| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: refresh hdr pointer before ioam6_event()
Reported by Sashiko:
In ipv6_hop_ioam(), the hdr pointer is initialized to point into the
skb's linear data buffer. Later, the code calls skb_ensure_writable(),
which might reallocate the buffer:
if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len))
goto drop;
/* Trace pointer may have changed */
trace = (struct ioam6_trace_hdr *)(skb_network_header(skb)
+ optoff + sizeof(*hdr));
ioam6_fill_trace_data(skb, ns, trace, true);
ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev),
GFP_ATOMIC, (void *)trace, hdr->opt_len - 2);
If the skb is cloned or lacks sufficient linear headroom,
skb_ensure_writable() will invoke pskb_expand_head(), which reallocates
the skb's data buffer and frees the old one, invalidating pointers to
it. While the code recalculates the trace pointer immediately after the
call to skb_ensure_writable(), it fails to recalculate the hdr pointer.
This patch fixes the above by recalculating the hdr pointer before
passing hdr->opt_len to ioam6_event(), so that we avoid any UaF. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory: fix spurious warning when unmapping device-private/exclusive pages
Device private and exclusive entries are only supported for anonymous
folios. This condition is tested in __migrate_device_pages() and
make_device_exclusive() using folio_test_anon(). However the unmap path
tests this assumption using vma_is_anonymous().
This is wrong because whilst anonymous VMAs can only contain folios where
folio_test_anon() is true the opposite relation does not hold. A folio
for which folio_test_anon() is true does not imply vma_is_anonymous() is
true. Such a condition can occur if for example a folio is part of a
private filebacked mapping.
In this case vma_is_anonymous() is false as the mapping is filebacked, but
folio_test_anon() may be true, thus permitting devices to migrate the
folio to device private memory. This can lead to the following spurious
warnings during process teardown:
[ 772.737706] ------------[ cut here ]------------
[ 772.739201] WARNING: mm/memory.c:1754 at unmap_page_range.cold+0x26/0x18a, CPU#17: hmm-tests/2041
[ 772.742050] Modules linked in: test_hmm nvidia_uvm(O) nvidia(O)
[ 772.743959] CPU: 17 UID: 0 PID: 2041 Comm: hmm-tests Tainted: G W O 7.0.0+ #387 PREEMPT(full)
[ 772.747104] Tainted: [W]=WARN, [O]=OOT_MODULE
[ 772.748509] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 772.752117] RIP: 0010:unmap_page_range.cold+0x26/0x18a
[ 772.753780] Code: 7e fe ff ff 48 89 4c 24 78 4c 89 44 24 38 e8 f2 ff b1 00 48 8b 4c 24 78 4c 8b 44 24 38 48 8b 44 24 18 48 83 78 48 00 74 04 90 <0f> 0b 90 48 89 ca b8 ff ff 37 00 48 c1 ea 03 48 c1 e0 2a 80 3c 02
[ 772.759602] RSP: 0018:ffff888112607550 EFLAGS: 00010286
[ 772.761310] RAX: ffff88811bbf4dc0 RBX: dffffc0000000000 RCX: ffffea03e9bfffd8
[ 772.763583] RDX: 1ffff1102377e9c1 RSI: 0000000000000008 RDI: ffff88811bbf4e08
[ 772.765914] RBP: 0000000000000006 R08: ffff8881059f7448 R09: ffffed10224c0e68
[ 772.768184] R10: ffff888112607347 R11: 0000000000000001 R12: 0000000000000001
[ 772.770461] R13: ffffea03e9bfffc0 R14: ffff888112607908 R15: ffffea03e9bfffc0
[ 772.772782] FS: 00007f327caa2780(0000) GS:ffff888427b7d000(0000) knlGS:0000000000000000
[ 772.775328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 772.777187] CR2: 00007f327ca89000 CR3: 00000001994d5000 CR4: 00000000000006f0
