| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
virt: tdx-guest: Just leak decrypted memory on unrecoverable errors
In CoCo VMs it is possible for the untrusted host to cause
set_memory_decrypted() to fail such that an error is returned
and the resulting memory is shared. Callers need to take care
to handle these errors to avoid returning decrypted (shared)
memory to the page allocator, which could lead to functional
or security issues.
Leak the decrypted memory when set_memory_decrypted() fails,
and don't need to print an error since set_memory_decrypted()
will call WARN_ONCE(). |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: gpio-charger: Fix set charge current limits
Fix set charge current limits for devices which allow to set the lowest
charge current limit to be greater zero. If requested charge current limit
is below lowest limit, the index equals current_limit_map_size which leads
to accessing memory beyond allocated memory. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: oa_tc6: fix tx skb race condition between reference pointers
There are two skb pointers to manage tx skb's enqueued from n/w stack.
waiting_tx_skb pointer points to the tx skb which needs to be processed
and ongoing_tx_skb pointer points to the tx skb which is being processed.
SPI thread prepares the tx data chunks from the tx skb pointed by the
ongoing_tx_skb pointer. When the tx skb pointed by the ongoing_tx_skb is
processed, the tx skb pointed by the waiting_tx_skb is assigned to
ongoing_tx_skb and the waiting_tx_skb pointer is assigned with NULL.
Whenever there is a new tx skb from n/w stack, it will be assigned to
waiting_tx_skb pointer if it is NULL. Enqueuing and processing of a tx skb
handled in two different threads.
Consider a scenario where the SPI thread processed an ongoing_tx_skb and
it moves next tx skb from waiting_tx_skb pointer to ongoing_tx_skb pointer
without doing any NULL check. At this time, if the waiting_tx_skb pointer
is NULL then ongoing_tx_skb pointer is also assigned with NULL. After
that, if a new tx skb is assigned to waiting_tx_skb pointer by the n/w
stack and there is a chance to overwrite the tx skb pointer with NULL in
the SPI thread. Finally one of the tx skb will be left as unhandled,
resulting packet missing and memory leak.
- Consider the below scenario where the TXC reported from the previous
transfer is 10 and ongoing_tx_skb holds an tx ethernet frame which can be
transported in 20 TXCs and waiting_tx_skb is still NULL.
tx_credits = 10; /* 21 are filled in the previous transfer */
ongoing_tx_skb = 20;
waiting_tx_skb = NULL; /* Still NULL */
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true.
- After oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = 10;
waiting_tx_skb = NULL; /* Still NULL */
- Perform SPI transfer.
- Process SPI rx buffer to get the TXC from footers.
- Now let's assume previously filled 21 TXCs are freed so we are good to
transport the next remaining 10 tx chunks from ongoing_tx_skb.
tx_credits = 21;
ongoing_tx_skb = 10;
waiting_tx_skb = NULL;
- So, (tc6->ongoing_tx_skb || tc6->waiting_tx_skb) becomes true again.
- In the oa_tc6_prepare_spi_tx_buf_for_tx_skbs()
ongoing_tx_skb = NULL;
waiting_tx_skb = NULL;
- Now the below bad case might happen,
Thread1 (oa_tc6_start_xmit) Thread2 (oa_tc6_spi_thread_handler)
--------------------------- -----------------------------------
- if waiting_tx_skb is NULL
- if ongoing_tx_skb is NULL
- ongoing_tx_skb = waiting_tx_skb
- waiting_tx_skb = skb
- waiting_tx_skb = NULL
...
- ongoing_tx_skb = NULL
- if waiting_tx_skb is NULL
- waiting_tx_skb = skb
To overcome the above issue, protect the moving of tx skb reference from
waiting_tx_skb pointer to ongoing_tx_skb pointer and assigning new tx skb
to waiting_tx_skb pointer, so that the other thread can't access the
waiting_tx_skb pointer until the current thread completes moving the tx
skb reference safely. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix nfs4_openowner leak when concurrent nfsd4_open occur
The action force umount(umount -f) will attempt to kill all rpc_task even
umount operation may ultimately fail if some files remain open.
