| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in mod_proxy_cluster. The issue is that the <Directory> directive should be replaced by the <Location> directive as the former does not restrict IP/host access as `Require ip IP_ADDRESS` would suggest. This means that anyone with access to the host might send MCMP requests that may result in adding/removing/updating nodes for the balancing. However, this host should not be accessible to the public network as it does not serve the general traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in __ceph_x_decrypt()
In __ceph_x_decrypt(), a part of the buffer p is interpreted as a
ceph_x_encrypt_header, and the magic field of this struct is accessed.
This happens without any guarantee that the buffer is large enough to
hold this struct. The function parameter ciphertext_len represents the
length of the ciphertext to decrypt and is guaranteed to be at most the
remaining size of the allocated buffer p. However, this value is not
necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message
frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold
the ciphertext at its end with a ciphertext_len of 8 or less, can
trigger an out-of-bounds memory access when accessing hdr->magic.
This patch fixes the issue by adding a check to ensure that the
decrypted plaintext in the buffer is large enough to represent at least
the ceph_x_encrypt_header. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in osdmap_decode()
When decoding osd_state and osd_weight from an incoming osdmap in
osdmap_decode(), both are decoded for each osd, i.e., map->max_osd
times. The ceph_decode_need() check only accounts for
sizeof(*map->osd_weight) once. This can potentially result in an
out-of-bounds memory access if the incoming message is corrupted such
that the max_osd value exceeds the actual content of the osdmap message.
This patch fixes the issue by changing the corresponding part in the
ceph_decode_need() check to account for
map->max_osd*sizeof(*map->osd_weight). |
| In the Linux kernel, the following vulnerability has been resolved:
virt: sev-guest: Do not use host-controlled page order in cleanup path
When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST),
get_ext_report() allocates a buffer to retrieve a certificate blob from the
host, keeping track of its size in report_req->certs_len.
However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating
an invalid buffer size, as well as the expected length of such buffer.
get_ext_report() subsequently updates report_req->certs_len with the
host-controlled value, and cleans up the buffer by computing a page order
from such value. This is incorrect, as the host-provided length may not
match the page order of the original allocation, potentially resulting
in corruption in the page allocator.
Fix this by using alloc_pages_exact() instead, and reusing @npages to
compute the size passed to free_pages_exact(). For consistency, also
use @npages to compute the size when allocating the pages, even though
this last change has no functional effect. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure
When ttm_tt_swapout() fails, the current code calls
ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()
to restore the resource's bulk_move membership.
However, ttm_resource_move_to_lru_tail() places the resource at the tail
of the LRU list which, relative to the walk cursor's hitch node (placed
immediately after the resource when it was yielded), puts the resource
*in front of the* the hitch. The next list_for_each_entry_continue() from
the hitch finds the same resource again, causing an infinite loop.
Fix by deferring del_bulk_move to the success path only.
On the success path, TTM_TT_FLAG_SWAPPED has just been set by
ttm_tt_swapout() but the resource is still tracked in the bulk_move range,
so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would
incorrectly skip the removal. Introduce
ttm_resource_del_bulk_move_unevictable() which bypasses that guard. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: 3ad: implement proper RCU rules for port->aggregator
syzbot found a data-race in bond_3ad_get_active_agg_info /
bond_3ad_state_machine_handler [1] which hints at lack of proper
RCU implementation.
Add __rcu qualifier to port->aggregator, and add proper RCU API.
