| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted certificate that contains Uniform Resource Identifier (URI) or Service (SRV) Subject Alternative Names (SANs). This could cause the certificate validation process to incorrectly fall back to checking DNS hostnames against the Common Name (CN), potentially allowing the attacker to spoof legitimate services or intercept sensitive information. |
| A flaw was found in gnutls. This vulnerability occurs because permitted name constraints were incorrectly ignored when previous Certificate Authorities (CAs) only had excluded name constraints. A remote attacker could exploit this to bypass critical name constraint checks during certificate validation. This bypass could lead to the acceptance of invalid certificates, potentially enabling spoofing or man-in-the-middle attacks against affected systems. |
| A flaw was found in libgnutls. A remote attacker, by sending an extremely short premaster secret during an RSA key exchange to a server using an RSA key backed by a PKCS#11 token, could trigger a short heap overread. This memory corruption vulnerability could lead to information disclosure. |
| A flaw was found in gnutls. This vulnerability occurs because gnutls performs case-sensitive comparisons of `nameConstraints` labels, specifically for `dNSName` (DNS) or `rfc822Name` (email) constraints within `excludedSubtrees` or `permittedSubtrees`. A remote attacker can exploit this by crafting a leaf certificate with casing differences in the Subject Alternative Name (SAN), leading to a policy bypass where a certificate that should be rejected is instead accepted. This could result in unauthorized access or information disclosure. |
| A flaw was found in gnutls. An off-by-one error exists in the PKCS#12 bag element bounds check. This vulnerability allows an remote attacker to write past the internal array of a PKCS#12 bag when appending to a bag that already contains 32 elements. This memory corruption could lead to a denial of service (DoS) or potentially other unspecified impacts. |
| A flaw was found in GnuTLS. The `gnutls_pkcs11_token_set_pin` function, used for changing the Security Officer PIN, can lead to a use-after-free vulnerability. This occurs when an attacker attempts to change the PIN with a NULL old PIN for a token that lacks a protected authentication path. |
| A security flaw has been discovered in geex-arts django-jet up to 1.0.8. This impacts an unknown function of the component OAuth Credential Revoke Handler. Performing a manipulation results in missing authorization. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was found in 1Panel-dev CordysCRM up to 1.4.1. This issue affects some unknown processing of the file backend/crm/src/main/java/cn/cordys/crm/integration/sso/service/TokenService.java of the component Third Party Endpoint. Performing a manipulation of the argument mkAddress results in server-side request forgery. The attack may be initiated remotely. The exploit has been made public and could be used. The project closed the issue report, stating that this is not the official way to report a security vulnerability. |
| A vulnerability was detected in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /edit_schoolyr.php. Performing a manipulation of the argument ID results in sql injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. |
| A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service. |
| A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process. |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| The affected product accepts user-supplied input within a URL parameter without enforcing expected sanitization or encoding before rendering it within the response. This condition allows for the injection of malicious JavaScript payloads.
An attacker can leverage this vulnerability to cause the user's browser to redirect to a malicious website, modify the user interface of the webpage, or retrieve sensitive information from the browser. However, the impact is mitigated for session hijacking as all session-related sensitive cookies are protected by the httpOnly flag. |
| A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic. |
| Net::BitTorrent versions before 2.1.0 for Perl generate the MSE Diffie-Hellman private key with a non-cryptographic PRNG.
The MSE (Message Stream Encryption) handshake derives its 160-bit Diffie-Hellman private key from Perl's rand(), a non-cryptographic drand48-class generator seeded once per process, in KeyExchange.pm. The shared secret and the RC4 keys derived from it (the SHA-1 of "keyA" or "keyB", the shared secret, and the infohash) therefore depend entirely on a predictable PRNG. The same handshake sends, in cleartext, random padding drawn from the same rand() sequence in _random_pad, immediately after the public key and the private-key draw.
A passive observer of the handshake recovers the PRNG state from the cleartext padding, reconstructs the private key, computes the shared secret from the peer's public key on the wire, derives the RC4 keys, and decrypts the connection, defeating the passive-observation obfuscation MSE provides. |
| Net::BitTorrent versions through 2.1.0 for Perl allow remote memory exhaustion via deeply nested bencoded input.
bdecode recurses once per nested list or dictionary level with no depth cap, and each recursive call receives the remaining buffer by value while the list and dictionary branches capture the whole remainder, so every live recursion frame keeps its own copy of the shrinking buffer (O(N^2) bytes for an N-deep input). The decoder runs on every untrusted bencode source: .torrent files, BEP09 metadata fetched from peers, DHT messages, and tracker responses.
A bencoded input of roughly 150,000 nested lists (about 150 KB on the wire) drives multi-gigabyte peak memory, so one short message from any peer, or one crafted .torrent file or magnet link, terminates the client. |
| Net::BitTorrent versions through 2.1.0 for Perl allow remote memory exhaustion via an uncapped peer-wire message-length prefix.
The peer-wire framing in _process_messages trusts the 4-byte length prefix sent by a connected peer with no upper bound, while receive_data appends every inbound byte to the input buffer. A peer announces a length prefix of up to about 4 GiB and then streams bytes; the decoder waits until the buffer holds the full message before processing it, so the buffer grows without limit.
Peer connections are unauthenticated, so any peer in the swarm exhausts the downloading process's memory. The largest legitimate message is a 16 KiB piece block, so any announced length far above that is anomalous. |
| Net::BitTorrent versions before 2.1.0 for Perl write files outside the download directory via path traversal in peer-supplied metadata.
Net::BitTorrent validates file path components only on the .torrent-file ingest path. The peer and magnet metadata path (_on_metadata_received, reached from the BEP09 ut_metadata extension) passes attacker-supplied file names straight to Storage::add_file and Storage::_parse_file_tree, where Path::Tiny's child() does not collapse "..". A v2 file tree key, a v1 files[].path element, or a single-file name containing ".." segments therefore resolves outside the download directory.
Because the peer also controls the piece hashes and the served bytes, content verification passes, so a malicious magnet or peer writes attacker-chosen content to an attacker-chosen path on the downloading host. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
On old devices such as 7265D, rates are still encoded in version 1
format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but
rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.)
While introducing v3 rates, I changed the driver from internally
handling v1 rates and converting to v2, to internally handling v3
and converting to v1 or v2 according to the firmware. I accordingly
changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer
have different values for different APIs. This was correct.
However, I later reverted this part of the change, because it was
reported that I had broken beacon rates, causing a FW assert/crash.
This caused TX_CMD rates to be set incorrectly, potentially causing
a warning when reported back from the device as having been used.
Fix this (hopefully correctly now) by handling beacon rates in the
TX_CMD that's embedded in the beacon template command separately.
Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate
index, not PLCP value, fixing the real TX_CMD. |
