| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp
process_sdp() declares union nf_inet_addr rtp_addr on the stack and
passes it to the nf_nat_sip sdp_session hook after walking the SDP
media descriptions. However rtp_addr is only initialized inside the
media loop when a recognized media type with a non-zero port is found.
If the SDP body contains no m= lines, only inactive media sections
(m=audio 0 ...) or only unrecognized media types, rtp_addr is never
assigned. Despite that, the function still calls hooks->sdp_session()
with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack
value as an IP address and rewrite the SDP session owner and connection
lines with it.
With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this
results in the session-level o= and c= addresses being rewritten to
0.0.0.0 for inactive SDP sessions. Without stack auto-init the
rewritten address is whatever happened to be on the stack.
Fix this by pre-initializing rtp_addr from the session-level connection
address (caddr) when available, and tracking via a have_rtp_addr flag
whether any valid address was established. Skip the sdp_session hook
entirely when no valid address exists. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD
__build_packet_message() manually constructs the NFULA_PAYLOAD netlink
attribute using skb_put() and skb_copy_bits(), bypassing the standard
nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes
are allocated (including NLA alignment padding), only data_len bytes
of actual packet data are copied. The trailing nla_padlen(data_len)
bytes (1-3 when data_len is not 4-byte aligned) are never initialized,
leaking stale heap contents to userspace via the NFLOG netlink socket.
Replace the manual attribute construction with nla_reserve(), which
handles the tailroom check, header setup, and padding zeroing via
__nla_reserve(). The subsequent skb_copy_bits() fills in the payload
data on top of the properly initialized attribute. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: fix type confusion in bond_setup_by_slave()
kernel BUG at net/core/skbuff.c:2306!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306
RSP: 0018:ffffc90004aff760 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e
RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900
RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000
R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780
R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0
Call Trace:
<TASK>
ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900
dev_hard_header include/linux/netdevice.h:3439 [inline]
packet_snd net/packet/af_packet.c:3028 [inline]
packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa54/0xc30 net/socket.c:2592
___sys_sendmsg+0x190/0x1e0 net/socket.c:2646
__sys_sendmsg+0x170/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe1a0e6c1a9
When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond,
bond_setup_by_slave() directly copies the slave's header_ops to the
bond device:
bond_dev->header_ops = slave_dev->header_ops;
This causes a type confusion when dev_hard_header() is later called
on the bond device. Functions like ipgre_header(), ip6gre_header(),all use
netdev_priv(dev) to access their device-specific private data. When
called with the bond device, netdev_priv() returns the bond's private
data (struct bonding) instead of the expected type (e.g. struct
ip_tunnel), leading to garbage values being read and kernel crashes.
Fix this by introducing bond_header_ops with wrapper functions that
delegate to the active slave's header_ops using the slave's own
device. This ensures netdev_priv() in the slave's header functions
always receives the correct device.
The fix is placed in the bonding driver rather than individual device
drivers, as the root cause is bond blindly inheriting header_ops from
the slave without considering that these callbacks expect a specific
netdev_priv() layout.
The type confusion can be observed by adding a printk in
ipgre_header() and running the following commands:
ip link add dummy0 type dummy
ip addr add 10.0.0.1/24 dev dummy0
ip link set dummy0 up
ip link add gre1 type gre local 10.0.0.1
ip link add bond1 type bond mode active-backup
ip link set gre1 master bond1
ip link set gre1 up
ip link set bond1 up
ip addr add fe80::1/64 dev bond1 |
| libheif is a HEIF and AVIF file format decoder and encoder. In versions 1.21.2 and prior, when decoding a HEIF grid image with strict_decoding=false (the default), a corrupted tile silently fails to decode and the library returns heif_error_Ok with no indication of failure, leading to an uninitialized heap memory information leak. The canvas is allocated via create_clone_image_at_new_size() → plane.alloc() → new (std::nothrow) uint8_t[allocation_size] which does not zero the memory; only the alpha plane is explicitly initialized via fill_plane(), so the Y, Cb, and Cr planes contain whatever was previously at that heap address. The failed tile's region of the canvas is never written. It retains uninitialized heap data that is delivered to the caller as decoded pixel values (4,096 bytes per Y/Cb/Cr plane = 12,288+ bytes total). Any application using libheif to decode grid-based HEIF/AVIF files with default settings is vulnerable: a crafted .heic or .avif file causes 4,096+ bytes of heap memory to appear as pixel values in the decoded image, and the calling application receives heif_error_Ok, so it has no indication the output contains heap garbage. In server-side image processing, an uploaded crafted HEIF decoded and re-encoded (e.g., as PNG/JPEG for thumbnails, CDN, social media) can leak cross-user data such as auth tokens, database results, and other users' image data. This issue has been fixed in version 1.22.0. |
| Improper Neutralization of Special Elements used in an LDAP Query ('LDAP Injection') vulnerability in Apache OFBiz.
