| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: misc: uss720: unregister parport on probe failure
uss720_probe() registers a parport before reading the 1284 register used
to detect unsupported Belkin F5U002 adapters. If get_1284_register()
fails, the error path drops the driver private data and the USB device
reference, but leaves the parport device registered.
Leaving the port registered is more than a private allocation leak:
parport_register_port() has already reserved a parport number and
registered the parport bus device, while pp->private_data still points at
the private data that the common error path is about to release.
Undo the pre-announce registration in the get_1284_register() failure
branch before jumping to the common private-data cleanup path. Clear
priv->pp first, matching the disconnect path and avoiding a stale pointer
in the private data.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: iowarrior: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
| In the Linux kernel, the following vulnerability has been resolved:
USB: iowarrior: fix use-after-free on disconnect
Submitted write URBs are not stopped on close() and therefore need to be
stopped unconditionally on disconnect() to avoid use-after-free in the
completion handler. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: idmouse: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is
non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: udc: Fix use-after-free in gadget_match_driver
The udc structure acts as the management structure for the gadget,
but their lifecycles are decoupled. A race condition exists where
usb_del_gadget() frees the udc memory (e.g., via mode-switch work)
while gadget_match_driver() concurrently accesses the freed udc memory
(e.g., via configfs), causing a Use-After-Free (UAF) that triggers a
NULL pointer dereference when the freed memory is zeroed:
[39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140
[39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60
...
[39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8
[39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140
[39430.931308][ T1171] configfs_write_iter+0xec/0x134
[39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode
[39430.957287][ T1171] dwc3_gadget_exit+0x34/0x8c
[39430.957304][ T1171] __dwc3_set_mode+0xc0/0x664
Fix this by ensuring the udc structure remains allocated until the
gadget is released. To achieve this, introduce a new
usb_gadget_release() routine to the core. When the gadget is added,
usb_add_gadget() stores the gadget's release routine in the udc
structure and takes a reference to the udc. When the gadget is
released, usb_gadget_release() drops the reference to the udc and
then calls the gadget's release routine. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Validate BTF repeated field counts before expansion
btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD,
and btf_repeat_fields() expands repeatable fields from array elements
into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields().
The remaining-capacity check performs the expanded field count calculation
in u32. A malformed BTF can wrap that calculation, causing the check to
pass even when the expanded field count exceeds the scratch array
capacity. The following memcpy() can then write past the end of the
array.
Use checked addition and multiplication before copying repeated fields
and reject impossible counts. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers
Syzbot reported a hung task in nilfs_transaction_begin() where multiple
tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds
waiting to acquire ns_segctor_sem for read:
INFO: task syz.0.17:5918 blocked for more than 143 seconds.
Call Trace:
schedule+0x164/0x360
rwsem_down_read_slowpath+0x6d9/0x940
down_read+0x99/0x2e0
nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221
nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921
notify_change+0xc1a/0xf40
chmod_common+0x273/0x4a0
do_fchmodat+0x12d/0x230
The writer holding ns_segctor_sem was a concurrent
NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting
per-element warnings from nilfs_sufile_updatev():
__nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78
nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186
nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline]
nilfs_free_segments fs/nilfs2/segment.c:1140 [inline]
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline]
nilfs_segctor_do_construct+0x1f55/0x76c0
nilfs_clean_segments+0x3bd/0xa50
nilfs_ioctl_clean_segments fs/nilfs2/ioctl.c:922 [inline]
nilfs_ioctl+0x261f/0x2780
The root cause is that user-supplied segment numbers are not validated
before nilfs_clean_segments() begins doing work; the range check on
each segnum is performed deep inside the call chain by
nilfs_sufile_updatev(), which emits a nilfs_warn() per invalid entry
while still holding the segctor lock and the sufile mi_sem. Under load
(repeated invocations across multiple mounts saturating the global
printk path), the cumulative printk latency keeps ns_segctor_sem held
long enough to trip the hung_task watchdog, blocking concurrent
operations such as chmod() that need ns_segctor_sem for read.
Fix by validating the contents of kbufs[4] in nilfs_clean_segments()
immediately after acquiring ns_segctor_sem via nilfs_transaction_lock().
