| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs
When shrinking the number of real tx queues,
netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush
qdiscs for queues which will no longer be used.
qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with
qdisc_lock(). However, for lockless qdiscs, the dequeue path is
serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so
qdisc_reset() can run concurrently with __qdisc_run() and free skbs
while they are still being dequeued, leading to UAF.
This can easily be reproduced on e.g. virtio-net by imposing heavy
traffic while frequently changing the number of queue pairs:
iperf3 -ub0 -c $peer -t 0 &
while :; do
ethtool -L eth0 combined 1
ethtool -L eth0 combined 2
done
With KASAN enabled, this leads to reports like:
BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760
...
Call Trace:
<TASK>
...
__qdisc_run+0x133f/0x1760
__dev_queue_xmit+0x248f/0x3550
ip_finish_output2+0xa42/0x2110
ip_output+0x1a7/0x410
ip_send_skb+0x2e6/0x480
udp_send_skb+0xb0a/0x1590
udp_sendmsg+0x13c9/0x1fc0
...
</TASK>
Allocated by task 1270 on cpu 5 at 44.558414s:
...
alloc_skb_with_frags+0x84/0x7c0
sock_alloc_send_pskb+0x69a/0x830
__ip_append_data+0x1b86/0x48c0
ip_make_skb+0x1e8/0x2b0
udp_sendmsg+0x13a6/0x1fc0
...
Freed by task 1306 on cpu 3 at 44.558445s:
...
kmem_cache_free+0x117/0x5e0
pfifo_fast_reset+0x14d/0x580
qdisc_reset+0x9e/0x5f0
netif_set_real_num_tx_queues+0x303/0x840
virtnet_set_channels+0x1bf/0x260 [virtio_net]
ethnl_set_channels+0x684/0xae0
ethnl_default_set_doit+0x31a/0x890
...
Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by
taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the
serialization model already used by dev_reset_queue().
Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state
reflects an empty queue, avoiding needless re-scheduling. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86: Move event pointer setup earlier in x86_pmu_enable()
A production AMD EPYC system crashed with a NULL pointer dereference
in the PMU NMI handler:
BUG: kernel NULL pointer dereference, address: 0000000000000198
RIP: x86_perf_event_update+0xc/0xa0
Call Trace:
<NMI>
amd_pmu_v2_handle_irq+0x1a6/0x390
perf_event_nmi_handler+0x24/0x40
The faulting instruction is `cmpq $0x0, 0x198(%rdi)` with RDI=0,
corresponding to the `if (unlikely(!hwc->event_base))` check in
x86_perf_event_update() where hwc = &event->hw and event is NULL.
drgn inspection of the vmcore on CPU 106 showed a mismatch between
cpuc->active_mask and cpuc->events[]:
active_mask: 0x1e (bits 1, 2, 3, 4)
events[1]: 0xff1100136cbd4f38 (valid)
events[2]: 0x0 (NULL, but active_mask bit 2 set)
events[3]: 0xff1100076fd2cf38 (valid)
events[4]: 0xff1100079e990a90 (valid)
The event that should occupy events[2] was found in event_list[2]
with hw.idx=2 and hw.state=0x0, confirming x86_pmu_start() had run
(which clears hw.state and sets active_mask) but events[2] was
never populated.
Another event (event_list[0]) had hw.state=0x7 (STOPPED|UPTODATE|ARCH),
showing it was stopped when the PMU rescheduled events, confirming the
throttle-then-reschedule sequence occurred.
The root cause is commit 7e772a93eb61 ("perf/x86: Fix NULL event access
and potential PEBS record loss") which moved the cpuc->events[idx]
assignment out of x86_pmu_start() and into step 2 of x86_pmu_enable(),
after the PERF_HES_ARCH check. This broke any path that calls
pmu->start() without going through x86_pmu_enable() -- specifically
the unthrottle path:
perf_adjust_freq_unthr_events()
-> perf_event_unthrottle_group()
-> perf_event_unthrottle()
-> event->pmu->start(event, 0)
-> x86_pmu_start() // sets active_mask but not events[]
The race sequence is:
1. A group of perf events overflows, triggering group throttle via
perf_event_throttle_group(). All events are stopped: active_mask
bits cleared, events[] preserved (x86_pmu_stop no longer clears
events[] after commit 7e772a93eb61).
