| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Apereo CAS 7.3.0 before 8.0.0-RC6 contains a cryptographic vulnerability that allows remote unauthenticated attackers to recover plaintext conversation state by exploiting AES-GCM initialization vector reuse across the server lifetime. Attackers can collect multiple client-side webflow execution tokens from the unauthenticated login page and perform known-plaintext analysis to decrypt the webflow conversation state due to keystream reuse caused by a fixed all-zero IV paired with the same encryption key. |
| Libreswan, via the function RSA_authenticate_hash_signature_raw_rsa(), did not correctly verify the length of the authentication hash when the SIG payload of an IKEv1 packet was encoded using PKCS #1 RSA Encryption as per RFC 2313. A remote attacker can use a variation on the Bleichenbacher attack to forge the SIG payload when small public exponents are being used (e.g., e=3), which could lead to impersonation. Additionally, a remote attacker, by encoding a shorter than expected hash in the SIG payload, could trigger an assertion leading to denial-of-service. The daemon aborts and restarts; continued exploitation causes sustained denial of service. Remote code execution is not possible. X.509 certificate verifications of remote IKE peers are not affected. |
| A flaw was found in binutils, specifically within the `readelf` utility. This vulnerability allows a local attacker to cause a Denial of Service (DoS) by tricking a user into processing a specially crafted Executable and Linkable Format (ELF) file. The exploitation of this flaw can lead to the system becoming unresponsive due to excessive resource consumption or a program crash. |
| A flaw was found in libtiff. A remote attacker could exploit this vulnerability by providing a specially crafted PixarLog-compressed TIFF image. This issue occurs when decoding Pixarlog codec images with the PIXARLOGDATAFMT_8BITABGR output format and a specific stride value, leading to a heap-based buffer overflow. This could potentially result in arbitrary code execution or a denial of service (DoS). |
| Libreswan, via the function RSA_authenticate_hash_signature_pkcs1_1_5_rsa(), did not correctly verify the DER encoding of the ASN.1 digest when the IKEv2 AUTH payload was encoded using RSASSA-PKCS1-v1_5 (RFC 8017). A remote attacker can use a variation on the Bleichenbacher attack to forge the AUTH payload when small public exponents are used (e.g., e=3), leading to impersonation. Additionally, a remote attacker, by encoding a shorter than expected hash in the AUTH payload, could trigger an assertion leading to denial-of-service. The daemon aborts and restarts; continued exploitation causes sustained denial of service. Remote code execution is not possible. X.509 certificate verifications of the remote IKE peer are not affected. |
| Cockpit CMS before release 364 contains a path traversal and local file inclusion vulnerability that allows unauthenticated attackers to read arbitrary files or execute PHP files by including unvalidated PATH_INFO derived from REQUEST_URI in filesystem path construction without containment checks. Attackers can inject dot-dot sequences into the URL to traverse outside the designated spaces directory, and when the resolved path ends with a .php extension, the application passes it to include(), enabling local file inclusion on deployments using the PHP built-in server or certain non-default Nginx configurations. |
| An invalidly formatted IKEv2 fragment causes the Libreswan pluto daemon to crash and restart. Continued exploitation would cause a denial of service. The function reassemble_v2_incoming_fragments() would ignore unknown outer payloads but still store these in a fixed size array msg_digest.digest[PAYLIMIT]. An off-by-one error in the assertion PASSERT(logger, md->digest_roof < elemsof(md->digest)) causes the daemon to abort. No remote code execution is possible. Any configuration that allows IKEv2 connections that do not set fragmentation=no are vulnerable. IKEv1 is not affected. |
| Observable Response Discrepancy vulnerability in Erlang OTP ssh (ssh_sftpd module) allows an authenticated SFTP user to enumerate the existence of files and directories outside the configured root directory.
The SSH_FXP_REALPATH handler in ssh_sftpd calls relate_file_name/3 with Canonicalize=false, unlike every other SFTP operation handler. This allows .. components in the requested path to bypass the is_within_root/2 check without being resolved. The un-canonicalized path then enters resolve_symlinks/2, which walks up the directory tree above the configured root and issues read_link() syscalls on arbitrary filesystem paths.
An authenticated SFTP client can exploit this by sending a REALPATH request with a crafted traversal path. The server response differs depending on whether the target path exists on the host filesystem (SSH_FXP_NAME when the path resolves successfully, SSH_FX_NO_SUCH_FILE when it does not). This creates a path-existence oracle that an attacker can use to enumerate the filesystem structure outside the configured root, including the existence of sensitive files, directories, and mount points.
The vulnerability leaks only the existence of paths. No file contents, credentials, or write access are obtainable through this issue alone. The information gained may assist further attacks when combined with other vulnerabilities.
This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl and program routine ssh_sftpd:handle_op/4.
