| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "arm64: dts: qcom: sdm845: Affirm IDR0.CCTW on apps_smmu"
There are reports that the pagetable walker cache coherency is not a
given across the spectrum of SDM845/850 devices, leading to lock-ups
and resets. It works fine on some devices (like the Dragonboard 845c,
but not so much on the Lenovo Yoga C630).
This unfortunately looks like a fluke in firmware development, where
likely somewhere in the vast hypervisor stack, a change to accommodate
for this was only introduced after the initial software release (which
often serves as a baseline for products).
Revert the change to avoid additional guesswork around crashes.
This reverts commit 6b31a9744b8726c69bb0af290f8475a368a4b805. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Fix the page details for the srq created by kernel consumers
While using nvme target with use_srq on, below kernel panic is noticed.
[ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514)
[ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
..
[ 566.393799] <TASK>
[ 566.393807] ? __die_body+0x1a/0x60
[ 566.393823] ? die+0x38/0x60
[ 566.393835] ? do_trap+0xe4/0x110
[ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393881] ? do_error_trap+0x7c/0x120
[ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393911] ? exc_divide_error+0x34/0x50
[ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393939] ? asm_exc_divide_error+0x16/0x20
[ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re]
[ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re]
[ 566.394057] ? srso_return_thunk+0x5/0x5f
[ 566.394068] ? __init_swait_queue_head+0x4a/0x60
[ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core]
[ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma]
[ 566.394174] ? lock_release+0x22c/0x3f0
[ 566.394187] ? srso_return_thunk+0x5/0x5f
Page size and shift info is set only for the user space SRQs.
Set page size and page shift for kernel space SRQs also. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: always handle address removal under msk socket lock
Syzkaller reported a lockdep splat in the PM control path:
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 sock_owned_by_me include/net/sock.h:1711 [inline]
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 msk_owned_by_me net/mptcp/protocol.h:363 [inline]
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788
Modules linked in:
CPU: 0 UID: 0 PID: 6693 Comm: syz.0.205 Not tainted 6.14.0-rc2-syzkaller-00303-gad1b832bf1cf #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
RIP: 0010:sock_owned_by_me include/net/sock.h:1711 [inline]
RIP: 0010:msk_owned_by_me net/mptcp/protocol.h:363 [inline]
RIP: 0010:mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788
Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ca 7b d3 f5 eb b9 e8 c3 7b d3 f5 90 0f 0b 90 e9 dd fb ff ff e8 b5 7b d3 f5 90 <0f> 0b 90 e9 3e fb ff ff 44 89 f1 80 e1 07 38 c1 0f 8c eb fb ff ff
RSP: 0000:ffffc900034f6f60 EFLAGS: 00010283
RAX: ffffffff8bee3c2b RBX: 0000000000000001 RCX: 0000000000080000
RDX: ffffc90004d42000 RSI: 000000000000a407 RDI: 000000000000a408
RBP: ffffc900034f7030 R08: ffffffff8bee37f6 R09: 0100000000000000
R10: dffffc0000000000 R11: ffffed100bcc62e4 R12: ffff88805e6316e0
R13: ffff88805e630c00 R14: dffffc0000000000 R15: ffff88805e630c00
FS: 00007f7e9a7e96c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2fd18ff8 CR3: 0000000032c24000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
mptcp_pm_remove_addr+0x103/0x1d0 net/mptcp/pm.c:59
mptcp_pm_remove_anno_addr+0x1f4/0x2f0 net/mptcp/pm_netlink.c:1486
mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_netlink.c:1518 [inline]
mptcp_pm_nl_del_addr_doit+0x118d/0x1af0 net/mptcp/pm_netlink.c:1629
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb1f/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2543
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1348
netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:733
____sys_sendmsg+0x53a/0x860 net/socket.c:2573
___sys_sendmsg net/socket.c:2627 [inline]
__sys_sendmsg+0x269/0x350 net/socket.c:2659
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7e9998cde9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7e9a7e9038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f7e99ba5fa0 RCX: 00007f7e9998cde9
RDX: 000000002000c094 RSI: 0000400000000000 RDI: 0000000000000007
RBP: 00007f7e99a0e2a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f7e99ba5fa0 R15: 00007fff49231088
Indeed the PM can try to send a RM_ADDR over a msk without acquiring
first the msk socket lock.
The bugged code-path comes from an early optimization: when there
are no subflows, the PM should (usually) not send RM_ADDR
notifications.
The above statement is incorrect, as without locks another process
could concur
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Handle weird files
A corrupted filesystem (e.g. bcachefs) might return weird files.
Instead of throwing a warning and allowing access to such file, treat
them as regular files. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't flush non-uploaded STAs
If STA state is pre-moved to AUTHORIZED (such as in IBSS
scenarios) and insertion fails, the station is freed.
