| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ptp: don't WARN when controlling PF is unavailable
In VFIO passthrough setups, it is possible to pass through only a PF
which doesn't own the source timer. In that case the PTP controlling PF
(adapter->ctrl_pf) is never initialized in the VM, so ice_get_ctrl_ptp()
returns NULL and triggers WARN_ON() in ice_ptp_setup_pf().
Since this is an expected behavior in that configuration, replace
WARN_ON() with an informational message and return -EOPNOTSUPP. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: dummy-hcd: Fix locking/synchronization error
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again. |
| Vvveb is a powerful and easy to use CMS with page builder to build websites, blogs or ecommerce stores. Prior to 1.0.8.3, the checkout endpoint accepts a user-controlled cart_id and uses it to enter the payment flow without verifying cart ownership. A logged-in attacker can therefore reuse another user's cart data in their own checkout session. This vulnerability is fixed in 1.0.8.3. |
| A chmod call in the cPanel Nova plugin's Cpanel::Nova::Connector follows symlinks, allowing setting root permissions on arbitrary system files or directories. That can cause DoS or local privilege escalation when an authenticated cPanel user places a symlink at a user-controlled legacy Nova path under their home directory. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref()
There is no need to BUG(), we can just return an error and log an error
message. |
| Uncontrolled Recursion vulnerability in Apache Commons.
When processing an untrusted configuration file, Commons Configuration will throw a StackOverflowError for YAML input with cycles.
This issue affects Apache Commons: from 2.2 before 2.15.0.
Users are recommended to upgrade to version 2.15.0, which fixes the issue. |
| libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. From to 1.8.7-r1, a wrong NULL check after an allocation call in sixel_decode_raw and sixel_decode causes a NULL pointer dereference whenever the allocation fails. The check tests the address of the output parameter (always non-NULL) instead of the value the malloc returned. On allocation failure, the function continues and writes through a NULL pointer, crashing the process. This is a denial of service against any caller of these public APIs that hits a low-memory condition. This vulnerability is fixed in 1.8.7-r2. |
| SQLBot is an intelligent Text-to-SQL system based on large language models and RAG. Prior to 1.8.0, SQLBot contains a Cross-Workspace IDOR (Insecure Direct Object Reference) and Authorization Bypass vulnerability in the /api/v1/datasource/exportDsSchema and /api/v1/datasource/uploadDsSchema endpoints. An attacker can access and modify database schemas and data sources belonging to other tenants/workspaces. This vulnerability is fixed in 1.8.0. |
| ShellHub is a centralized SSH gateway. Prior to 0.24.2, GET /api/sessions/:uid returns the full session object for any authenticated caller, without scoping by the caller's tenant. An authenticated user can read session records (SSH username, device UID, remote IP, terminal type, authenticated flag, timestamps) belonging to any other namespace. This vulnerability is fixed in 0.24.2. |
| gittuf is a platform-agnostic Git security system. Prior to 0.14.0, an attacker with push access to gittuf's Reference State Log (RSL) can roll back the current policy to any previous policy trusted by the current set of root keys. gittuf determines the policy to load by inspecting the RSL. Except for the very first policy (which is automatically trusted given gittuf's TOFU model, or verified against manually specified keys), whenever an RSL entry that points to a new policy is encountered, gittuf validates that this policy is trusted. This is done by checking that the new policy’s root metadata is signed by the required threshold of the current policy's root keys. Because of this, an attacker with push access to the RSL may create a new entry that references an old policy (that is trusted by the most recent policy's set of root keys), thereby rolling back gittuf's policy to the attacker's chosen state. This vulnerability is fixed in 0.14.0. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix in-place encryption corruption in SMB2_write()
SMB2_write() places write payload in iov[1..n] as part of rq_iov.
smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message()
encrypts iov[1] in-place, replacing the original plaintext with
ciphertext. On a replayable error, the retry sends the same iov[1]
which now contains ciphertext instead of the original data,
resulting in corruption.
The corruption is most likely to be observed when connections are
unstable, as reconnects trigger write retries that re-send the
already-encrypted data.
This affects SFU mknod, MF symlinks, etc. On kernels before
6.10 (prior to the netfs conversion), sync writes also used
this path and were similarly affected. The async write path
wasn't unaffected as it uses rq_iter which gets deep-copied.
Fix by moving the write payload into rq_iter via iov_iter_kvec(),
so smb3_init_transform_rq() deep-copies it before encryption. |
| External control of file name or path in Microsoft Edge (Chromium-based) allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Workaround SQM/PSE stalls by disabling sticky
NIX SQ manager sticky mode is known to cause stalls when multiple SQs
share an SMQ and transmit concurrently. Additionally, PSE may deadlock
on transitions between sticky and non-sticky transmissions. There is
also a credit drop issue observed when certain condition clocks are
gated.
work around these hardware errata by:
- Disabling SQM sticky operation:
- Clear TM6 (bit 15)
- Clear TM11 (bit 14)
- Disabling sticky → non-sticky transition path that can deadlock PSE:
- Clear TM5 (bit 23)
- Preventing credit drops by keeping the control-flow clock enabled:
- Set TM9 (bit 21)
These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this
configuration the SQM/PSE maintain forward progress under load without
credit loss, at the cost of disabling sticky optimizations. |
| Stack exhaustion vulnerability in the MongoDB PHP driver can cause application crashes when processing deeply nested BSON documents in unusual circumstances when the source of these BSON documents is not MongoDB Server. |
| A use of potentially dangerous function vulnerability in Fortinet FortiAnalyzer 7.6.0 through 7.6.4, FortiAnalyzer 7.4.0 through 7.4.8, FortiAnalyzer 7.2 all versions, FortiAnalyzer 7.0 all versions, FortiAnalyzer 6.4 all versions, FortiManager 7.6.0 through 7.6.4, FortiManager 7.4.0 through 7.4.8, FortiManager 7.2 all versions, FortiManager 7.0 all versions, FortiManager 6.4 all versions may allow an authenticated attacker to cause a system hang via multiple specially crafted HTTP requests causing crashes. This happens if internal locks are aligned, which is out of control of the attacker. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix mismatched unlock for DMUB HW lock in HWSS fast path
[Why]
The evaluation for whether we need to use the DMUB HW lock isn't the
same as whether we need to unlock which results in a hang when the
fast path is used for ASIC without FAMS support.
[How]
Store a flag that indicates whether we should use the lock and use
that same flag to specify whether unlocking is needed. |
| A session management vulnerability in AOS-8 allows previously authenticated users to retain network access after their accounts are administratively disabled. Existing sessions are not invalidated when credentials are revoked, enabling continued access until session expiration. An attacker with compromised credentials could exploit this behavior to maintain unauthorized access even after the account has been disabled. |
| Katalyst Koi is a framework for building Rails admin functionality. Prior to 4.20.0 and 5.6.0, admin session cookies were not invalidated when an admin user logged out. An attacker with access to a valid admin session cookie could continue to access admin functionality after logout, until the cookie expired or session secrets were rotated. This vulnerability is fixed in 4.20.0 and 5.6.0. |
| vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.2, This vulnerability is fixed in 3.11.2. |
| External Control of File Name or Path in the Mail feature of Zoom Workplace for Windows before 6.6.0 may allow an unauthenticated user to conduct an escalation of privilege via network access. |