[1]
BUG: KCSAN: data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler
write to 0xffff88813cf5c4b0 of 8 bytes by task 36 on cpu 0:
ad_port_selection_logic drivers/net/bonding/bond_3ad.c:1659 [inline]
bond_3ad_state_machine_handler+0x9d5/0x2d60 drivers/net/bonding/bond_3ad.c:2569
process_one_work kernel/workqueue.c:3302 [inline]
process_scheduled_works+0x4f0/0x9c0 kernel/workqueue.c:3385
worker_thread+0x58a/0x780 kernel/workqueue.c:3466
kthread+0x22a/0x280 kernel/kthread.c:436
ret_from_fork+0x146/0x330 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
read to 0xffff88813cf5c4b0 of 8 bytes by task 22063 on cpu 1:
__bond_3ad_get_active_agg_info drivers/net/bonding/bond_3ad.c:2858 [inline]
bond_3ad_get_active_agg_info+0x8c/0x230 drivers/net/bonding/bond_3ad.c:2881
bond_fill_info+0xe0f/0x10f0 drivers/net/bonding/bond_netlink.c:853
rtnl_link_info_fill net/core/rtnetlink.c:906 [inline]
rtnl_link_fill+0x1d7/0x4e0 net/core/rtnetlink.c:927
rtnl_fill_ifinfo+0xf8e/0x1380 net/core/rtnetlink.c:2168
rtmsg_ifinfo_build_skb+0x11c/0x1b0 net/core/rtnetlink.c:4453
rtmsg_ifinfo_event net/core/rtnetlink.c:4486 [inline]
rtmsg_ifinfo+0x6d/0x110 net/core/rtnetlink.c:4495
__dev_notify_flags+0x76/0x390 net/core/dev.c:9790
netif_change_flags+0xac/0xd0 net/core/dev.c:9823
do_setlink+0x905/0x2950 net/core/rtnetlink.c:3180
rtnl_group_changelink net/core/rtnetlink.c:3813 [inline]
__rtnl_newlink net/core/rtnetlink.c:3981 [inline]
rtnl_newlink+0xf55/0x1400 net/core/rtnetlink.c:4109
rtnetlink_rcv_msg+0x64b/0x720 net/core/rtnetlink.c:6995
netlink_rcv_skb+0x123/0x220 net/netlink/af_netlink.c:2550
rtnetlink_rcv+0x1c/0x30 net/core/rtnetlink.c:7022
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5a8/0x680 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x5c8/0x6f0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:787 [inline]
__sock_sendmsg net/socket.c:802 [inline]
____sys_sendmsg+0x563/0x5b0 net/socket.c:2698
___sys_sendmsg+0x195/0x1e0 net/socket.c:2752
__sys_sendmsg net/socket.c:2784 [inline]
__do_sys_sendmsg net/socket.c:2789 [inline]
__se_sys_sendmsg net/socket.c:2787 [inline]
__x64_sys_sendmsg+0xd4/0x160 net/socket.c:2787
x64_sys_call+0x194c/0x3020 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x12c/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x0000000000000000 -> 0xffff88813cf5c400
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 22063 Comm: syz.0.31122 Tainted: G W syzkaller #0 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: netem: fix queue limit check to include reordered packets
The queue limit check in netem_enqueue() uses q->t_len which only
counts packets in the internal tfifo. Packets placed in sch->q by
the reorder path (__qdisc_enqueue_head) are not counted, allowing
the total queue occupancy to exceed sch->limit under reordering.
Include sch->q.qlen in the limit check. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: remove sprintf usage
Replace it with scnprintf, the buffer sizes are expected to be large enough
to hold the result, no need for snprintf+overflow check.
Increase buffer size in mangle_content_len() while at it.
BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270
Write of size 1 at addr [..]
vsnprintf+0xea5/0x1270
sprintf+0xb1/0xe0
mangle_content_len+0x1ac/0x280
nf_nat_sdp_session+0x1cc/0x240
process_sdp+0x8f8/0xb80
process_invite_request+0x108/0x2b0
process_sip_msg+0x5da/0xf50
sip_help_tcp+0x45e/0x780
nf_confirm+0x34d/0x990
[..] |
| In the Linux kernel, the following vulnerability has been resolved:
udp: clear skb->dev before running a sockmap verdict
On the UDP receive path skb->dev is repurposed as dev_scratch (the
truesize/state cache set by udp_set_dev_scratch()), through the
union { struct net_device *dev; unsigned long dev_scratch; } in sk_buff.
