| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ardupilot through Plane-4.6.3 was found to contain an out-of-bounds read issue in libraries/GCS_MAVLink/GCS_serial_control.cpp in GCS_MAVLINK::handle_serial_control(). |
| mrubyc through release3.4.1 was found to contain an out-of-bounds read in builtin missing-method lookup inside mrbc_find_method(). |
| Signed to Unsigned Conversion Error and Out-of-bounds Write vulnerability in Erlang OTP erts allows an attacker who can supply a crafted Erlang external term format (ETF) binary to binary_to_term/1 to corrupt the BEAM heap pointer and crash the virtual machine.
When decoding a LARGE_TUPLE_EXT term, the validation pass decoded_size() in erts/emulator/beam/external.c reads the 32-bit arity field as unsigned (get_uint32()), while the decode pass dec_term() reads the same field as a signed 32-bit integer (get_int32()) into an int. An arity wire value of 0x80000000 passes validation as 2147483648 but decodes as -2147483648, so the subsequent hp += n moves the heap allocation pointer backward. Neither pass enforces the runtime tuple-arity limit MAX_ARITYVAL. The result is an out-of-bounds heap write; in practice the VM detects an impossible heap size and aborts, denying service. The required padding is large when uncompressed but the compressed-ETF envelope shrinks it to a small payload on the wire.
This issue affects OTP from OTP 25.0 before OTP 29.0.4, OTP 28.5.0.4 and OTP 27.3.4.15, corresponding to erts from 13.0 before 17.0.4, 16.4.0.4 and 15.2.7.11. |
| A flaw was found in libXpm. A local user with low privileges could exploit an Out-of-Bounds Read vulnerability in the `xpmNextWord()` function by processing a specially crafted or very small XPM (X PixMap) image file. This improper validation of file boundaries can cause an internal pointer to read beyond the file's end, leading to application crashes and Denial of Service conditions. |
| Out-of-bounds read, Reachable assertion vulnerability in Samsung Open Source Escargot allows Overread Buffers, Input Data Manipulation.
This issue affects Escargot: before 2dee22f5c7b8bf31cb7252d7731fae8c07f2842c. |
| RabbitMQ is a messaging and streaming broker. Prior to 4.2.6, RabbitMQ AMQP 0-9-1 allows an existing consumer to keep receiving messages after OAuth token expiry or connection.update_secret refresh to reduced scopes because existing consumers are not canceled or reauthorized at delivery time after the channel user state changes. This issue is fixed in version 4.2.6. |
| Denial-of-service (DoS) vulnerability due to a stack buffer overflow in the http_gdpr_decrypt function of the Mercusys MB115-4G device's web interface. An unauthenticated attacker could exploit this vulnerability by sending a specially crafted request to the /cgi/login endpoint, causing memory corruption and the httpd process to crash, resulting in a denial of service for the web administration service. |
| Insufficient validation of untrusted input in Media in Google Chrome on Windows prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: High) |
| Notepad++ 8.9.3 contains a format string injection vulnerability in the Find Results panel handler that allows attackers to cause denial of service and information disclosure by crafting a malicious nativeLang.xml language pack file. Attackers can distribute a poisoned language pack through community channels that triggers format string interpretation when a user performs search operations, leading to access violations and potential leakage of stack or register contents. |
| ProFTPD before 1.3.9c and 1.3.10rc3 contains a signed integer overflow vulnerability in the mod_sftp module's SCP size-record parser that allows authenticated low-privilege attackers to bypass ASLR by sending a crafted file size value of UINT64_MAX, which results in a negative off_t value. Attackers can exploit the subsequent conversion to uint32_t, causing an approximately 4 GB requested read length and forcing the server to read beyond the end of the SSH channel data and write overread process memory into the uploaded file. In tested configurations, the disclosed data contains libc, libcrypto, and PIE pointers sufficient to derive their randomized base addresses, thereby bypassing ASLR and enabling reliable exploitation of memory corruption vulnerabilities in the same process. |
| ProFTPD before 1.3.9c and 1.3.10rc3 contains a heap-based buffer overflow vulnerability in the mod_sftp module that allows authenticated low-privilege attackers to achieve arbitrary code execution by sending crafted SFTP packet fragments exceeding the 16 KB reassembly buffer in the fxp.c component. Attackers can supply oversized fragments to trigger an incorrectly conditioned reallocation, corrupt pool freelist metadata, overwrite the root_fs BSS global pointer to reference a fake filesystem struct, and redirect pr_fsio_stat() to system() via a crafted RENAME request. |
| Marlin Firmware through 2.1.2.7, fixed in commit 1f255d1, when built with MESH_BED_LEVELING enabled, contains an out-of-bounds write vulnerability in the M421 G-code handler that allows attackers to corrupt firmware memory by supplying out-of-range X and Y grid indices. Attackers can send a single crafted G-code command via USB serial, network interface, or malicious gcode file to write an attacker-controlled 32-bit float value past the z_values array bounds, corrupting adjacent firmware variables and causing denial of service or firmware state corruption. |