Consequently, if an action attempts to open a file, it can potentially
send two rpc_task to nfs server.
NFS CLIENT
thread1 thread2
open("file")
...
nfs4_do_open
_nfs4_do_open
_nfs4_open_and_get_state
_nfs4_proc_open
nfs4_run_open_task
/* rpc_task1 */
rpc_run_task
rpc_wait_for_completion_task
umount -f
nfs_umount_begin
rpc_killall_tasks
rpc_signal_task
rpc_task1 been wakeup
and return -512
_nfs4_do_open // while loop
...
nfs4_run_open_task
/* rpc_task2 */
rpc_run_task
rpc_wait_for_completion_task
While processing an open request, nfsd will first attempt to find or
allocate an nfs4_openowner. If it finds an nfs4_openowner that is not
marked as NFS4_OO_CONFIRMED, this nfs4_openowner will released. Since
two rpc_task can attempt to open the same file simultaneously from the
client to server, and because two instances of nfsd can run
concurrently, this situation can lead to lots of memory leak.
Additionally, when we echo 0 to /proc/fs/nfsd/threads, warning will be
triggered.
NFS SERVER
nfsd1 nfsd2 echo 0 > /proc/fs/nfsd/threads
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// alloc oo1, stateid1
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// find oo1, without NFS4_OO_CONFIRMED
release_openowner
unhash_openowner_locked
list_del_init(&oo->oo_perclient)
// cannot find this oo
// from client, LEAK!!!
alloc_stateowner // alloc oo2
nfsd4_process_open2
init_open_stateid
// associate oo1
// with stateid1, stateid1 LEAK!!!
nfs4_get_vfs_file
// alloc nfsd_file1 and nfsd_file_mark1
// all LEAK!!!
nfsd4_process_open2
...
write_threads
...
nfsd_destroy_serv
nfsd_shutdown_net
nfs4_state_shutdown_net
nfs4_state_destroy_net
destroy_client
__destroy_client
// won't find oo1!!!
nfsd_shutdown_generic
nfsd_file_cache_shutdown
kmem_cache_destroy
for nfsd_file_slab
and nfsd_file_mark_slab
// bark since nfsd_file1
// and nfsd_file_mark1
// still alive
=======================================================================
BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on
__kmem_cache_shutdown()
-----------------------------------------------------------------------
Slab 0xffd4000004438a80 objects=34 used=1 fp=0xff11000110e2ad28
flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff)
CPU: 4 UID: 0 PID: 757 Comm: sh Not tainted 6.12.0-rc6+ #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dum
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: mediatek: add intf release flow when usb disconnect
MediaTek claim an special usb intr interface for ISO data transmission.
The interface need to be released before unregistering hci device when
usb disconnect. Removing BT usb dongle without properly releasing the
interface may cause Kernel panic while unregister hci device. |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: fix dlm_recover_members refcount on error
If dlm_recover_members() fails we don't drop the references of the
previous created root_list that holds and keep all rsbs alive during the
recovery. It might be not an unlikely event because ping_members() could
run into an -EINTR if another recovery progress was triggered again. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Several fixes to bpf_msg_pop_data
Several fixes to bpf_msg_pop_data,
1. In sk_msg_shift_left, we should put_page
2. if (len == 0), return early is better
3. pop the entire sk_msg (last == msg->sg.size) should be supported
4. Fix for the value of variable "a"
5. In sk_msg_shift_left, after shifting, i has already pointed to the next
element. Addtional sk_msg_iter_var_next may result in BUG. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TSO DMA API usage causing oops
Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap
for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s
members to be later in stmmac_tso_xmit().
The buf (dma cookie) and len stored in this structure are passed to
dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that
the dma cookie passed to dma_unmap_single() is the same as the value
returned from dma_map_single(). However, by moving the assignment
later, this is not the case when priv->dma_cap.addr64 > 32 as "des"
is offset by proto_hdr_len.