[ 772.779135] Call Trace:
[ 772.779792] <TASK>
[ 772.780317] ? dmirror_interval_invalidate+0x1a3/0x290 [test_hmm]
[ 772.781873] ? vm_normal_page_pud+0x2b0/0x2b0
[ 772.782992] ? __rwlock_init+0x150/0x150
[ 772.784006] ? lock_release+0x216/0x2b0
[ 772.785008] ? __mmu_notifier_invalidate_range_start+0x505/0x6e0
[ 772.786522] ? lock_release+0x216/0x2b0
[ 772.787498] ? unmap_single_vma+0xb6/0x210
[ 772.788573] unmap_vmas+0x27d/0x520
[ 772.789506] ? unmap_single_vma+0x210/0x210
[ 772.790607] ? mas_update_gap.part.0+0x620/0x620
[ 772.791834] unmap_region+0x19e/0x350
[ 772.792769] ? remove_vma+0x130/0x130
[ 772.793684] ? mas_alloc_nodes+0x1f2/0x300
[ 772.794730] vms_complete_munmap_vmas+0x8c1/0xe20
[ 772.795926] ? unmap_region+0x350/0x350
[ 772.796917] do_vmi_align_munmap+0x36a/0x4e0
[ 772.798018] ? lock_release+0x216/0x2b0
[ 772.799024] ? vma_shrink+0x620/0x620
[ 772.799983] do_vmi_munmap+0x150/0x2c0
[ 772.800939] __vm_munmap+0x161/0x2c0
[ 772.801872] ? expand_downwards+0xd60/0xd60
[ 772.802948] ? clockevents_program_event+0x1ef/0x540
[ 772.804217] ? lock_release+0x216/0x2b0
[ 772.805158] __x64_sys_munmap+0x59/0x80
[ 772.805776] do_syscall_64+0xfc/0x670
[ 772.806336] ? irqentry_exit+0xda/0x580
[ 772.806976] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 772.807772] RIP: 0033:0x7f327cbb2717
[ 772.808323] Code: 73 01 c3 48 8b 0d f9 76 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 0b 00 00 00 0f 05 <48> 3d 01 f0 ff
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free
__GFP_ZEROTAGS semantics are currently a bit weird, but effectively this
flag is only ever set alongside __GFP_ZERO and __GFP_SKIP_KASAN.
If we run with init_on_free, we will zero out pages during
__free_pages_prepare(), to skip zeroing on the allocation path.
However, when allocating with __GFP_ZEROTAG set, post_alloc_hook() will
consequently not only skip clearing page content, but also skip clearing
tag memory.
Not clearing tags through __GFP_ZEROTAGS is irrelevant for most pages that
will get mapped to user space through set_pte_at() later: set_pte_at() and
friends will detect that the tags have not been initialized yet
(PG_mte_tagged not set), and initialize them.
However, for the huge zero folio, which will be mapped through a PMD
marked as special, this initialization will not be performed, ending up
exposing whatever tags were still set for the pages.
The docs (Documentation/arch/arm64/memory-tagging-extension.rst) state
that allocation tags are set to 0 when a page is first mapped to user
space. That no longer holds with the huge zero folio when init_on_free is
enabled.
Fix it by decoupling __GFP_ZEROTAGS from __GFP_ZERO, passing to
tag_clear_highpages() whether we want to also clear page content.
Invert the meaning of the tag_clear_highpages() return value to have
clearer semantics.
Reproduced with the huge zero folio by modifying the check_buffer_fill
arm64/mte selftest to use a 2 MiB area, after making sure that pages have
a non-0 tag set when freeing (note that, during boot, we will not actually
initialize tags, but only set KASAN_TAG_KERNEL in the page flags).
$ ./check_buffer_fill
1..20
...
not ok 17 Check initial tags with private mapping, sync error mode and mmap memory
not ok 18 Check initial tags with private mapping, sync error mode and mmap/mprotect memory
...
This code needs more cleanups; we'll tackle that next, like
decoupling __GFP_ZEROTAGS from __GFP_SKIP_KASAN.