When a UDP socket is in a sockmap, sk_data_ready is
sk_psock_verdict_data_ready(), which calls udp_read_skb() -> recv_actor()
(sk_psock_verdict_recv) to run the attached SK_SKB verdict program in softirq.
If that program calls a socket-lookup helper (bpf_sk_lookup_tcp/udp,
bpf_skc_lookup_tcp), bpf_skc_lookup() does:
if (skb->dev)
caller_net = dev_net(skb->dev);
skb->dev still holds the dev_scratch value (a non-NULL integer), so dev_net()
dereferences it as a struct net_device * and the kernel takes a general
protection fault on a non-canonical address in softirq:
Oops: general protection fault, probably for non-canonical address 0x1010000800004a0
CPU: 1 UID: 0 PID: 1406 Comm: syz.2.19 Not tainted 7.1.0-rc6 #1 PREEMPT(full)
RIP: 0010:bpf_skc_lookup net/core/filter.c:7033 [inline]
RIP: 0010:bpf_sk_lookup+0x45/0x160 net/core/filter.c:7047
Call Trace:
<IRQ>
bpf_prog_4675cb904b7071f8+0x12e/0x14e
bpf_prog_run_pin_on_cpu+0xc6/0x1f0
sk_psock_verdict_recv+0x1ba/0x350
udp_read_skb+0x31a/0x370
sk_psock_verdict_data_ready+0x2e3/0x600
__udp_enqueue_schedule_skb+0x4c8/0x650
udpv6_queue_rcv_one_skb+0x3ec/0x740
udp6_unicast_rcv_skb+0x11d/0x140
ip6_protocol_deliver_rcu+0x61e/0x950
ip6_input_finish+0xa9/0x150
NF_HOOK+0x286/0x2f0
ip6_input+0x117/0x220
NF_HOOK+0x286/0x2f0
__netif_receive_skb+0x85/0x200
process_backlog+0x374/0x9a0
__napi_poll+0x4f/0x1c0
net_rx_action+0x3b0/0x770
handle_softirqs+0x15a/0x460
do_softirq+0x57/0x80
</IRQ>
The rmem charge that dev_scratch accounted for is released by skb_recv_udp() on
dequeue, just above, so the scratch is dead by the time recv_actor() runs. Clear
skb->dev so bpf_skc_lookup() falls back to sock_net(skb->sk), which
skb_set_owner_sk_safe() set just above. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix use-after-free in zram_bvec_write_partial()
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
In vti6_tnl_lookup(), when an exact match for a tunnel fails,
the code falls back to searching for wildcard tunnels:
- Tunnels matching the packet's local address, with any remote address
wildcard remote).
- Tunnels matching the packet's remote address, with any local address
(wildcard local).
However, vti6 stores all these different types of tunnels in the same
hash table (ip6n->tnls_r_l) prone to hash collisions.
The bug is that the fallback search loops in vti6_tnl_lookup() were
missing checks to ensure that the candidate tunnel actually has
a wildcard address. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix use-after-free in metadata dst teardown
airoha_metadata_dst_free() runs metadata_dst_free() which frees the
metadata_dst with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, an use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock,
but returns the selected listener after dropping that lock without
taking a reference. rfcomm_connect_ind() then locks the listener,
queues a child socket on it, and may notify it after unlocking it.
The buggy scenario involves two paths, with each column showing the
order within that path:
rfcomm_connect_ind(): listener close:
1. Find parent in 1. close() enters
rfcomm_get_sock_by_channel() rfcomm_sock_release().
2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown()
without pinning parent. closes the listener.
3. Call lock_sock(parent) and 3. rfcomm_sock_kill()
bt_accept_enqueue(parent, unlinks and puts parent.
sk, true).
4. Read parent flags and may 4. parent can be freed.
call sk_state_change().
If close wins the race, parent can be freed before
rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the
deferred-setup callback.