Holding ns_segctor_sem serializes the check against
nilfs_ioctl_resize(), which can modify ns_nsegments, so the validation
uses a consistent value. Out-of-range segment numbers are rejected
with -EINVAL before any segment-cleaning work begins, so the bad
entries never reach the per-element diagnostic path inside
nilfs_sufile_updatev(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appleir: fix UAF on pending key_up_timer in remove()
appleir_remove() runs hid_hw_stop() before timer_delete_sync().
hid_hw_stop() synchronously unregisters the HID input device via
hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(),
which drops the last reference and frees the underlying input_dev when
no userspace handle holds it open.
key_up_tick() reads appleir->input_dev and calls input_report_key() /
input_sync() on it. The timer is armed from appleir_raw_event() with
a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a
key was pressed shortly before the device is disconnected, the timer
can fire after hid_hw_stop() has freed input_dev but before the
teardown drains it.
A simple reorder is not sufficient. Putting the timer drain first
still leaves a window where a USB URB completion (raw_event) running
during hid_hw_stop() can call mod_timer() and re-arm the timer, which
then fires after hidinput_disconnect() has freed input_dev. The same
URB-completion window also lets raw_event() reach key_up(), key_down()
and battery_flat() directly, all of which dereference
appleir->input_dev.
Introduce a 'removing' flag on struct appleir, gated by the existing
spinlock. appleir_remove() sets the flag under the lock and then
shuts down the timer with timer_shutdown_sync(), which both drains any
in-flight callback and permanently disables further mod_timer() calls.
appleir_raw_event() and key_up_tick() bail out early if the flag is
set, so no path can arm or run the timer, or dereference
appleir->input_dev, after remove() has started tearing down.
The keyrepeat and flatbattery branches of appleir_raw_event()
previously called into the input layer without holding the spinlock;
take it now so the flag check is well-defined. This incidentally
closes a pre-existing read-side race on appleir->current_key in the
keyrepeat branch.
This bug is structurally a sibling of commit 4db2af929279 ("HID:
appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been
present since the driver was introduced. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: letsketch: fix UAF on inrange_timer at driver unbind
letsketch_driver does not provide a .remove callback, but
letsketch_probe() arms a per-device timer:
timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0);
The timer is re-armed from letsketch_raw_event() with a 100 ms
timeout on every pen-in-range report, and its callback dereferences
data->input_tablet to deliver a synthetic BTN_TOOL_PEN release.
letsketch_data is allocated with devm_kzalloc(), and its input_dev
fields are devm-allocated via letsketch_setup_input_tablet(). On
device unbind (USB unplug or rmmod), the HID core runs its default
teardown and devm cleanup frees both letsketch_data and the input
devices. Because no .remove callback exists, nothing drains the
timer first: if raw_event armed it within ~100 ms of the unbind,
the pending timer fires on freed memory. This is a UAF read of
data and of data->input_tablet, followed by input_report_key() /
input_sync() into the freed input_dev.
The same problem can occur on the probe error path: if
hid_hw_start() enabled I/O on an always-poll-quirk device and then
failed, raw_event may have armed the timer before devm releases
data.
Fix by adding a .remove callback that calls hid_hw_stop() first.
hid_hw_stop() synchronously kills the URBs that deliver raw_event(),
so once it returns no path can re-arm the timer. timer_shutdown_sync()
then drains any in-flight callback and permanently disables further
mod_timer() calls. Apply the same timer_shutdown_sync() in the probe
error path so the timer is guaranteed not to outlive data. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-goodix-spi: validate report size to prevent stack buffer overflow
goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack
buffer (tmp_buf), writing an 11-12 byte header followed by the
caller-supplied report data. The HID core caps report size at
HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set
hid_ll_driver.max_buffer_size and performs no bounds checking before
copying the payload:
memcpy(tmp_buf + tx_len, buf, len);
A hidraw SET_REPORT ioctl with a report larger than ~116 bytes
overflows the stack buffer.