[[email protected]: s/__GPF_ZERO/__GFP_ZERO/, per David] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page
When check_stable_address_space() fails after the PMD spinlock has
been acquired via pmd_lock(), the code jumps directly to the abort
label, bypassing the spin_unlock() call in unlock_abort. This causes
the PMD spinlock to be permanently held, leading to a deadlock.
Change the goto target from abort to unlock_abort to ensure the
spinlock is always released on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: drop ISO_END frames received without prior ISO_START
ISO data PDUs carry a packet-boundary flag indicating START, CONT, END
or SINGLE. The ISO_CONT branch of iso_recv() guards against a missing
ISO_START by checking conn->rx_len before touching conn->rx_skb, but
ISO_END does not.
If a peer sends an ISO_END as the first packet on a fresh ISO
connection, conn->rx_skb is still NULL and conn->rx_len is zero, so
skb_put(conn->rx_skb, ...) dereferences NULL and oopses. For BIS,
where receivers sync to a broadcaster without pairing, any broadcaster
on the air can trigger this.
Mirror the ISO_CONT check at the top of ISO_END so a stray end fragment
is logged and dropped instead of crashing the host. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: ecred_reconfigure: send packed pdu, not stack pointer
Commit 1c08108f3014 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end
warnings") converted the on-stack request PDU in l2cap_ecred_reconfigure()
from an explicit packed struct to DEFINE_RAW_FLEX(), but did not adjust the
size and source-pointer arguments to l2cap_send_cmd():
- struct {
- struct l2cap_ecred_reconf_req req;
- __le16 scid;
- } pdu;
+ DEFINE_RAW_FLEX(struct l2cap_ecred_reconf_req, pdu, scid, 1);
...
l2cap_send_cmd(conn, chan->ident, L2CAP_ECRED_RECONF_REQ,
sizeof(pdu), &pdu);
After the conversion, DEFINE_RAW_FLEX() expands to declare an anonymous
union pdu_u plus a local pointer "pdu" pointing at it. Therefore:
- sizeof(pdu) is now sizeof(struct l2cap_ecred_reconf_req *) = 8 on
64-bit (4 on 32-bit), not the 6 bytes of (mtu, mps, scid[1]).
- &pdu is the address of the local pointer's stack storage, not the
address of the request payload.
l2cap_send_cmd() forwards (data, count) to l2cap_build_cmd(), which calls
skb_put_data(skb, data, count). The L2CAP_ECRED_RECONFIGURE_REQ packet
body therefore contains 8 bytes copied from the kernel stack starting at
&pdu -- the 8 bytes overlap the pdu pointer's value, leaking a kernel
stack address to the paired Bluetooth peer. The intended (mtu, mps, scid)
fields are not transmitted at all, so the peer rejects the request as
malformed and the L2CAP_ECRED_RECONFIGURE feature itself has been broken
for the local-side initiator since the introducing commit landed.
The sibling site l2cap_ecred_conn_req() in the same commit was converted
correctly (sizeof(*pdu) + len, pdu); only this site was missed.
Restore the original semantics: pass the full flex-struct size via
struct_size(pdu, scid, 1) and the pdu pointer (the struct address) as
the source.
Validated on a stock 7.0-based host kernel via the real call path:
setsockopt(SOL_BLUETOOTH, BT_RCVMTU, ...) on a BT_CONNECTED
L2CAP_MODE_EXT_FLOWCTL socket emits an L2CAP_ECRED_RECONFIGURE_REQ
whose body is 8 bytes (the on-stack pdu local's value) rather than
the expected 6. Three captures from fresh socket / fresh hciemu peer
on the same host -- low bytes vary per call, high 0xffff confirms a
kernel virtual address (KASLR-randomised stack slot, not a fixed
string):
RECONF_REQ body (ident=0x02 len=8): 42 fb 54 af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): 52 3d 2e af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): b2 fc 5b af 0e ca ff ff
After this patch the body is 6 bytes carrying the expected
little-endian (mtu, mps, scid). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate Add Extended Advertising Data length
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: keep RBUF EEE/PM disabled
Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX
path on GENET hardware once MAC EEE becomes active. RX traffic stops
flowing while the link stays up and the usual descriptor/RX error
counters remain quiet. In that state the MAC still accepts frames
(rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to
DMA, so rx_packets is no longer incremented at the netdev level. On
some boards the corruption ends up as a paging fault in
skb_release_data via bcmgenet_rx_poll on an LPI exit.
Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian
Fainelli on an internal Broadcom 4908-family board with the same crash
signature. RBUF_PM_EN is not publicly documented.
This shows up more often now that phy_support_eee() enables EEE by
default, but it also affects older kernels as soon as TX LPI is
turned on via ethtool, so it is not specific to recent changes.
Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so
the bits stay off across resets. UMAC and TBUF setup is left alone so
TX-side EEE keeps working. |
| In the Linux kernel, the following vulnerability has been resolved:
net: devmem: reject dma-buf bind with non-page-aligned size or SG length
net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be
PAGE_SIZE multiples without checking:
- tx_vec is sized dmabuf->size / PAGE_SIZE, and
net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size
before indexing tx_vec[virt_addr / PAGE_SIZE]. With size =
N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base =
N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past.
- owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner()
covers the full byte len, so a non-page-multiple non-final sg
desyncs num_niovs from the gen_pool region for every later sg, on
both RX and TX.
dma-buf does not require page-aligned sizes, so the bind path has to
enforce what its own indexing assumes. Reject both with -EINVAL.
The size check is TX-only (only tx_vec is sized off dmabuf->size); the
SG-length check covers both directions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: defer node table free until after RCU readers
HSR node-list and node-status generic-netlink operations run under
rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and
hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table
with plain list_del() and frees each node immediately.
That lets a generic-netlink reader hold a struct hsr_node pointer across
hsr_dellink(). In a KASAN build, widening the reader window after
hsr_get_next_node() obtains the node reproduces a slab-use-after-free
when the reader copies node->macaddress_A; the freeing stack is
hsr_del_nodes() from hsr_dellink().
Use list_del_rcu() and defer the free through the existing
hsr_free_node_rcu() callback. This matches the lifetime rule used by the
HSR prune paths, which already delete nodes with list_del_rcu() and
call_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix use-after-free in mlx5e_tx_reporter_timeout_recover
mlx5e_tx_reporter_timeout_recover() accesses sq->netdev after
mlx5e_safe_reopen_channels() has torn down and freed the channel (and
its embedded SQs). Replace the three sq->netdev references with
priv->netdev which is safe because priv outlives channel teardown.
The netdev_err() call already used priv->netdev for this reason; make
the trylock/unlock and health_channel_eq_recover calls consistent.
This fixes the following KASAN splat:
BUG: KASAN: use-after-free in mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core]
Read of size 8 at addr ffff889860ed0b28 by task kworker/u113:2/5277
Call Trace:
mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core]
devlink_health_reporter_recover+0xa2/0x150
devlink_health_report+0x254/0x7c0
mlx5e_reporter_tx_timeout+0x297/0x380 [mlx5_core]
mlx5e_tx_timeout_work+0x109/0x170 [mlx5_core]
process_one_work+0x677/0xf20
worker_thread+0x51f/0xd90
kthread+0x3a5/0x810
ret_from_fork+0x208/0x400
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ifb: report ethtool stats over num_tx_queues
ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues
entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB
per-queue RX and TX stats live in those entries: ifb_xmit() updates
txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates
txp->tx_stats, and ifb_stats64() aggregates both over
dev->num_tx_queues.
The ethtool stats callbacks instead size and walk the per-queue
stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With
an asymmetric device where the RX queue count exceeds the TX queue
count, for example:
ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb
ethtool -S ifb10
ifb_get_ethtool_stats() indexes past the tx_private allocation and
copies adjacent slab data through ETHTOOL_GSTATS.
