| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly handle the implicit "deny ip any any" rule in an outgoing ACL when the ACL contains exactly 448 entries, which can allow some outgoing packets to bypass access restrictions. |
| Cisco Catalyst 2900XL switch allows a remote attacker to create a denial of service via an empty UDP packet sent to port 161 (SNMP) when SNMP is disabled. |
| Cisco PIX/ASA 7.1.x before 7.1(2) and 7.0.x before 7.0(5), PIX 6.3.x before 6.3.5(112), and FWSM 2.3.x before 2.3(4) and 3.x before 3.1(7), when used with Websense/N2H2, allows remote attackers to bypass HTTP access restrictions by splitting the GET method of an HTTP request into multiple packets, which prevents the request from being sent to Websense for inspection, aka bugs CSCsc67612, CSCsc68472, and CSCsd81734. |
| Cisco NAC maintains an exception list that does not record device properties other than MAC address, which allows physically proximate attackers to bypass control methods and join a local network by spoofing the MAC address of a different type of device, as demonstrated by using the MAC address of a disconnected printer. |
| Cisco NAC allows quarantined devices to communicate over the network with (1) DNS, (2) DHCP, and (3) EAPoUDP, which allows attackers to bypass control methods by tunneling network traffic through one of these protocols. |
| Cisco 12000 with IOS 12.0 and line cards based on Engine 2 does not properly filter does not properly filter packet fragments even when the "fragment" keyword is used in an ACL, which allows remote attackers to bypass the intended access controls. |
| Cisco IOS 12.0(5)XU through 12.1(2) allows remote attackers to read system administration and topology information via an "snmp-server host" command, which creates a readable "community" community string if one has not been previously created. |
| Cross-site scripting (XSS) vulnerability in the login page of the HTTP interface for the Cisco Wireless Control System (WCS) for Linux and Windows before 3.2(51) allows remote attackers to inject arbitrary web script or HTML via unspecified vectors involving a "malicious URL". |
| Buffer overflow in Cisco IOS 11.2.x to 12.0.x allows remote attackers to cause a denial of service and possibly execute commands via a large number of OSPF neighbor announcements. |
| AAA authentication on Cisco systems allows attackers to execute commands without authorization. |
| Heap-based buffer overflow in the VLAN Trunking Protocol (VTP) feature in Cisco IOS 12.1(19) allows remote attackers to execute arbitrary code via a long VLAN name in a VTP type 2 summary advertisement. |
| The on-line help system options in Cisco routers allows non-privileged users without "enabled" access to obtain sensitive information via the show command. |
| Cisco AS5350 IOS 12.2(11)T with access control lists (ACLs) applied and possibly with ssh running allows remote attackers to cause a denial of service (crash) via a port scan, possibly due to an ssh bug. NOTE: this issue could not be reproduced by the vendor |
| CiscoWorks Common Management Foundation (CMF) 2.1 and earlier allows the guest user to obtain restricted information and possibly gain administrative privileges by changing the "guest" user to the Admin user on the Modify or delete users pages. |
| Cisco Catalyst 5000 series switches 6.1(2) and earlier will forward an 802.1x frame on a Spanning Tree Protocol (STP) blocked port, which causes a network storm and a denial of service. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) feature of Cisco IOS Software, IOS XE Software, Secure Firewall Adaptive Security Appliance (ASA) Software, and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to a lack of proper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. In the case of Cisco IOS and IOS XE Software, a successful exploit could allow the attacker to cause the device to reload unexpectedly. In the case of Cisco ASA and FTD Software, a successful exploit could allow the attacker to partially exhaust system memory, causing system instability such as being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| A vulnerability in the IPv6 Router Advertisement (RA) packet processing of Cisco Access Point Software could allow an unauthenticated, adjacent attacker to modify the IPv6 gateway on an affected device.
This vulnerability is due to a logic error in the processing of IPv6 RA packets that are received from wireless clients. An attacker could exploit this vulnerability by associating to a wireless network and sending a series of crafted IPv6 RA packets. A successful exploit could allow the attacker to temporarily change the IPv6 gateway of an affected device. This could also lead to intermittent packet loss for any wireless clients that are associated with the affected device. |
| A vulnerability in the access control list (ACL) processing of IPv4 packets of Cisco SD-WAN vEdge Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to the improper enforcement of the implicit deny all at the end of a configured ACL. An attacker could exploit this vulnerability by attempting to send unauthorized traffic to an interface on an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. |
| Tinycontrol LAN Controller v3 (LK3) firmware versions up to 1.58a (hardware v3.8) contain a missing authentication vulnerability in the stm.cgi endpoint. A remote, unauthenticated attacker can send crafted requests to forcibly reboot the device or restore factory settings, leading to a denial of service and configuration loss. |
| A vulnerability in the HTTP API subsystem of Cisco IOS XE Software could allow a remote attacker to inject commands that will execute with root privileges into the underlying operating system.
This vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by authenticating to an affected system and performing an API call with crafted input. Alternatively, an unauthenticated attacker could persuade a legitimate user with administrative privileges who is currently logged in to the system to click a crafted link. A successful exploit could allow the attacker to execute arbitrary commands as the root user. |