This issue affects Apache OFBiz: before 24.09.06.
Users are recommended to upgrade to version 24.09.06, which fixes the issue. |
| Access of resource using incompatible type ('type confusion') in Microsoft Office Word allows an unauthorized attacker to execute code locally. |
| ws is an open source WebSocket client and server for Node.js. Prior to 8.20.1, the websocket.close() implementation is vulnerable to uninitialized memory disclosure when a TypedArray is passed as the reason argument. This vulnerability is fixed in 8.20.1. |
| Improper neutralization of special elements used in an LDAP query ('LDAP injection') vulnerability in Legion of the Bouncy Castle Inc. BC-JAVA bcprov on all (prov modules).
This vulnerability is associated with program files LDAPStoreHelper.
This issue affects BC-JAVA: from 1.74 before 1.80.2, from 1.81 before 1.81.1, from 1.82 before 1.84. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Reinit dev->spinlock between attachments to low-level drivers
`struct comedi_device` is the main controlling structure for a COMEDI
device created by the COMEDI subsystem. It contains a member `spinlock`
containing a spin-lock that is initialized by the COMEDI subsystem, but
is reserved for use by a low-level driver attached to the COMEDI device
(at least since commit 25436dc9d84f ("Staging: comedi: remove RT
code")).
Some COMEDI devices (those created on initialization of the COMEDI
subsystem when the "comedi.comedi_num_legacy_minors" parameter is
non-zero) can be attached to different low-level drivers over their
lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in
inconsistent lock states being reported when there is a mismatch in the
spin-lock locking levels used by each low-level driver to which the
COMEDI device has been attached. Fix it by reinitializing
`dev->spinlock` before calling the low-level driver's `attach` function
pointer if `CONFIG_LOCKDEP` is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
We observe spurious "Synchronous External Abort" exceptions
(ESR=0x96000010) and kernel crashes on Monaco-based platforms.
These faults are caused by the kernel inadvertently accessing
hypervisor-owned memory that is not properly marked as reserved.
>From boot log, The Qualcomm hypervisor reports the memory range
at 0x91a80000 of size 0x80000 (512 KiB) as hypervisor-owned:
qhee_hyp_assign_remove_memory: 0x91a80000/0x80000 -> ret 0
However, the EFI memory map provided by firmware only reserves the
subrange 0x91a40000–0x91a87fff (288 KiB). The remaining portion
(0x91a88000–0x91afffff) is incorrectly reported as conventional
memory (from efi debug):
efi: 0x000091a40000-0x000091a87fff [Reserved...]
efi: 0x000091a88000-0x0000938fffff [Conventional...]
As a result, the allocator may hand out PFNs inside the hypervisor
owned region, causing fatal aborts when the kernel accesses those
addresses.
Add a reserved-memory carveout for the Gunyah hypervisor metadata
at 0x91a80000 (512 KiB) and mark it as no-map so Linux does not
map or allocate from this area.
