| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Ericsson Packet Core Controller (PCC) contains a
vulnerability where an attacker sending a large volume of specially
crafted messages may cause service degradation |
| An error related to the 2-factor authorization (2FA) on the RISC Platform prior to the saas-2021-12-29 release can potentially be exploited to bypass the 2FA. The vulnerability requires that the 2FA setup hasn’t been completed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Prevent drm_copy_field() to attempt copying a NULL pointer
There are some struct drm_driver fields that are required by drivers since
drm_copy_field() attempts to copy them to user-space via DRM_IOCTL_VERSION.
But it can be possible that a driver has a bug and did not set some of the
fields, which leads to drm_copy_field() attempting to copy a NULL pointer:
[ +10.395966] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000
[ +0.010955] Mem abort info:
[ +0.002835] ESR = 0x0000000096000004
[ +0.003872] EC = 0x25: DABT (current EL), IL = 32 bits
[ +0.005395] SET = 0, FnV = 0
[ +0.003113] EA = 0, S1PTW = 0
[ +0.003182] FSC = 0x04: level 0 translation fault
[ +0.004964] Data abort info:
[ +0.002919] ISV = 0, ISS = 0x00000004
[ +0.003886] CM = 0, WnR = 0
[ +0.003040] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000115dad000
[ +0.006536] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[ +0.006925] Internal error: Oops: 96000004 [#1] SMP
...
[ +0.011113] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ +0.007061] pc : __pi_strlen+0x14/0x150
[ +0.003895] lr : drm_copy_field+0x30/0x1a4
[ +0.004156] sp : ffff8000094b3a50
[ +0.003355] x29: ffff8000094b3a50 x28: ffff8000094b3b70 x27: 0000000000000040
[ +0.007242] x26: ffff443743c2ba00 x25: 0000000000000000 x24: 0000000000000040
[ +0.007243] x23: ffff443743c2ba00 x22: ffff8000094b3b70 x21: 0000000000000000
[ +0.007241] x20: 0000000000000000 x19: ffff8000094b3b90 x18: 0000000000000000
[ +0.007241] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaab14b9af40
[ +0.007241] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ +0.007239] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa524ad67d4d8
[ +0.007242] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : 6c6e6263606e7141
[ +0.007239] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[ +0.007241] x2 : 0000000000000000 x1 : ffff8000094b3b90 x0 : 0000000000000000
[ +0.007240] Call trace:
[ +0.002475] __pi_strlen+0x14/0x150
[ +0.003537] drm_version+0x84/0xac
[ +0.003448] drm_ioctl_kernel+0xa8/0x16c
[ +0.003975] drm_ioctl+0x270/0x580
[ +0.003448] __arm64_sys_ioctl+0xb8/0xfc
[ +0.003978] invoke_syscall+0x78/0x100
[ +0.003799] el0_svc_common.constprop.0+0x4c/0xf4
[ +0.004767] do_el0_svc+0x38/0x4c
[ +0.003357] el0_svc+0x34/0x100
[ +0.003185] el0t_64_sync_handler+0x11c/0x150
[ +0.004418] el0t_64_sync+0x190/0x194
[ +0.003716] Code: 92402c04 b200c3e8 f13fc09f 5400088c (a9400c02)
[ +0.006180] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: Fix race condition between concurrent dwc3_remove_requests() call paths
This patch addresses a race condition caused by unsynchronized
execution of multiple call paths invoking `dwc3_remove_requests()`,
leading to premature freeing of USB requests and subsequent crashes.
Three distinct execution paths interact with `dwc3_remove_requests()`:
Path 1:
Triggered via `dwc3_gadget_reset_interrupt()` during USB reset
handling. The call stack includes:
- `dwc3_ep0_reset_state()`
- `dwc3_ep0_stall_and_restart()`
- `dwc3_ep0_out_start()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 2:
Also initiated from `dwc3_gadget_reset_interrupt()`, but through
`dwc3_stop_active_transfers()`. The call stack includes:
- `dwc3_stop_active_transfers()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 3:
Occurs independently during `adb root` execution, which triggers
USB function unbind and bind operations. The sequence includes:
- `gserial_disconnect()`
- `usb_ep_disable()`
- `dwc3_gadget_ep_disable()`
- `dwc3_remove_requests()` with `-ESHUTDOWN` status
Path 3 operates asynchronously and lacks synchronization with Paths
1 and 2. When Path 3 completes, it disables endpoints and frees 'out'
requests. If Paths 1 or 2 are still processing these requests,
accessing freed memory leads to a crash due to use-after-free conditions.
To fix this added check for request completion and skip processing
if already completed and added the request status for ep0 while queue. |
| Agentflow developed by Flowring has an Use of Hard-coded Cryptographic Key vulnerability, allowing unauthenticated remote attackers to exploit the fixed key to generate verification information, thereby logging into the system as any user. Attacker must first obtain an user ID in order to exploit this vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
most: usb: fix double free on late probe failure
The MOST subsystem has a non-standard registration function which frees
the interface on registration failures and on deregistration.
This unsurprisingly leads to bugs in the MOST drivers, and a couple of
recent changes turned a reference underflow and use-after-free in the
USB driver into several double free and a use-after-free on late probe
failures. |
| The iSherlock developed by HGiga has an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server. |
| A vulnerability was found in China Mobile P22g-CIac, ZXWT-MIG-P4G4V, ZXWT-MIG-P8G8V, GT3200-4G4P and GT3200-8G8P up to 20250305. It has been rated as critical. This issue affects some unknown processing of the component CLI su Command Handler. The manipulation leads to use of default credentials. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: intel: punit_ipc: fix memory corruption
This passes the address of the pointer "&punit_ipcdev" when the intent
was to pass the pointer itself "punit_ipcdev" (without the ampersand).
