| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NortheBridge/luminalshine is a Sunshine-compatible game stream host for Moonlight. Prior to version 26.05.0-rc4, a latent gap exists on a default install, the file at `src/platform/windows/misc.cpp` lives at `C:\ProgramData\LuminalShine\config\apps.json` and is created by the `SYSTEM` service. Under Windows' default `C:\ProgramData` inheritance, that gives `BUILTIN\Users` only Read+Execute — not writable — so the canonical EoP doesn't actually trigger on a vanilla install. Version 26.05.0-rc4 contains a patch for the issue. As a workaround, use default condition DACLs for `ProgramData`. |
| @cedar-policy/authorization-for-expressjs is an open-source Express.js middleware that integrates Cedar authorization into Express applications by mapping HTTP requests to Cedar actions and evaluating authorization policies before allowing requests to proceed. Versions prior to 0.3.0 have an issue where, under certain circumstances, the middleware matches incoming requests against Cedar action mappings using req.originalUrl, which includes the query string, while Express routes requests using only the path component. The middleware uses req.originalUrl to match incoming requests against Cedar action mappings. In Express, req.originalUrl includes the query string, while route matching uses only the path. This creates a divergence between what Cedar authorizes and what Express executes. When an application defines separate actions for overlapping path prefixes with different authorization requirements (for example, GET /users for listing all users with admin-only access, and GET /users/{id} for retrieving a single user with any authenticated user access), an actor can append a query string to bypass the more restrictive policy. Sending GET /users/?x=1 causes the middleware to match against /users/{id} (with id parameter set to ?x=1) and evaluate the less restrictive action, while Express routes the request to the /users list handler. This allows inappropriate access to the more restrictive endpoint. This issue has been addressed in version 0.30. Some workarounds are available. Validate and sanitize incoming request paths before they reach the authorization middleware. Ensure that applications do not rely solely on the middleware for authorization when defining multiple actions on overlapping path prefixes with different permission levels. |
| The Meeting Room Booking System (MRBS) is a PHP-based application for booking meeting rooms. Prior to version 1.12.2, an unauthenticated request can be made to redirect the user to a query-specified location. This allows an attacker to create a specially-crafted URL to an MRBS installation that will cause the user who clicks it to be redirected to the attacker-specified redirect URL, which could be a spoofed MRBS login page, for example. Version 1.12.2 contains a fix. No known workarounds are available. |
| The Meeting Room Booking System (MRBS) is a PHP-based application for booking meeting rooms. Prior to version 1.12.2, a user-supplied private/local URI can be made to be fetched without checks. Version 1.12.2 contains a fix. No known workarounds are available. |
| VoiceTra provided by National Institute of Information and Communications Technology (NICT) contains an incorrectly specified destination in a communication channel vulnerability. Users may be directed to a server (or service) controlled by an attacker, potentially resulting in the theft of input data or the display of incorrect results. |
| A JEXL expression sandbox bypass exists in multiple versions of OpenNMS Meridian and Horizon. A low-privileged authenticated user can submit a crafted expression to the Measurements REST API that escapes the sandbox and loads arbitrary Java classes on the server. This can potentially allow an attacker to gain access to confidential information and compromise integrity.
The solution is to upgrade to Meridian 2024.3.12, 2025.0.9 and Horizon 36.0.3 or newer. Meridian and Horizon installation instructions state that they are intended for installation within an organization's private networks and should not be directly accessible from the Internet. |
| An incorrect authorization check in the v2 Alarm REST API in OpenNMS Meridian and Horizon allows a low-privileged authenticated user (ROLE_REST) to acknowledge, escalate, or clear alarms recorded as an arbitrary username, and, when also assigned ROLE_READONLY, to modify alarm state despite the read-only restriction. A credential check that should restrict these operations is guarded by an inverted condition, so it never executes for a real (non-blank) username. This can potentially allow an attacker to compromise the integrity of alarm state and audit records.
The solution is to upgrade to Meridian 2024.3.12, 2025.0.9 and Horizon 36.0.3 or newer. Meridian and Horizon installation instructions state that they are intended for installation within an organization's private networks and should not be directly accessible from the Internet. |
| The Prevent Direct Access – Protect WordPress Files plugin for WordPress is vulnerable to unauthorized access of protected files due to insufficient token validation in the `get_advance_file_by_url()` method in all versions up to, and including, 2.8.8.8 The method uses a SQL `LIKE` operator for token lookup without escaping wildcard characters via `$wpdb->esc_like()`. This makes it possible for unauthenticated attackers to bypass the private token requirement by supplying SQL wildcard characters (such as `%`) as the token value, matching any record in the plugin's file table and downloading any protected file. |
| TTX Logger file parser crash in 4.6.0 to 4.6.7 allows denial of service |
| In the Linux kernel, the following vulnerability has been resolved:
rtase: Workaround for TX hang caused by hardware packet parsing
The hardware performs packet parsing before packet transmission.