For the record:
Hyp version: gunyah-e78adb36e debug (2025-11-17 05:38:05 UTC)
UEFI Ver: 6.0.260122.BOOT.MXF.1.0.c1-00449-KODIAKLA-1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid uninit-value access in f2fs_sanity_check_node_footer
syzbot reported a f2fs bug as below:
BUG: KMSAN: uninit-value in f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520
f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520
f2fs_finish_read_bio+0xe1e/0x1d60 fs/f2fs/data.c:177
f2fs_read_end_io+0x6ab/0x2220 fs/f2fs/data.c:-1
bio_endio+0x1006/0x1160 block/bio.c:1792
submit_bio_noacct+0x533/0x2960 block/blk-core.c:891
submit_bio+0x57a/0x620 block/blk-core.c:926
blk_crypto_submit_bio include/linux/blk-crypto.h:203 [inline]
f2fs_submit_read_bio+0x12c/0x360 fs/f2fs/data.c:557
f2fs_submit_page_bio+0xee2/0x1450 fs/f2fs/data.c:775
read_node_folio+0x384/0x4b0 fs/f2fs/node.c:1481
__get_node_folio+0x5db/0x15d0 fs/f2fs/node.c:1576
f2fs_get_inode_folio+0x40/0x50 fs/f2fs/node.c:1623
do_read_inode fs/f2fs/inode.c:425 [inline]
f2fs_iget+0x1209/0x9380 fs/f2fs/inode.c:596
f2fs_fill_super+0x8f5a/0xb2e0 fs/f2fs/super.c:5184
get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694
get_tree_bdev+0x38/0x50 fs/super.c:1717
f2fs_get_tree+0x35/0x40 fs/f2fs/super.c:5436
vfs_get_tree+0xb3/0x5d0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline]
do_new_mount_fc fs/namespace.c:3763 [inline]
do_new_mount+0x885/0x1dd0 fs/namespace.c:3839
path_mount+0x7a2/0x20b0 fs/namespace.c:4159
do_mount fs/namespace.c:4172 [inline]
__do_sys_mount fs/namespace.c:4361 [inline]
__se_sys_mount+0x704/0x7f0 fs/namespace.c:4338
__x64_sys_mount+0xe4/0x150 fs/namespace.c:4338
x64_sys_call+0x39f0/0x3ea0 arch/x86/include/generated/asm/syscalls_64.h:166
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x134/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is: in f2fs_finish_read_bio(), we may access uninit data
in folio if we failed to read the data from device into folio, let's add
a check condition to avoid such issue. |
| ZITADEL is an open source identity management platform. From 2.71.11 to before 3.4.10 and 4.15.0, a vulnerability was discovered in Zitadel's LDAP identity provider implementation, which fails to properly escape user-provided usernames before incorporating them into LDAP search filters. This allows unauthenticated attackers to perform LDAP Filter Injection during the login process. While this vulnerability does not allow for a full authentication bypass, an attacker can use LDAP metacharacters (such as *, (, )) to perform blind LDAP injection. By observing the different failure (or success) responses, an attacker can systematically enumerate valid usernames and extract sensitive attribute data from the connected LDAP directory. This vulnerability is fixed in 3.4.10 and 4.15.0. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: move ext4_percpu_param_init() before ext4_mb_init()
When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the
`DOUBLE_CHECK` macro defined, the following panic is triggered:
==================================================================
EXT4-fs error (device vdc): ext4_validate_block_bitmap:423:
comm mount: bg 0: bad block bitmap checksum
BUG: unable to handle page fault for address: ff110000fa2cc000
PGD 3e01067 P4D 3e02067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W
6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none)
RIP: 0010:percpu_counter_add_batch+0x13/0xa0
Call Trace:
<TASK>
ext4_mark_group_bitmap_corrupted+0xcb/0xe0
ext4_validate_block_bitmap+0x2a1/0x2f0
ext4_read_block_bitmap+0x33/0x50
mb_group_bb_bitmap_alloc+0x33/0x80
ext4_mb_add_groupinfo+0x190/0x250
ext4_mb_init_backend+0x87/0x290
ext4_mb_init+0x456/0x640
__ext4_fill_super+0x1072/0x1680
ext4_fill_super+0xd3/0x280
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x29/0xd0
vfs_cmd_create+0x59/0xe0
__do_sys_fsconfig+0x4f6/0x6b0
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
This issue can be reproduced using the following commands:
mkfs.ext4 -F -q -b 1024 /dev/sda 5G
tune2fs -O quota,project /dev/sda
mount /dev/sda /tmp/test
With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads
and validates the block bitmap. When the validation fails,
ext4_mark_group_bitmap_corrupted() attempts to update
sbi->s_freeclusters_counter. However, this percpu_counter has not been
initialized yet at this point, which leads to the panic described above.
