 547.622533] msg: 00000fa0: 00 00 00 00 ff ff ff ff ff ff ff ff 00 00 00 00 ................
[ 547.630965] msg: 00000fb0: ff ff ff ff ff ff ff ff 00 00 00 00 ff ff ff ff ................
[ 547.639397] msg: 00000fc0: ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................
[ 547.647832] nvkm 0000:c1:00.0: gsp: peek msg rpc fn:0 len:0x0/0xffffffffffffffe0
[ 547.655225] nvkm 0000:c1:00.0: gsp: get msg rpc fn:0 len:0x0/0xffffffffffffffe0
[ 547.662532] BUG: kernel NULL pointer dereference, address: 0000000000000020
[ 547.669485] #PF: supervisor read access in kernel mode
[ 547.674624] #PF: error_code(0x0000) - not-present page
[ 547.679755] PGD 0 P4D 0
[ 547.682294] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 547.686643] CPU: 22 PID: 322 Comm: kworker/22:1 Tainted: G E 6.9.0-rc6+ #1
[ 547.694893] Hardware name: ASRockRack 1U1G-MILAN/N/ROMED8-NL, BIOS L3.12E 09/06/2022
[ 547.702626] Workqueue: events r535_gsp_msgq_work [nvkm]
[ 547.707921] RIP: 0010:r535_gsp_msg_recv+0x87/0x230 [nvkm]
[ 547.713375] Code: 00 8b 70 08 48 89 e1 31 d2 4c 89 f7 e8 12 f5 ff ff 48 89 c5 48 85 c0 0f 84 cf 00 00 00 48 81 fd 00 f0 ff ff 0f 87 c4 00 00 00 <8b> 55 10 41 8b 46 30 85 d2 0f 85 f6 00 00 00 83 f8 04 76 10 ba 05
[ 547.732119] RSP: 0018:ffffabe440f87e10 EFLAGS: 00010203
[ 547.737335] RAX: 0000000000000010 RBX: 0000000000000008 RCX: 000000000000003f
[ 547.744461] RDX: 0000000000000000 RSI: ffffabe4480a8030 RDI: 0000000000000010
[ 547.751585] RBP: 0000000000000010 R08: 0000000000000000 R09: ffffabe440f87bb0
[ 547.758707] R10: ffffabe440f87dc8 R11: 0000000000000010 R12: 0000000000000000
[ 547.765834] R13: 0000000000000000 R14: ffff9351df1e5000 R15: 0000000000000000
[ 547.772958] FS: 0000000000000000(0000) GS:ffff93708eb00000(0000) knlGS:0000000000000000
[ 547.781035] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 547.786771] CR2: 0000000000000020 CR3: 00000003cc220002 CR4: 0000000000770ef0
[ 547.793896] PKRU: 55555554
[ 547.796600] Call Trace:
[ 547.799046] <TASK>
[ 547.801152] ? __die+0x20/0x70
[ 547.804211] ? page_fault_oops+0x75/0x170
[ 547.808221] ? print_hex_dump+0x100/0x160
[ 547.812226] ? exc_page_fault+0x64/0x150
[ 547.816152] ? asm_exc_page_fault+0x22/0x30
[ 547.820341] ? r535_gsp_msg_recv+0x87/0x230 [nvkm]
[ 547.825184] r535_gsp_msgq_work+0x42/0x50 [nvkm]
[ 547.829845] process_one_work+0x196/0x3d0
[ 547.833861] worker_thread+0x2fc/0x410
[ 547.837613] ? __pfx_worker_thread+0x10/0x10
[ 547.841885] kthread+0xdf/0x110
[ 547.845031] ? __pfx_kthread+0x10/0x10
[ 547.848775] ret_from_fork+0x30/0x50
[ 547.852354] ? __pfx_kthread+0x10/0x10
[ 547.856097] ret_from_fork_asm+0x1a/0x30
[ 547.860019] </TASK>
[ 547.862208] Modules linked in: nvkm(E) gsp_log(E) snd_seq_dummy(E) snd_hrtimer(E) snd_seq(E) snd_timer(E) snd_seq_device(E) snd(E) soundcore(E) rfkill(E) qrtr(E) vfat(E) fat(E) ipmi_ssif(E) amd_atl(E) intel_rapl_msr(E) intel_rapl_common(E) amd64_edac(E) mlx5_ib(E) edac_mce_amd(E) kvm_amd
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_flat: Fix integer overflow bug on 32 bit systems
Most of these sizes and counts are capped at 256MB so the math doesn't
result in an integer overflow. The "relocs" count needs to be checked
as well. Otherwise on 32bit systems the calculation of "full_data"
could be wrong.
full_data = data_len + relocs * sizeof(unsigned long); |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: dcp: fix improper sg use with CONFIG_VMAP_STACK=y
With vmalloc stack addresses enabled (CONFIG_VMAP_STACK=y) DCP trusted
keys can crash during en- and decryption of the blob encryption key via
the DCP crypto driver. This is caused by improperly using sg_init_one()
with vmalloc'd stack buffers (plain_key_blob).
Fix this by always using kmalloc() for buffers we give to the DCP crypto
driver. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: ep: Prevent changing BAR size/flags in pci_epc_set_bar()
In commit 4284c88fff0e ("PCI: designware-ep: Allow pci_epc_set_bar() update
inbound map address") set_bar() was modified to support dynamically
changing the backing physical address of a BAR that was already configured.
This means that set_bar() can be called twice, without ever calling
clear_bar() (as calling clear_bar() would clear the BAR's PCI address
assigned by the host).
This can only be done if the new BAR size/flags does not differ from the
existing BAR configuration. Add these missing checks.
If we allow set_bar() to set e.g. a new BAR size that differs from the
existing BAR size, the new address translation range will be smaller than
the BAR size already determined by the host, which would mean that a read
past the new BAR size would pass the iATU untranslated, which could allow
the host to read memory not belonging to the new struct pci_epf_bar.
While at it, add comments which clarifies the support for dynamically
changing the physical address of a BAR. (Which was also missing.) |