This causes problems such as:
dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed
and with DMA_API_DEBUG enabled:
DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes]
Fix this by maintaining "des" as the original DMA cookie, and use
tso_des to pass the offset DMA cookie to stmmac_tso_allocator().
Full details of the crashes can be found at:
https://lore.kernel.org/all/[email protected]/
https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/ |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: protect link down work from execute after lgr freed
link down work may be scheduled before lgr freed but execute
after lgr freed, which may result in crash. So it is need to
hold a reference before shedule link down work, and put the
reference after work executed or canceled.
The relevant crash call stack as follows:
list_del corruption. prev->next should be ffffb638c9c0fe20,
but was 0000000000000000
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:51!
invalid opcode: 0000 [#1] SMP NOPTI
CPU: 6 PID: 978112 Comm: kworker/6:119 Kdump: loaded Tainted: G #1
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 2221b89 04/01/2014
Workqueue: events smc_link_down_work [smc]
RIP: 0010:__list_del_entry_valid.cold+0x31/0x47
RSP: 0018:ffffb638c9c0fdd8 EFLAGS: 00010086
RAX: 0000000000000054 RBX: ffff942fb75e5128 RCX: 0000000000000000
RDX: ffff943520930aa0 RSI: ffff94352091fc80 RDI: ffff94352091fc80
RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb638c9c0fc38
R10: ffffb638c9c0fc30 R11: ffffffffa015eb28 R12: 0000000000000002
R13: ffffb638c9c0fe20 R14: 0000000000000001 R15: ffff942f9cd051c0
FS: 0000000000000000(0000) GS:ffff943520900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4f25214000 CR3: 000000025fbae004 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
rwsem_down_write_slowpath+0x17e/0x470
smc_link_down_work+0x3c/0x60 [smc]
process_one_work+0x1ac/0x350
worker_thread+0x49/0x2f0
? rescuer_thread+0x360/0x360
kthread+0x118/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x1f/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mscc: ocelot: fix incorrect IFH SRC_PORT field in ocelot_ifh_set_basic()
Packets injected by the CPU should have a SRC_PORT field equal to the
CPU port module index in the Analyzer block (ocelot->num_phys_ports).
The blamed commit copied the ocelot_ifh_set_basic() call incorrectly
from ocelot_xmit_common() in net/dsa/tag_ocelot.c. Instead of calling
with "x", it calls with BIT_ULL(x), but the field is not a port mask,
but rather a single port index.
[ side note: this is the technical debt of code duplication :( ]
The error used to be silent and doesn't appear to have other
user-visible manifestations, but with new changes in the packing
library, it now fails loudly as follows:
------------[ cut here ]------------
Cannot store 0x40 inside bits 46-43 - will truncate
sja1105 spi2.0: xmit timed out
WARNING: CPU: 1 PID: 102 at lib/packing.c:98 __pack+0x90/0x198
sja1105 spi2.0: timed out polling for tstamp
CPU: 1 UID: 0 PID: 102 Comm: felix_xmit
Tainted: G W N 6.13.0-rc1-00372-gf706b85d972d-dirty #2605
Call trace:
__pack+0x90/0x198 (P)
__pack+0x90/0x198 (L)
packing+0x78/0x98
ocelot_ifh_set_basic+0x260/0x368
ocelot_port_inject_frame+0xa8/0x250
felix_port_deferred_xmit+0x14c/0x258
kthread_worker_fn+0x134/0x350
kthread+0x114/0x138
The code path pertains to the ocelot switchdev driver and to the felix
secondary DSA tag protocol, ocelot-8021q. Here seen with ocelot-8021q.
The messenger (packing) is not really to blame, so fix the original
commit instead. |
| In the Linux kernel, the following vulnerability has been resolved:
ionic: Fix netdev notifier unregister on failure
If register_netdev() fails, then the driver leaks the netdev notifier.
Fix this by calling ionic_lif_unregister() on register_netdev()
failure. This will also call ionic_lif_unregister_phc() if it has
already been registered. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: check if iowq is killed before queuing
task work can be executed after the task has gone through io_uring
termination, whether it's the final task_work run or the fallback path.