This issue affects OTP from OTP 17.0 until OTP 29.0.3, 28.5.0.3, and 27.3.4.14 corresponding to ssh from 3.0.1 until 6.0.2, 5.5.2.2, and 5.2.11.9. |
| mchange-commons-java is a Java library of shared utility classes used by mchange projects like the c3p0 connection pool. Prior to version 0.6.0, its JNDI ObjectFactory implementation (com.mchange.v2.naming.JavaBeanObjectFactory) will construct objects of arbitrary classes and initialize "JavaBean"-style properties, which for certain classes enables JNDI injection and "deserialization gadgets." Such initialization is unsafe for some classes: for example, setting the contentType property of a Swing JEditorPane to text/html and its text property to HTML containing a stylesheet <link> will provoke an HTTP GET on an arbitrary URL, potentially from within a trusted security domain. The problem is aggravated by the library's ReferenceIndirector, through which malicious JNDI Reference objects can be smuggled in for dereferencing wherever an application reads a Java-serialized object. This has been resolved in version 0.6.0. |
| A path traversal vulnerability exists in the Git Service component shared by Altium Enterprise Server and Altium 365. The service accepts a sequence of post-clone file-manipulation operations that use user-supplied paths without validation, allowing an authenticated user with basic git access to move arbitrary files outside the intended repository area.
This file-move primitive can be used to place attacker-controlled script content into directories where it is later executed by the service, resulting in remote code execution under the Git Service account. On multi-tenant Altium 365 deployments, this could have allowed access to data belonging to other tenants on the same infrastructure node. Altium Enterprise Server is fixed in 8.1.1. The issue has been remediated across Altium 365 shared multi-tenant deployments at the service level; remediation is in progress on remaining Altium 365 deployments. |
| Time-of-check Time-of-use (TOCTOU) race condition vulnerability in Erlang/OTP ssl (dtls_packet_demux module) allows an unauthenticated remote attacker to crash all active DTLS sessions on a listener.
A DTLS server listener uses a single shared dtls_packet_demux gen_server process to route incoming UDP datagrams to the correct connection handler. When a DTLS client reconnects rapidly from the same source address and port (sending multiple ClientHello messages in quick succession), a race condition in the demux's internal gb_trees key-value store causes a {key_exists, {old, Client}} crash, terminating the demux process. Because the demux is shared across all DTLS associations on that listener, its crash immediately kills every active DTLS session, not just the attacker's.
The attack is pre-authentication: the attacker only needs to send UDP datagrams containing valid ClientHello messages from the same source IP and port before the intermediate DOWN monitor message is processed by the gen_server. No credentials, no completed handshake, and no special configuration are required, and the crash can be repeated indefinitely to create a persistent denial of service for all clients of that listener.
This vulnerability is associated with program file lib/ssl/src/dtls_packet_demux.erl.
This issue affects OTP from OTP 25.3 before 29.0.3, 28.5.0.3, and 27.3.4.14 corresponding to ssl from 10.9 before 11.7.3, 11.6.0.3, and 11.2.12.10. |
| fast-mcp-telegram is a Telegram MCP Server. Prior to 0.19.1, fast-mcp-telegram validates HTTP Bearer tokens by joining the raw token string into a session-file path. The verifier rejects the exact reserved token telegram, but it does not reject path separators or normalize the path before checking whether the session file exists. A remote HTTP client can therefore authenticate as the default legacy session with a token such as ../fast-mcp-telegram/telegram when the documented default session file ~/.config/fast-mcp-telegram/telegram.session exists. This bypasses the reserved session name control that is intended to prevent HTTP multi-user sessions from colliding with the default stdio or legacy account. With account-prefixed MCP tools enabled, the attacker still sees and calls the prefixed tools for the default account, so the prefix middleware does not stop the session selection bypass. This vulnerability is fixed in 0.19.1. |
| The Adminify WordPress plugin before 4.2.10 does not perform per-user read-capability checks on the results returned by one of its administration search features, allowing users with a low-privilege role (Contributor) to disclose non-public content that WordPress would not otherwise expose to them, such as other authors' unpublished post titles, pending comment content, the site's Adminify WordPress plugin before 4.2.10 inventory, and user account names. |
| The My Calendar – Accessible Event Manager plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 3.7.14 via the 'vcal' parameter due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to enumerate occurrence IDs and access the full iCalendar export of non-public, draft, trashed, and personal calendar events, disclosing sensitive event metadata including titles, descriptions, dates, locations, organizer and host details, permalinks, and related calendar metadata. |
| Use after free in GPU in Google Chrome prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Eclipse Wakaama before snapshot/2026-05-26 contains an unbounded memory allocation vulnerability in the CoAP Block1 handler within coap/block.c that allows unauthenticated remote attackers to exhaust server memory by sending a sequence of Block1 PUT requests with incrementing block numbers. Attackers can target the registration endpoint over UDP without authentication, causing the server to repeatedly reallocate a growing accumulation buffer by appending each block payload without enforcing any maximum total size limit, resulting in denial of service through memory exhaustion. |
| react-native-receive-sharing-intent contains a path traversal vulnerability that allows a co-resident malicious application to write files outside the intended cache directory by supplying a crafted _display_name value containing dot-dot path components through a malicious ContentProvider. Attackers can fire an explicit ACTION_SEND intent at the consuming app's exported share-receiver activity to overwrite arbitrary files in the consuming app's private data directory, including databases, shared preferences, and cached configuration, with attacker-controlled content. |
| Inappropriate implementation in XML in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Use after free in DOM in Google Chrome prior to 150.0.7871.47 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| AutoBangumi before 3.2.8 contains a hard-coded default credentials vulnerability that allows unauthenticated attackers to authenticate as the administrator by using the publicly known default credentials seeded at startup via add_default_user() in the database user module when the users table is empty. Attackers can submit the default credentials to the authentication login endpoint to gain full control of the application, including RSS feed configuration, downloader configuration, and all authenticated API endpoints. |