This means that the:
complete(&ipcdev->cmd_complete);
in intel_punit_ioc() will write to a wrong memory address corrupting it. |
| OTP is a set of Erlang libraries, which consists of the Erlang runtime system, a number of ready-to-use components mainly written in Erlang, and a set of design principles for Erlang programs. A regression was introduced into the ssl application of OTP starting at OTP-25.3.2.8, OTP-26.2, and OTP-27.0, resulting in a server or client verifying the peer when incorrect extended key usage is presented (i.e., a server will verify a client if they have server auth ext key usage and vice versa). |
| check-jsonschema is a CLI and set of pre-commit hooks for jsonschema validation. The default cache strategy uses the basename of a remote schema as the name of the file in the cache, e.g. `https://example.org/schema.json` will be stored as `schema.json`. This naming allows for conflicts. If an attacker can get a user to run `check-jsonschema` against a malicious schema URL, e.g., `https://example.evil.org/schema.json`, they can insert their own schema into the cache and it will be picked up and used instead of the appropriate schema. Such a cache confusion attack could be used to allow data to pass validation which should have been rejected. This issue has been patched in version 0.30.0. All users are advised to upgrade. A few workarounds exist: 1. Users can use `--no-cache` to disable caching. 2. Users can use `--cache-filename` to select filenames for use in the cache, or to ensure that other usages do not overwrite the cached schema. (Note: this flag is being deprecated as part of the remediation effort.) 3. Users can explicitly download the schema before use as a local file, as in `curl -LOs https://example.org/schema.json; check-jsonschema --schemafile ./schema.json` |
| A vulnerability has been identified within Rancher where a cluster or node driver can be used to escape the chroot
jail and gain root access to the Rancher container itself. In
production environments, further privilege escalation is possible based
on living off the land within the Rancher container itself. For the test
and development environments, based on a –privileged Docker container,
it is possible to escape the Docker container and gain execution access
on the host system.
This issue affects rancher: from 2.7.0 before 2.7.16, from 2.8.0 before 2.8.9, from 2.9.0 before 2.9.3. |
| The Addressing GLPI plugin enables you to create IP reports for visualize IP addresses used and free on a given network.. Starting with 3.0.0 and before 3.0.3, a poor security check allows an unauthenticated attacker to determine whether data exists (by name) in GLPI. |
| The AirVantage platform is vulnerable to an unauthorized attacker registering previously unregistered
devices on the AirVantage platform when the owner has not disabled the AirVantage Management
Service on the devices or registered the device. This could enable an attacker to configure, manage,
and execute AT commands on an unsuspecting user’s devices. |
| In the Linux kernel, the following vulnerability has been resolved:
page_pool: always add GFP_NOWARN for ATOMIC allocations
Driver authors often forget to add GFP_NOWARN for page allocation
from the datapath. This is annoying to users as OOMs are a fact
of life, and we pretty much expect network Rx to hit page allocation
failures during OOM. Make page pool add GFP_NOWARN for ATOMIC allocations
by default. |
| rPGP is a pure Rust implementation of OpenPGP. Prior to 0.14.1, rPGP allows attackers to trigger resource exhaustion vulnerabilities in rpgp by providing crafted messages. This affects general message parsing and decryption with symmetric keys. |
| WiFi File Transfer 1.0.8 contains a persistent cross-site scripting vulnerability that allows remote attackers to inject malicious script codes through file and folder names. Attackers can exploit the web server's input validation weakness to execute arbitrary JavaScript when users preview infected file paths, potentially compromising user browser sessions. |
| sp-php-email-handler is a PHP package for handling contact form submissions. Messages sent using this script are vulnerable to abuse, as the script allows anybody to specify arbitrary email recipients and include user-provided content in confirmation emails. This could enable malicious actors to use your server to send spam, phishing emails, or other malicious content, potentially damaging your domain's reputation and leading to blacklisting by email providers. Patched in version 1.0.0 by removing user-provided content from confirmation emails. All pre-release versions (alpha and beta) are vulnerable to this issue and should not be used. There are no workarounds for this issue. Users must upgrade to version 1.0.0 to mitigate the vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix memory leak in smb3_fs_context_parse_param error path
Add proper cleanup of ctx->source and fc->source to the
cifs_parse_mount_err error handler. This ensures that memory allocated
for the source strings is correctly freed on all error paths, matching
the cleanup already performed in the success path by
smb3_cleanup_fs_context_contents().
Pointers are also set to NULL after freeing to prevent potential
double-free issues.
This change fixes a memory leak originally detected by syzbot. The
leak occurred when processing Opt_source mount options if an error
happened after ctx->source and fc->source were successfully
allocated but before the function completed.
The specific leak sequence was:
1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory
2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory
3. A subsequent error jumps to cifs_parse_mount_err
4. The old error handler freed passwords but not the source strings,
causing the memory to leak.
This issue was not addressed by commit e8c73eb7db0a ("cifs: client:
fix memory leak in smb3_fs_context_parse_param"), which only fixed
leaks from repeated fsconfig() calls but not this error path.
Patch updated with minor change suggested by kernel test robot |
| Ibexa Admin UI Bundle is all the necessary parts to run the Ibexa DXP Back Office interface. The Content name pattern is used to build Content names from one or more fields. An XSS vulnerability has been found in this mechanism. Content edit permission is required to exploit it. After the fix, any existing injected XSS will not run. This issue has been patched in version 4.6.14. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