2. While still throttled (PERF_HES_STOPPED), x86_pmu_enable() runs
due to other scheduling activity. Stopped events that need to
move counters get PERF_HES_ARCH set and events[old_idx] cleared.
In step 2 of x86_pmu_enable(), PERF_HES_ARCH causes these events
to be skipped -- events[new_idx] is never set.
3. The timer tick unthrottles the group via pmu->start(). Since
commit 7e772a93eb61 removed the events[] assignment from
x86_pmu_start(), active_mask[new_idx] is set but events[new_idx]
remains NULL.
4. A PMC overflow NMI fires. The handler iterates active counters,
finds active_mask[2] set, reads events[2] which is NULL, and
crashes dereferencing it.
Move the cpuc->events[hwc->idx] assignment in x86_pmu_enable() to
before the PERF_HES_ARCH check, so that events[] is populated even
for events that are not immediately started. This ensures the
unthrottle path via pmu->start() always finds a valid event pointer. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 38.8.6, 39.8.0, 40.7.0, and 41.0.0-beta.8, apps that register an asynchronous session.setPermissionRequestHandler() may be vulnerable to a use-after-free when handling fullscreen, pointer-lock, or keyboard-lock permission requests. If the requesting frame navigates or the window closes while the permission handler is pending, invoking the stored callback dereferences freed memory, which may lead to a crash or memory corruption. Apps that do not set a permission request handler, or whose handler responds synchronously, are not affected. This issue has been patched in versions 38.8.6, 39.8.0, 40.7.0, and 41.0.0-beta.8. |
| A race condition existed in nsHttpTransaction that could have been exploited to cause memory corruption, potentially leading to an exploitable condition. This vulnerability was fixed in Firefox 137.0.2. |
| Race condition in signal handling routine in ftpd, allowing read/write arbitrary files. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation. |
| A race condition vulnerability was discovered in how signals are handled by OpenSSH's server (sshd). If a remote attacker does not authenticate within a set time period, then sshd's SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server. |
| Race condition, use-after-free in the Graphics: WebRender component. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. |
| Strapi is an open source headless content management system. Strapi versions prior to 5.20.0 contain a CORS misconfiguration vulnerability in default installations. By default, Strapi reflects the value of the Origin header back in the Access-Control-Allow-Origin response header without proper validation or whitelisting. This allows an attacker-controlled site to send credentialed requests to the Strapi backend. An attacker can exploit this by hosting a malicious site on a different origin (e.g., different port) and sending requests with credentials to the Strapi API. The vulnerability is fixed in version 5.20.0. No known workarounds exist. |
| When manipulating user events in nested loops while opening a document through script, it is possible to trigger a potentially exploitable crash due to poor event handling. This vulnerability affects Firefox < 63, Firefox ESR < 60.3, and Thunderbird < 60.3. |
| In the Linux kernel, the following vulnerability has been resolved:
um: Add winch to winch_handlers before registering winch IRQ
Registering a winch IRQ is racy, an interrupt may occur before the winch is
added to the winch_handlers list.
If that happens, register_winch_irq() adds to that list a winch that is
scheduled to be (or has already been) freed, causing a panic later in
winch_cleanup().
Avoid the race by adding the winch to the winch_handlers list before
registering the IRQ, and rolling back if um_request_irq() fails. |
| In Eclipse OpenJ9 before version 0.41.0, the JVM can be forced into an infinite busy hang on a spinlock or a segmentation fault if a shutdown signal (SIGTERM, SIGINT or SIGHUP) is received before the JVM has finished initializing.
|
| In the Linux kernel, the following vulnerability has been resolved:
quota: flush quota_release_work upon quota writeback
One of the paths quota writeback is called from is:
freeze_super()
sync_filesystem()
ext4_sync_fs()
dquot_writeback_dquots()
Since we currently don't always flush the quota_release_work queue in
this path, we can end up with the following race:
1. dquot are added to releasing_dquots list during regular operations.