In this case, the driver never knew about the station,
so trying to flush it is unexpected and may crash.
Check if the sta was uploaded to the driver before and
fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: class: Fix wild pointer dereferences in API class_dev_iter_next()
There are a potential wild pointer dereferences issue regarding APIs
class_dev_iter_(init|next|exit)(), as explained by below typical usage:
// All members of @iter are wild pointers.
struct class_dev_iter iter;
// class_dev_iter_init(@iter, @class, ...) checks parameter @class for
// potential class_to_subsys() error, and it returns void type and does
// not initialize its output parameter @iter, so caller can not detect
// the error and continues to invoke class_dev_iter_next(@iter) even if
// @iter still contains wild pointers.
class_dev_iter_init(&iter, ...);
// Dereference these wild pointers in @iter here once suffer the error.
while (dev = class_dev_iter_next(&iter)) { ... };
// Also dereference these wild pointers here.
class_dev_iter_exit(&iter);
Actually, all callers of these APIs have such usage pattern in kernel tree.
Fix by:
- Initialize output parameter @iter by memset() in class_dev_iter_init()
and give callers prompt by pr_crit() for the error.
- Check if @iter is valid in class_dev_iter_next(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime
After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct
md_bitmap_stats"), following panic is reported:
Oops: general protection fault, probably for non-canonical address
RIP: 0010:bitmap_get_stats+0x2b/0xa0
Call Trace:
<TASK>
md_seq_show+0x2d2/0x5b0
seq_read_iter+0x2b9/0x470
seq_read+0x12f/0x180
proc_reg_read+0x57/0xb0
vfs_read+0xf6/0x380
ksys_read+0x6c/0xf0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Root cause is that bitmap_get_stats() can be called at anytime if mddev
is still there, even if bitmap is destroyed, or not fully initialized.
Deferenceing bitmap in this case can crash the kernel. Meanwhile, the
above commit start to deferencing bitmap->storage, make the problem
easier to trigger.
Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
dm thin: make get_first_thin use rcu-safe list first function
The documentation in rculist.h explains the absence of list_empty_rcu()
and cautions programmers against relying on a list_empty() ->
list_first() sequence in RCU safe code. This is because each of these
functions performs its own READ_ONCE() of the list head. This can lead
to a situation where the list_empty() sees a valid list entry, but the
subsequent list_first() sees a different view of list head state after a
modification.
In the case of dm-thin, this author had a production box crash from a GP
fault in the process_deferred_bios path. This function saw a valid list
head in get_first_thin() but when it subsequently dereferenced that and
turned it into a thin_c, it got the inside of the struct pool, since the
list was now empty and referring to itself. The kernel on which this
occurred printed both a warning about a refcount_t being saturated, and
a UBSAN error for an out-of-bounds cpuid access in the queued spinlock,
prior to the fault itself. When the resulting kdump was examined, it
was possible to see another thread patiently waiting in thin_dtr's
synchronize_rcu.
The thin_dtr call managed to pull the thin_c out of the active thins
list (and have it be the last entry in the active_thins list) at just
the wrong moment which lead to this crash.
Fortunately, the fix here is straight forward. Switch get_first_thin()
function to use list_first_or_null_rcu() which performs just a single
READ_ONCE() and returns NULL if the list is already empty.
This was run against the devicemapper test suite's thin-provisioning
suites for delete and suspend and no regressions were observed. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix the maximum cell name length
The kafs filesystem limits the maximum length of a cell to 256 bytes, but a
problem occurs if someone actually does that: kafs tries to create a
directory under /proc/net/afs/ with the name of the cell, but that fails
with a warning:
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:405
because procfs limits the maximum filename length to 255.
However, the DNS limits the maximum lookup length and, by extension, the
maximum cell name, to 255 less two (length count and trailing NUL).
Fix this by limiting the maximum acceptable cellname length to 253. This
also allows us to be sure we can create the "/afs/.<cell>/" mountpoint too.