Use dev->num_tx_queues consistently for the stats strings, the
stats count, and the stats data walks. This reports one RX stats
group and one TX stats group for each backing ifb_q_private entry,
which is the queue set IFB can actually populate.
Reproduced under UML+KASAN at v7.1-rc2:
BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae
Read of size 8 at addr 0000000062dbd228 by task ethtool/36
ifb_fill_stats_data+0x3c/0xae
ifb_get_ethtool_stats+0xc0/0x129
__dev_ethtool+0x1ca5/0x363c
dev_ethtool+0x123/0x1b3
dev_ioctl+0x56c/0x744
sock_do_ioctl+0x15f/0x1b2
sock_ioctl+0x4d5/0x50a
sys_ioctl+0xd8b/0xde9
With the patch applied, the same UML+KASAN repro is silent and
ethtool -S ifb10 reports only the stats backed by the single
allocated tx_private entry. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethtool: fix NULL pointer dereference in phy_reply_size
In phy_prepare_data(), several strings such as 'name', 'drvname',
'upstream_sfp_name', and 'downstream_sfp_name' are allocated using
kstrdup(). However, these allocations were not checked for failure.
If kstrdup() fails for 'name', it returns NULL while the function
continues. This leads to a kernel NULL pointer dereference and panic
later in phy_reply_size() when it unconditionally calls strlen() on
the NULL pointer.
While other strings like 'upstream_sfp_name' might be checked before
access in certain code paths, failing to handle these allocations
consistently can lead to incomplete data reporting or hidden bugs.
Fix this by adding proper NULL checks for all kstrdup() calls in
phy_prepare_data() and implement a centralized error handling path
using goto labels to ensure all previously allocated resources are
freed on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: use list_del_rcu in l2tp_session_unhash
An unprivileged local user can pin a host CPU indefinitely in
l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on
L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and
L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take
GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace
suffices; on any host that has l2tp_core loaded the trigger is
reachable from a standard `unshare -Urn` sandbox.
l2tp_session_unhash() removes a session from tunnel->session_list
with list_del_init(), but that list is walked by
l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under
rcu_read_lock_bh(). list_del_init() leaves the deleted entry's
next/prev self-pointing; a reader that has loaded the entry and
then advances pos->list.next reads &session->list, container_of()s
back to the same session, and list_for_each_entry_rcu() never
reaches the list head. The CPU stays in strcmp() inside the
walker, with BH and preemption disabled, so RCU grace periods on
the host stall behind it and the wedged thread cannot be killed
(SIGKILL is delivered on syscall return).
Use list_del_rcu() to match the existing list_add_rcu() in
l2tp_session_register(); the deleted session remains visible to
in-flight walkers with consistent next/prev pointers until
kfree_rcu() in l2tp_session_free() releases it. tunnel->session_list
has exactly one list_del_init() call site; the list_del_init
(&session->clist) at l2tp_core.c:533 operates on the per-collision
list, which is not walked under RCU. list_empty(&session->list) is
not used anywhere in net/l2tp/ after the unhash point, so dropping
the post-delete self-init is safe; the fix has no userspace-visible
behavior change. |
| In the Linux kernel, the following vulnerability has been resolved:
qed: fix double free in qed_cxt_tables_alloc()
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime reproduction was not attempted because exercising the failing
allocation path requires device-specific setup. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: add NULL check for idev in ipv6_hop_ioam()
Reported by Sashiko:
The function ipv6_hop_ioam() accesses
__in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned
idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr
via RCU, __in6_dev_get() can return NULL during interface teardown, which
could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop
option.
Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix UAF when peer resets connection during handshake
vmci_transport_recv_connecting_server() returned err = 0 for a peer
RST in its default switch arm:
err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL;
That made vmci_transport_recv_listen() skip vsock_remove_pending(),
leaving the pending socket on the listener's pending_links with
sk_state = TCP_CLOSE while destroy: still dropped the explicit
reference taken before schedule_delayed_work().