Add a size check after constructing the header, rejecting reports that
would exceed the buffer capacity.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| In the Linux kernel, the following vulnerability has been resolved:
s390: Revert support for DCACHE_WORD_ACCESS
load_unaligned_zeropad() reads eight bytes from unaligned addresses and may
cross page boundaries. It handles exceptions which may happen if reading
from the second page results in an exception.
For pages which are donated to the Ultravisor for secure execution purposes
the do_secure_storage_access() exception handler however does not handle
such exceptions correctly. Such an exception may result in an endless
exception loop which will never be resolved.
An attempt to fix this [1] turned out to be not sufficient. For now revert
load_unaligned_zeropad() until this problem has been resolved in a proper
way.
Note that the implementation of load_unaligned_zeropad() itself is
correct. The revert is just a temporary workaround until there is complete
fix for secure storage access exceptions.
[1] commit b00be77302d7 ("s390/mm: Add missing secure storage access fixups for donated memory") |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: Fix hotplug-suspend race during reboot
During system reboot, cpufreq_suspend() is called via the
kernel_restart() -> device_shutdown() path. Unlike the normal system
suspend path, the reboot path does not call freeze_processes(), so
userspace processes and kernel threads remain active.
This allows CPU hotplug operations to run concurrently with
cpufreq_suspend(). The original code has no synchronization with CPU
hotplug, leading to a race condition where governor_data can be freed
by the hotplug path while cpufreq_suspend() is still accessing it,
resulting in a null pointer dereference:
Unable to handle kernel NULL pointer dereference
Call Trace:
do_kernel_fault+0x28/0x3c
cpufreq_suspend+0xdc/0x160
device_shutdown+0x18/0x200
kernel_restart+0x40/0x80
arm64_sys_reboot+0x1b0/0x200
Fix this by adding cpus_read_lock()/cpus_read_unlock() to
cpufreq_suspend() to block CPU hotplug operations while suspend is in
progress.
[ rjw: Changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT
RT migration is done aggressively. When a CPU schedules out a high
priority RT task for a lower priority task, it will look to see if there's
any RT tasks that are waiting to run on another CPU that is of higher
priority than the task this CPU is about to run. If it finds one, it will
pull that task over to the CPU and allow it to run there instead.
Normally, this pulling is done by looking at the RT overloaded mask (rto)
which contains all the CPUs in the scheduler domain with RT tasks that are
waiting to run due to a higher priority RT task currently running on their
CPU. The CPU that is about to schedule a lower priority task will grab the
rq lock of the overloaded CPU and move the RT task from that CPU's runqueue
to the local one and schedule the higher priority RT task.
This caused issues when a lot of CPUs would schedule a lower priority task
at the same time. They would all try to grab the same runqueue lock of
the CPU with the overloaded RT tasks. Only the first CPU that got in will
get that task. All the others would wait until they got the runqueue lock
and see there's nothing to pull and do nothing. On systems with lots of
CPUs, this caused a large latency (up to 500us) which is beyond what
PREEMPT_RT is to allow.
The solution to that was to create an RT_PUSH_IPI logic. When any CPU
wanted to pull a task, instead of grabbing the runqueue lock of the
overloaded CPU, it would start by sending an IPI to the overloaded CPU,
and that IPI handler would have the CPU with the waiting RT task do a push
instead. Then that handler would send an IPI to the next CPU with
overloaded RT tasks, and so on. Note, after the first CPU starts this
process, if another CPU wanted to do a pull, it would see that the process
has already begun and would only increment a counter to have the IPIs
continue again.
The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause
a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded
context on PREEMPT_RT but they can run in an interrupt context in non-RT.
If an IPI lands on a CPU that has just woken up multiple RT tasks and the
current CPU is running a non RT or a low priority RT task, instead of
doing a push, it would simply do a schedule on that CPU. But if a softirq
was also executing on this CPU, the schedule would need to wait until the
softirq finished. Until then, the CPU would still be considered overloaded
as there are RT tasks still waiting to run on it.
A live lock occurred on a workload that was doing heavy networking traffic
on a large machine where the softirqs would run 500us out of 750us. And it
would also be waking up RT tasks, causing the RT pull logic to be
constantly executed.