Further, split the YFS VL record cell name maximum to be the 256 allowed by
the protocol and ignore the record retrieved by YFSVL.GetCellName if it
exceeds 253. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent. |
| RabbitMQ is a messaging and streaming broker. Prior to 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the obsolete GET /api/auth endpoint can disclose the OAuth 2 client secret on RabbitMQ installations configured with management.oauth_client_secret, exposing credentials to unauthenticated callers when the management plugin and that OAuth configuration are enabled. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| A malicious actor with access to the network and low privileges could exploit an Improper Input Validation vulnerability found in UniFi OS to execute a Command Injection on the host device. |
| Easy!Appointments is a self hosted appointment scheduler. In versions up to and including 1.5.2, the booking reschedule view at `/index.php/booking/reschedule/{appointment_hash}` (handled by `Booking::index()`) embeds the entire customer record as inline JavaScript (`const vars = {... "customer_data": {...}, ...}`) without authentication and without field whitelisting. Anyone in possession of the 12-character `appointment_hash` — which appears in plain text in reschedule emails, confirmation page URLs, and operator-side calendar links — can read every column of that customer's row in the `ea_users` table. Version 1.6.0 contains a patch. |
| Dompdf is an HTML to PDF converter for PHP. In versions 3.15 and prior, the validateLocalUri() method enforces chroot boundaries with a strpos() prefix check after normalizing paths with realpath() . Because normalization strips the trailing directory separator from $chrootPath , the check only verifies that $chrootPath is a string prefix of $realfile, so a chroot of /var/www also matches sibling directories like /var/www2 , /var/www-admin, or /var/www_backup. An attacker who controls part of the rendered HTML could exploit this to escape the chroot and read sensitive files outside the allowed directory. This issue has been fixed in version 3.16. |
| find-my-way is a framework-independent HTTP router that internally uses a Radix Tree and supports route parameters and wildcards. Versions prior to 9.7.0 are vulnerable to remotely triggerable DoS in find-my-way when it is used with Node's HTTP/2 server. The lookup() function passes req.method into find(), and find() indexes this.trees[method]. Since this.trees is a normal object, HTTP/2 method values like constructor, toString, or __proto__ can resolve inherited object properties instead of returning undefined. The code then treats that value like a router node and crashes when it reaches currentNode.prefix.length. This issue has been fixed in version 9.0.7. |
| We found a chain of combining multiple weaknesses in the product that could allow an attacker to become any user in the backend and access any data:
*
The payment integration plugins Stripe (included in the core system), pretix-mollie, pretix-oppwa, pretix-bitpay, pretix-payone, pretix-secuconnect, pretix-sofort, and pretix-saferpay
contain a code path that is intended for the transport of session
parameters from a tab with isolated cookies (e.g. in the pretix widget)
to a new tab. For this purpose, a set of session parameters is
cryptographically signed and then passed to the new tab as a URL
parameter. The plugins perform no further validation of the session
parameters, other than the cryptographic signature being valid. This is
fixed with the releases issued today by strictly validating that no
session parameters outside of the scope of the respective plugin may be
set.
*
An unrelated feature in the core system is used to generate redirect links that obfuscate any Referer
headers for outgoing links to prevent leakage of secrets in URLs. This
redirect page also requires cryptographically signed parameters.
Unfortunately, it uses the same key and salt for the signature as the
previously mentioned feature in the payment integration plugins. A
motivated attacker with access to at least one event in the backend can
trick the system into cryptographically signing arbitrary content using
specially crafted links. In combination with the previous issue, the
attacker could use this to set and modify arbitrary parameters on their
user session by injecting the signed parameters into the feature of the
payment providers. This is fixed with the releases issued today by using
different salts for the signature for each plugin and feature.
*
A third, unrelated feature in the core system is used for admin users
to act on behalf of another user, mostly for debugging purposes. With
being able to insert arbitrary parameters into a session, an attacker
can abuse this feature to change their session from their actual user to
any user in the system by guessing a valid user ID. This is fixed with
the release today by requiring unguessable information to be contained
in the session of the user to switch to. |
| An unauthenticated improper input validation vulnerability in the POST /fetch_cve_data endpoint in cve-search. A remote attacker can manipulate request parameters controlling the MongoDB collection, projected fields, and regular-expression filters to read arbitrary application MongoDB collections. This can expose administrative usernames and password hashes from the mgmt_users collection, enabling offline password cracking and potential administrative account compromise. |
| Pagy is agnostic pagination in plain Ruby. From 43.0.0 until 43.5.6, Pagy::I18n.locale= in gem/lib/pagy/modules/i18n/i18n.rb stored locale values verbatim and later used them as <locale>.yml path components, allowing untrusted params[:locale] values with absolute paths or ../ sequences to create a file existence and readability oracle for YAML files. This issue is fixed in version 43.5.6. |
| An information disclosure vulnerability in Koollab LMS allowed an authenticated learner
to obtain correct quiz answers from the course status endpoint without
completing the assessment legitimately, compromising the integrity of
assessments. |
| webpack-dev-server versions 5.2.5 and earlier terminate the whole Node.js process when an unauthenticated peer sends either a normal HTTP request with a malformed Host header or a WebSocket upgrade to the default /ws endpoint with a malformed Origin header. The malformed value causes an uncaught exception in the host-validation path and crashes the dev server. Impact is limited to availability of the development server, no data disclosure, no code execution. Patches: upgrade to webpack-dev-server 5.2.6. Workarounds: keep the dev server bound to localhost (the default) and do not expose it to untrusted networks. |