One second later vsock_pending_work() observed is_pending=true and
performed full cleanup: vsock_remove_pending() then the two trailing
sock_put(sk) calls -- the first reached refcount 0 and __sk_freed
the socket, and the second wrote into the freed object:
BUG: KASAN: slab-use-after-free in refcount_warn_saturate
Write of size 4 at addr ffff88800b1cac80 by task kworker
Workqueue: events vsock_pending_work
Treat peer RST like any other unexpected packet type (err = -EINVAL).
All destroy: arms now return err < 0, so vmci_transport_recv_listen()
removes pending from pending_links synchronously and
vsock_pending_work() takes the is_pending=false / !rejected branch,
dropping only its own work reference. This also closes the
multi-packet race Sashiko reported on v2: pending is removed from
the list before any subsequent packet can find it.
The pre-existing sk_acceptq_removed() gap on the err < 0 path of
vmci_transport_recv_listen() that Sashiko also noted is not
introduced or changed by this patch.
Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: raw: reject IP_HDRINCL packets with ihl < 5
raw_send_hdrinc() validates that the caller-supplied IPv4 header
fits within the message length:
iphlen = iph->ihl * 4;
err = -EINVAL;
if (iphlen > length)
goto error_free;
if (iphlen >= sizeof(*iph)) {
/* fix up saddr, tot_len, id, csum, transport_header */
}
It does not, however, reject ihl < 5. For such a packet the
"if (iphlen >= sizeof(*iph))" branch is skipped, leaving the
crafted iphdr untouched, but the packet is still handed to
__ip_local_out() and onward. Downstream consumers that read
iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in
particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4
and passes the (signed-int-negative, then cast to size_t)
result to memcpy(), producing an OOB access of length close to
SIZE_MAX and a host kernel panic.
An IPv4 header with ihl < 5 is malformed by definition (RFC 791:
"Internet Header Length is the length of the internet header in
32 bit words ... Note that the minimum value for a correct header
is 5."). The kernel should not be willing to inject such a
packet into its own output path.
Reject "iphlen < sizeof(*iph)" alongside the existing
"iphlen > length" check. This matches the principle that locally
constructed packets that re-enter the IP stack must pass the same
basic sanity tests that a foreign packet would be subjected to.
Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around
the fixup branch becomes redundant; left in place to keep the
patch minimal and backport-friendly. A follow-up can unwrap it.
Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket
message is big enough to hold an IP header") ensures the message
buffer is large enough to hold an iphdr, but does not constrain
the self-reported iph->ihl.
Reachability: the malformed packet source is any caller with
CAP_NET_RAW, including an unprivileged process in a user+net
namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH
crash also requires a matching xfrm AH policy on the outgoing
route; a container granted CAP_NET_ADMIN can install that state
and policy in its netns. Loopback bypasses xfrm_output, so the
trigger uses a real netdev.
Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with
memcpy_orig at the crash site. Same shape reproduces inside a
rootless Docker container with --cap-add NET_ADMIN on a stock
distro kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: fix use-after-free in VEPA multicast source pruning
ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's
own address (VEPA multicast workaround) by freeing the skb and
continuing to the next descriptor:
dev_kfree_skb_irq(skb);
continue;
The skb pointer is declared outside the while loop and persists across
iterations. Because the continue skips the "skb = NULL" reset at the
bottom of the loop, the next iteration enters the "else if (skb)" path
and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing
skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context.
The sibling driver iavf already handles this correctly by nulling the
pointer before continuing. Apply the same pattern here.
I do not have ixgbevf hardware; the bug was found by static analysis
(scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool
corroboration with the highest score in the scan). The UAF was confirmed
under KASAN by loading a test module that reproduces the exact code
pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags):
BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000
Read of size 8 at addr 000000006163ae78 by task insmod/30
freed 208-byte region [000000006163adc0, 000000006163ae90)
QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF
driver does not include the VEPA source pruning path, so a full
end-to-end reproduction with emulated hardware was not possible. |
