| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in gnutls. This vulnerability occurs because gnutls performs case-sensitive comparisons of `nameConstraints` labels, specifically for `dNSName` (DNS) or `rfc822Name` (email) constraints within `excludedSubtrees` or `permittedSubtrees`. A remote attacker can exploit this by crafting a leaf certificate with casing differences in the Subject Alternative Name (SAN), leading to a policy bypass where a certificate that should be rejected is instead accepted. This could result in unauthorized access or information disclosure. |
| A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process. |
| A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service. |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| A flaw was found in libcap. A local unprivileged user can exploit a Time-of-check-to-time-of-use (TOCTOU) race condition in the `cap_set_file()` function. This allows an attacker with write access to a parent directory to redirect file capability updates to an attacker-controlled file. By doing so, capabilities can be injected into or stripped from unintended executables, leading to privilege escalation. |
| A flaw was found in GLib (Gnome Lib). This vulnerability allows a remote attacker to cause heap corruption, leading to a denial of service or potential code execution via a buffer-underflow in the GVariant parser when processing maliciously crafted input strings. |
| A flaw was found in glib. This vulnerability allows a heap buffer overflow and denial-of-service (DoS) via an integer overflow in GLib's GIO (GLib Input/Output) escape_byte_string() function when processing malicious file or remote filesystem attribute values. |
| A flaw was found in rsync. It could allow a server to enumerate the contents of an arbitrary file from the client's machine. This issue occurs when files are being copied from a client to a server. During this process, the rsync server will send checksums of local data to the client to compare with in order to determine what data needs to be sent to the server. By sending specially constructed checksum values for arbitrary files, an attacker may be able to reconstruct the data of those files byte-by-byte based on the responses from the client. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: prevent NULL vif dereference in mt7925_mac_write_txwi
Check for a NULL `vif` before accessing `ieee80211_vif_is_mld(vif)` to
avoid a potential kernel panic in scenarios where `vif` might not be
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix potential deadlock in mt7925_roc_abort_sync
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix deadlock in remain-on-channel
mt76_remain_on_channel() and mt76_roc_complete() call mt76_set_channel()
while already holding dev->mutex. Since mt76_set_channel() also acquires
dev->mutex, this results in a deadlock.
Use __mt76_set_channel() instead of mt76_set_channel().
Add cancel_delayed_work_sync() for mac_work before acquiring the mutex
in mt76_remain_on_channel() to prevent a secondary deadlock with the
mac_work workqueue. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: Restrict use of RDS/IB to the initial network namespace
Prevent using RDS/IB in network namespaces other than the initial one.
The existing RDS/IB code will not work properly in non-initial network
namespaces. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix write hang in passthrough mode
The invalidate_remove() function has incomplete logic for handling write
hit bios after cache invalidation. It sets up the remapping for the
overwrite_bio but then drops it immediately without submission, causing
write operations to hang.
Fix by adding a new invalidate_committed() continuation that submits
the remapped writes to the cache origin after metadata commit completes,
while using the overwrite_endio hook to ensure proper completion
sequencing. This maintains existing coherency. Also improve error
handling in invalidate_complete() to preserve the original error status
instead of using bio_io_error() unconditionally. |
| The AI Share & Summarize WordPress plugin before 2.0.4 does not sanitise and escape some of its shortcode attributes before outputting them in a page, allowing users with the Contributor role and above to perform Stored Cross-Site Scripting attacks. |
| Multiple Shapedsmart-post-show-pro WordPress plugin before 4.0.2, Real Testimonials Pro WordPress plugin before 3.2.5, Product Slider for WooCommerce Pro WordPress plugin before 3.5.3 Pro smart-post-show-pro WordPress plugin before 4.0.2, Real Testimonials Pro WordPress plugin before 3.2.5, Product Slider for WooCommerce Pro WordPress plugin before 3.5.3 were distributed with malicious code through the vendor's compromised update server, allowing unauthenticated attackers to deploy a second-stage payload that exfiltrates credentials and other sensitive data and grants full control of affected sites. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix VM_BIND UNMAP locking
Wrong argument meant that the objs involved in UNMAP ops were not always
getting locked.
Since _NO_SHARE objs share a common resv with the VM (which is always
locked) this would only show up with non-_NO_SHARE BOs.
Patchwork: https://patchwork.freedesktop.org/patch/713898/ |