2. FS Freeze starts, however, this does not flush the quota_release_work queue.
3. Freeze completes.
4. Kernel eventually tries to flush the workqueue while FS is frozen which
hits a WARN_ON since transaction gets started during frozen state:
ext4_journal_check_start+0x28/0x110 [ext4] (unreliable)
__ext4_journal_start_sb+0x64/0x1c0 [ext4]
ext4_release_dquot+0x90/0x1d0 [ext4]
quota_release_workfn+0x43c/0x4d0
Which is the following line:
WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE);
Which ultimately results in generic/390 failing due to dmesg
noise. This was detected on powerpc machine 15 cores.
To avoid this, make sure to flush the workqueue during
dquot_writeback_dquots() so we dont have any pending workitems after
freeze. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: Use set_bit() and test_bit() at worker->flags
Utilize set_bit() and test_bit() on worker->flags within io_uring/io-wq
to address potential data races.
The structure io_worker->flags may be accessed through various data
paths, leading to concurrency issues. When KCSAN is enabled, it reveals
data races occurring in io_worker_handle_work and
io_wq_activate_free_worker functions.
BUG: KCSAN: data-race in io_worker_handle_work / io_wq_activate_free_worker
write to 0xffff8885c4246404 of 4 bytes by task 49071 on cpu 28:
io_worker_handle_work (io_uring/io-wq.c:434 io_uring/io-wq.c:569)
io_wq_worker (io_uring/io-wq.c:?)
<snip>
read to 0xffff8885c4246404 of 4 bytes by task 49024 on cpu 5:
io_wq_activate_free_worker (io_uring/io-wq.c:? io_uring/io-wq.c:285)
io_wq_enqueue (io_uring/io-wq.c:947)
io_queue_iowq (io_uring/io_uring.c:524)
io_req_task_submit (io_uring/io_uring.c:1511)
io_handle_tw_list (io_uring/io_uring.c:1198)
<snip>
Line numbers against commit 18daea77cca6 ("Merge tag 'for-linus' of
git://git.kernel.org/pub/scm/virt/kvm/kvm").
These races involve writes and reads to the same memory location by
different tasks running on different CPUs. To mitigate this, refactor
the code to use atomic operations such as set_bit(), test_bit(), and
clear_bit() instead of basic "and" and "or" operations. This ensures
thread-safe manipulation of worker flags.
Also, move `create_index` to avoid holes in the structure. |
| The signal handler implementations in socat before 1.7.3.0 and 2.0.0-b8 allow remote attackers to cause a denial of service (process freeze or crash). |
| GNOME Display Manager (gdm) before 3.18.2 allows physically proximate attackers to bypass the lock screen by holding the Escape key. |
| Signal Handler Race Condition vulnerability in Mitsubishi Electric India GC-ENET-COM whose first 2 digits of 11-digit serial number of unit are "16" allows a remote unauthenticated attacker to cause a denial-of-service (DoS) condition in Ethernet communication by sending a large number of specially crafted packets to any UDP port when GC-ENET-COM is configured as a Modbus TCP Server. The communication resumes only when the power of the main unit is turned off and on or when the GC-ENET-COM is hot-swapped from the main unit.
|
| A signal handler in sshd(8) may call a logging function that is not async-signal-safe. The signal handler is invoked when a client does not authenticate within the LoginGraceTime seconds (120 by default). This signal handler executes in the context of the sshd(8)'s privileged code, which is not sandboxed and runs with full root privileges.
This issue is another instance of the problem in CVE-2024-6387 addressed by FreeBSD-SA-24:04.openssh. The faulty code in this case is from the integration of blacklistd in OpenSSH in FreeBSD.
As a result of calling functions that are not async-signal-safe in the privileged sshd(8) context, a race condition exists that a determined attacker may be able to exploit to allow an unauthenticated remote code execution as root. |
| It was found that the issue for security flaw CVE-2019-3805 appeared again in a further version of JBoss Enterprise Application Platform - Continuous Delivery (EAP-CD) introducing regression. An attacker could exploit this by modifying the PID file in /var/run/jboss-eap/ allowing the init.d script to terminate any process as root. |
| A flaw was discovered in wildfly versions up to 16.0.0.Final that would allow local users who are able to execute init.d script to terminate arbitrary processes on the system. An attacker could exploit this by modifying the PID file in /var/run/jboss-eap/ allowing the init.d script to terminate any process as root. |