Fix this by moving the execution of ext4_percpu_param_init() to occur
before ext4_mb_init(), ensuring the per-CPU counters are initialized
before they are used. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: clear page->private in free_pages_prepare()
Several subsystems (slub, shmem, ttm, etc.) use page->private but don't
clear it before freeing pages. When these pages are later allocated as
high-order pages and split via split_page(), tail pages retain stale
page->private values.
This causes a use-after-free in the swap subsystem. The swap code uses
page->private to track swap count continuations, assuming freshly
allocated pages have page->private == 0. When stale values are present,
swap_count_continued() incorrectly assumes the continuation list is valid
and iterates over uninitialized page->lru containing LIST_POISON values,
causing a crash:
KASAN: maybe wild-memory-access in range [0xdead000000000100-0xdead000000000107]
RIP: 0010:__do_sys_swapoff+0x1151/0x1860
Fix this by clearing page->private in free_pages_prepare(), ensuring all
freed pages have clean state regardless of previous use. |
| In the Linux kernel, the following vulnerability has been resolved:
net: nfc: nci: Fix parameter validation for packet data
Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for
packet data") communication with nci nfc chips is not working any more.
The mentioned commit tries to fix access of uninitialized data, but
failed to understand that in some cases the data packet is of variable
length and can therefore not be compared to the maximum packet length
given by the sizeof(struct). |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "arm64: zynqmp: Add an OP-TEE node to the device tree"
This reverts commit 06d22ed6b6635b17551f386b50bb5aaff9b75fbe.
OP-TEE logic in U-Boot automatically injects a reserved-memory
node along with optee firmware node to kernel device tree.
The injection logic is dependent on that there is no manually
defined optee node. Having the node in zynqmp.dtsi effectively
breaks OP-TEE's insertion of the reserved-memory node, causing
memory access violations during runtime. |
| Lemur manages TLS certificate creation. Prior to 1.9.0, Lemur's LDAP authentication module (lemur/auth/ldap.py) constructs LDAP search filters using unsanitized user input via Python string interpolation. An authenticated LDAP user can inject LDAP filter metacharacters through the username field to manipulate group membership queries and escalate their privileges to administrator. This vulnerability is fixed in 1.9.0. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: macsmc: Initialize mutex
Initialize struct apple_smc's mutex in apple_smc_probe(). Using the
mutex uninitialized surprisingly resulted only in occasional NULL
pointer dereferences in apple_smc_read() calls from the probe()
functions of sub devices. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Add buffer to list only after successful allocation
Move `list_add_tail()` to after `dma_alloc_attrs()` succeeds when creating
internal buffers. Previously, the buffer was enqueued in `buffers->list`
before the DMA allocation. If the allocation failed, the function returned
`-ENOMEM` while leaving a partially initialized buffer in the list, which
could lead to inconsistent state and potential leaks.
By adding the buffer to the list only after `dma_alloc_attrs()` succeeds,
we ensure the list contains only valid, fully initialized buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
xfrm6_get_saddr() does not check the return value of
ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable
source address (returns -EADDRNOTAVAIL), saddr->in6 is left
uninitialized, but xfrm6_get_saddr() still returns 0 (success).
This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized
address in xfrm_state_find(), triggering KMSAN warning:
=====================================================
BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940
xfrm_state_find+0x2424/0xa940
xfrm_resolve_and_create_bundle+0x906/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
xfrm_lookup_route+0x63/0x2b0
ip_route_output_flow+0x1ce/0x270
udp_sendmsg+0x2ce1/0x3400
inet_sendmsg+0x1ef/0x2a0
__sock_sendmsg+0x278/0x3d0
__sys_sendto+0x593/0x720
__x64_sys_sendto+0x130/0x200
x64_sys_call+0x332b/0x3e70
do_syscall_64+0xd3/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable tmp.i.i created at:
xfrm_resolve_and_create_bundle+0x3e3/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
=====================================================
Fix by checking the return value of ipv6_dev_get_saddr() and propagating
the error. |