Take a reference on the listener before leaving rfcomm_sk_list.lock.
After lock_sock() succeeds, recheck that it is still in BT_LISTEN
before queueing a child, cache the deferred-setup bit while the parent
is locked, and drop the reference after the last parent use.
KASAN reported a slab-use-after-free in lock_sock_nested() from
rfcomm_connect_ind(), with the freeing stack going through
rfcomm_sock_kill() and rfcomm_sock_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Fix use-after-free when processing MLD queries
When processing an MLD query, a pointer to the multicast group address
is retrieved when initially parsing the packet. This pointer is later
dereferenced without being reloaded despite the fact that the skb header
might have been reallocated following the pskb_may_pull() calls, leading
to a use-after-free [1].
Fix by copying the multicast group address when the packet is initially
parsed.
[1]
BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512)
Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118
Workqueue: mld mld_query_work
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_address_description.constprop.0 (mm/kasan/report.c:378)
print_report (mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
__mld_query_work (net/ipv6/mcast.c:1512)
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
[...]
Freed by task 118:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566)
pskb_expand_head (net/core/skbuff.c:2335)
__pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4))
__mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1))
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245) |
| Use after free in Payments in Google Chrome on Android prior to 149.0.7827.201 allowed a local attacker to potentially exploit heap corruption via physical access to the device. (Chromium security severity: High) |
| Cacti is an open source performance and fault management framework. Versions 1.2.30 and prior have missing session_regenerate_id() after login, leading to Session Fixation. session_regenerate_id() is NOT called after successful login. The login flow at auth_login.php:203-207 directly sets $_SESSION[SESS_USER_ID] without rotating the session ID. The session cookie configuration is otherwise good (httponly=true, samesite=Strict, secure=true for HTTPS at include/global.php:513-537), but these do not prevent session fixation via same-site vectors. This issue has been fixed in version 1.2.31. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
bpf_prog_test_run_skb() calls eth_type_trans() first and then uses
skb->protocol to initialize sk family and address fields for the test
run.
For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb)
even when the provided test input only contains an Ethernet header.
Reject the input earlier if the Ethernet frame carries IPv4/IPv6
EtherType but the L3 header is too short.
Fold the IPv4/IPv6 header length checks into the existing protocol
switch and return -EINVAL before accessing the network headers. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: require CAP_NET_ADMIN in target netns for unattached ioctls
/dev/ppp open is currently authorized against file->f_cred->user_ns,
while unattached administrative ioctls operate on current->nsproxy->net_ns.
As a result, a local unprivileged user can create a new user namespace
with CLONE_NEWUSER, gain CAP_NET_ADMIN only in that new user namespace,
and still issue PPPIOCNEWUNIT, PPPIOCATTACH, or PPPIOCATTCHAN against
an inherited network namespace.
Require CAP_NET_ADMIN in the user namespace that owns the target network
namespace before handling unattached PPP administrative ioctls.
This preserves normal pppd operation in the network namespace it is
actually privileged in, while rejecting the userns-only inherited-netns
case. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops
When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg,
the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the
destination register in the !fullsock / !locked_tcp_sock path.
Both macros borrow a temporary register to check is_fullsock /
is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the
ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with
a request_sock), dst_reg should be zeroed but is not, leaving the stale
ctx pointer:
- SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks
as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer,
leading to stack-out-of-bounds access in helpers like
bpf_skc_to_tcp6_sock().
- SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the
verifier believes is a SCALAR_VALUE, leaking a kernel pointer.
Fix both macros by:
- Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the
added instruction.
- Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register
restore in the !fullsock path, placed after the restore because
dst_reg == src_reg means we need src_reg intact to read ctx->temp. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: core: fix use-after-free bugs in error paths
Fix several instances of error paths in which we call
__nvmem_device_put() - which may end up freeing the underlying memory
and other resources - and then keep on using the nvmem structure. Always
put the reference to the nvmem device as the last step before returning
the error code. |