In this case, task work will find ->io_wq being already killed and
null'ed, which is a problem if it then tries to forward the request to
io_queue_iowq(). Make io_queue_iowq() fail requests in this case.
Note that it also checks PF_KTHREAD, because the user can first close
a DEFER_TASKRUN ring and shortly after kill the task, in which case
->iowq check would race. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cpum_sf: Fix and protect memory allocation of SDBs with mutex
Reservation of the PMU hardware is done at first event creation
and is protected by a pair of mutex_lock() and mutex_unlock().
After reservation of the PMU hardware the memory
required for the PMUs the event is to be installed on is
allocated by allocate_buffers() and alloc_sampling_buffer().
This done outside of the mutex protection.
Without mutex protection two or more concurrent invocations of
perf_event_init() may run in parallel.
This can lead to allocation of Sample Data Blocks (SDBs)
multiple times for the same PMU.
Prevent this and protect memory allocation of SDBs by
mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
9p/xen: fix release of IRQ
Kernel logs indicate an IRQ was double-freed.
Pass correct device ID during IRQ release.
[Dominique: remove confusing variable reset to 0] |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix soft lockups in fib6_select_path under high next hop churn
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix recursive lock when verdict program return SK_PASS
When the stream_verdict program returns SK_PASS, it places the received skb
into its own receive queue, but a recursive lock eventually occurs, leading
to an operating system deadlock. This issue has been present since v6.9.
'''
sk_psock_strp_data_ready
write_lock_bh(&sk->sk_callback_lock)
strp_data_ready
strp_read_sock
read_sock -> tcp_read_sock
strp_recv
cb.rcv_msg -> sk_psock_strp_read
# now stream_verdict return SK_PASS without peer sock assign
__SK_PASS = sk_psock_map_verd(SK_PASS, NULL)
sk_psock_verdict_apply
sk_psock_skb_ingress_self
sk_psock_skb_ingress_enqueue
sk_psock_data_ready
read_lock_bh(&sk->sk_callback_lock) <= dead lock
'''
This topic has been discussed before, but it has not been fixed.
Previous discussion:
https://lore.kernel.org/all/[email protected] |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on node blkaddr in truncate_node()
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2534!
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
Call Trace:
truncate_node+0x1ae/0x8c0 fs/f2fs/node.c:909
f2fs_remove_inode_page+0x5c2/0x870 fs/f2fs/node.c:1288
f2fs_evict_inode+0x879/0x15c0 fs/f2fs/inode.c:856
evict+0x4e8/0x9b0 fs/inode.c:723
f2fs_handle_failed_inode+0x271/0x2e0 fs/f2fs/inode.c:986
f2fs_create+0x357/0x530 fs/f2fs/namei.c:394
lookup_open fs/namei.c:3595 [inline]
open_last_lookups fs/namei.c:3694 [inline]
path_openat+0x1c03/0x3590 fs/namei.c:3930
do_filp_open+0x235/0x490 fs/namei.c:3960
do_sys_openat2+0x13e/0x1d0 fs/open.c:1415
do_sys_open fs/open.c:1430 [inline]
__do_sys_openat fs/open.c:1446 [inline]
__se_sys_openat fs/open.c:1441 [inline]
__x64_sys_openat+0x247/0x2a0 fs/open.c:1441
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
The root cause is: on a fuzzed image, blkaddr in nat entry may be
corrupted, then it will cause system panic when using it in
f2fs_invalidate_blocks(), to avoid this, let's add sanity check on
nat blkaddr in truncate_node(). |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport
Since transport->sock has been set to NULL during reset transport,
XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the
xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request()
to dereference the transport->sock that has been set to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mtk-cmdq: fix wrong use of sizeof in cmdq_get_clocks()
It should be size of the struct clk_bulk_data, not data pointer pass to
devm_kcalloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: bcm - add error check in the ahash_hmac_init function
The ahash_init functions may return fails. The ahash_hmac_init should
not return ok when ahash_init returns error. For an example, ahash_init
will return -ENOMEM when allocation memory is error. |