| ProFTPD mod_sftp contains a heap-based buffer overflow reachable by an authenticated SFTP user. The fxp_packet_read() function accepts the attacker-supplied 32-bit big-endian SFTP packet length without a minimum sanity check. A value of 0 causes an unsigned subtraction elsewhere in the read path to underflow to approximately 4 GB. That oversized request reaches the core memory allocator, where the rounded size is computed in size_t but passed to new_block() as a 32-bit int; the low 32 bits of 0x100000000 are 0, so new_block() returns a small (~512-byte) block while the caller is told it received ~4 GB. The subsequent fill loop then streams attacker-controlled bytes past the end of the 544-byte allocation, producing an attacker-controlled heap buffer overflow. An authenticated user can crash the per-connection ProFTPD session child on demand with a single malformed SFTP packet (packet_len=0 followed by a body greater than approximately 544 bytes), producing reliable authenticated remote denial of service. Depending on heap layout and adjacent allocations, heap metadata corruption and further consequences beyond denial of service may be possible, though only denial of service is demonstrated by the supplied proof of concept. |
| Music Player Daemon (MPD) before version 0.24.11 contains a stack buffer overflow vulnerability in the pcm_unpack_24be function in src/pcm/Pack.cxx that allows unauthenticated attackers to corrupt stack memory by triggering an off-by-one write in the PCM decoder plugin. Attackers can issue two MPD commands referencing a malicious HTTP audio source to cause the unpack loop to write 1366 entries into a 1365-entry buffer, overwriting four bytes past the array boundary with three attacker-controlled bytes from an HTTP response body, resulting in daemon termination or potential code execution. |
| Spatie Laravel Media Library before version 11.23.0 contains a file upload restriction bypass in FileAdder::defaultSanitizer(). The sanitizer checks only the final filename suffix, allowing double-extension filenames such as shell.php.jpg to bypass the blocklist, with pathinfo() preserving inner .php stems in saved filenames. The blocklist also omits executable extensions including .php6, .shtml, and .htaccess. The double-extension bypass requires a legacy Apache AddHandler configuration to achieve PHP execution; the incomplete blocklist bypass does not. |
| Vvveb before version 1.0.8.2 contains an authenticated remote code execution vulnerability in the admin code editor that allows low-privilege authenticated users to execute arbitrary code through insufficient file extension restrictions, with the uploaded payload then executable via subsequent unauthenticated HTTP requests. Attackers with editor, author, contributor, or site_admin roles can write a malicious .htaccess file to map arbitrary extensions to the PHP handler, then upload PHP code with that extension to achieve unauthenticated remote code execution when the file is accessed via HTTP. |
| Vvveb before version 1.0.8.2 contains an information disclosure vulnerability that allows unauthenticated attackers to obtain sensitive server information by triggering unhandled exceptions in the password-reset module. Attackers can access the admin password-reset endpoint to trigger a fatal error caused by a missing namespace import, which exposes the absolute server file path, internal class namespaces, line numbers, and source code excerpts through the debug exception handler rendered to unauthenticated requests. |
| OpenPLC_v3 contains a heap-based buffer overflow in the getData() function in webserver/core/modbus_master.cpp. getData() reads characters between two delimiters into a caller-supplied buffer with no size parameter and no bounds check. In parseConfig() the function is invoked with the 100-byte heap-allocated MB_device.dev_name field. An authenticated attacker with access to the OpenPLC web interface can send a crafted HTTP POST to the /modbus endpoint with an oversized device_name value; the value is persisted to mbconfig.cfg and parsed on load, overflowing dev_name and overwriting adjacent struct fields (protocol at offset 108, dev_address at offset 109, ip_port at offset 210). A 200-byte payload writes 100 bytes past the allocation. The result is heap corruption leading to runtime crash and denial of service of the PLC process control loop, with attacker-controlled overwrite of adjacent configuration fields. The upstream repository was archived on 2026-04-04 and no fix is expected; the vendor has confirmed the issue does not affect OpenPLC Runtime v4. |
| Cesanta Mongoose before 7.22 contains an out-of-bounds read in the built-in TLS server function mg_tls_server_recv_hello(), which uses an attacker-controlled session_id_len byte from a TLS ClientHello as a buffer index without validating it against the length of received data. A remote, unauthenticated attacker can send a single crafted ClientHello with an oversized session id length to read past the receive buffer, crashing any HTTPS, MQTTS, or WSS service built on MG_TLS_BUILTIN. |
| Deck Mate 1 executes firmware directly from an external EEPROM without verifying authenticity or integrity. An attacker with physical access can replace or reflash the EEPROM to run arbitrary code that persists across reboots. Because this design predates modern secure-boot or signed-update mechanisms, affected systems should be physically protected or retired from service. The vendor has not indicated that firmware updates are available for this legacy model. |