Parsing incomplete IPv4, IPv6, TCP, or UDP headers may trigger a TX
hang because the hardware parser expects additional protocol header
data that is not present in the packet.
The hardware performs additional PTP parsing on UDP packets identified
by destination ports 319/320 at the expected UDP destination port
offset.
If such a packet has transport data smaller than RTASE_MIN_PAD_LEN,
the hardware parser expects additional packet data and may trigger a
TX hang.
To avoid these hardware issues, the driver applies the following
workarounds.
Drop malformed packets that may trigger this hardware issue before
transmission.
For IPv4 non-initial fragments, the hardware does not check the
fragment offset before parsing the expected transport header location.
As a result, these packets are still subject to transport header
parsing even though they do not contain a transport header. If the
transport data is shorter than the minimum transport header required
by the hardware parser, pad the transport data to the minimum
transport header length required by the hardware parser. Packets that
also match the hardware PTP parsing conditions continue to follow the
corresponding workaround.
For IPv6 fragmented packets, neither of the above hardware issues
occurs because the hardware only continues packet parsing when the
IPv6 Base Header Next Header field directly indicates UDP. Packets
carrying a Fragment Header do not continue through the subsequent
packet parsing stages.
For packets identified for hardware PTP parsing, pad the transport
data so it reaches RTASE_MIN_PAD_LEN before transmission. |
| In the Linux kernel, the following vulnerability has been resolved:
mac802154: hold an interface reference across the scan worker
mac802154_scan_worker() captures the scanning sub-interface under RCU
and then keeps dereferencing sdata->dev after rcu_read_unlock() and
outside the rtnl -- in the failure traces, in
mac802154_transmit_beacon_req() (skb->dev = sdata->dev), and in the
end_scan cleanup. Nothing keeps that netdev alive across the worker
iteration.
A concurrent DEL_INTERFACE or PHY removal can unregister the interface
once the worker drops the rtnl between its two drv_set_channel()
sections. unregister_netdevice() frees the netdev asynchronously from
netdev_run_todo() with the rtnl already dropped, so neither holding the
rtnl nor the per-PHY IEEE802154_IS_SCANNING flag prevents a stale worker
iteration from dereferencing the freed netdev -- a KASAN
slab-use-after-free, reachable by racing TRIGGER_SCAN against
DEL_INTERFACE (both CAP_NET_ADMIN).
Pin the netdev with netdev_hold() while the RCU read lock is still held,
and release it at every worker exit. |
| CWE-306: Missing Authentication for Critical Function |
| CWE-284: Improper Access Control |
| Improper TLS hostname verification vulnerability in Apache HttpComponents Client 5.4 or newer. HostnameVerificationPolicy#BUILTIN setting has no effect when used with the async version of HttpClient. An attacker that can intercept and modify traffic between the client and the server can impersonate the server by presenting a valid certificate for a different domain.
Please note the classic version of HttpClient is not affected by this vulnerability.
Affected users are recommended to upgrade to at least version 5.6.4, which fixes the issue. |
| The Booking for Appointments and Events Calendar WordPress plugin before 9.7 does not verify that an authenticated employee (provider) is related to the customer whose record is being accessed, allowing any employee with an Employee Panel login to read and modify the stored personal data of any customer by enumerating sequential identifiers. |
| Improper input validation in VC1 codec in libsavsvc.so prior to SMR Aug-2026 Release 1 allows local attackers to write out-of-bounds memory. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: vme_user: fix location monitor leak in tsi148 bridge
tsi148_probe() allocates a location monitor resource and links it into
tsi148_bridge->lm_resources. The probe error path frees this list, but
tsi148_remove() only frees the dma, slave and master resource lists, so
the location monitor resource is leaked on device unbind or module
unload.
Free the lm_resources list in tsi148_remove() as well, before
tsi148_bridge is freed. |
| Ixia IxVeriWave and Vector Informatik BLF file parser crashes in 4.6.0 to 4.6.7 allows denial of service on Windows |
| Mattermost versions 11.9.x <= 11.9.0, 11.8.x <= 11.8.4, 11.7.x <= 11.7.7, 10.11.x <= 10.11.22 fail to properly limit resource consumption when processing certain user-supplied input, which allows an authenticated user to cause a denial of service. Mattermost Advisory ID: MMSA-2026-00713 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn4: avoid rereading IB param length
Reuse the parameter length returned by
vcn_v4_0_enc_find_ib_param() instead of rereading it from
the IB.
This avoids a potential TOCTOU issue if the IB contents
change between reads.
(cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a) |