When a softirq triggered on a CPU with RT tasks queued but not running
yet, and the other CPUs would see this CPU as being overloaded, they would
send an IPI over to it. The CPU would notice that the waiting RT tasks are
of higher priority than the currently running task and simply schedule
that CPU instead. But because the softirq was executing, before it could
schedule, it would receive another IPI to do the same. The amount of IPIs
would slow down the currently running softirq so much that before it could
return back to task context, it would execute another softirq never
allowing the CPU to schedule. This live locked that CPU.
As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if
PREEMPT_RT is not enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (FD links)
proc_pid_get_link() and proc_pid_readlink() currently look up the task from
the pid once, then do the ptrace access check on that task, then look up
the task from the pid a second time to do the actual access.
That's racy in several ways.
To fix it, pass the task to the ->proc_get_link() handler, and instead of
proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that
looks up and locks the task, does the access check, and calls
->proc_get_link(). |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: fix device reference leak in firmware_upload_register()
firmware_upload_register()
-> fw_create_instance()
-> device_initialize()
After fw_create_instance() succeeds, the lifetime of the embedded struct
device is expected to be managed through the device core reference
counting, since fw_create_instance() has already called
device_initialize().
In firmware_upload_register(), if alloc_lookup_fw_priv() fails after
fw_create_instance() succeeds, the code reaches free_fw_sysfs and frees
fw_sysfs directly instead of releasing the device reference with
put_device(). This may leave the reference count of the embedded struct
device unbalanced, resulting in a refcount leak.
The issue was identified by a static analysis tool I developed and
confirmed by manual review. Fix this by using put_device(fw_dev) in the
failure path and letting fw_dev_release() handle the final cleanup,
instead of freeing the instance directly from the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: qcom-cpufreq-hw: Fix possible double free
qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an
array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to
one element of this array in policy->driver_data.
qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data.
This is not valid because the memory is devm-managed. For the first
domain, this can free the devm-managed allocation while the devres entry
is still active, leading to a possible double free when the platform
device is later detached. For other domains, the pointer may refer to an
element inside the array rather than the allocation base.
Remove the kfree(data) call and let devres release qcom_cpufreq.data.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs()
When a container exits, the following BUG_ON() is occasionally triggered:
==================================================================
VFS: Busy inodes after unmount of sdb (ext4)
------------[ cut here ]------------
kernel BUG at fs/super.c:695!
CPU: 3 PID: 6 Comm: containerd-shim Tainted: G OE K 6.6 #1
pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : generic_shutdown_super+0xf0/0x100
lr : generic_shutdown_super+0xf0/0x100
Call trace:
generic_shutdown_super+0xf0/0x100
kill_block_super+0x20/0x48
ext4_kill_sb+0x28/0x60
deactivate_locked_super+0x54/0x130
deactivate_super+0x84/0xa0
cleanup_mnt+0xa4/0x140
__cleanup_mnt+0x18/0x28
task_work_run+0x78/0xe0
do_notify_resume+0x204/0x240
==================================================================
The root cause is a race between cgroup_writeback_umount() and
inode_switch_wbs()/cleanup_offline_cgwb(). There is a window between
inode_prepare_wbs_switch() returning true and the subsequent
wb_queue_isw() call. Following is the process that triggers the issue:
CPU A (umount) | CPU B (writeback)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
inode_switch_wbs/cleanup_offline_cgwb
atomic_inc(&isw_nr_in_flight)
inode_prepare_wbs_switch
-> passes SB_ACTIVE check
__iget(inode)
generic_shutdown_super
sb->s_flags &= ~SB_ACTIVE
cgroup_writeback_umount(sb)
smp_mb()
atomic_read(&isw_nr_in_flight)
rcu_barrier()
-> no pending RCU callbacks
flush_workqueue(isw_wq)
-> nothing queued, returns
evict_inodes(sb)
-> Inode skipped as isw still holds a ref.
sop->put_super(sb)
/* destroys percpu counters */
-> VFS: Busy inodes after unmount!
wb_queue_isw()
queue_work(isw_wq, ...)
/* later in work function */
inode_switch_wbs_work_fn
process_inode_switch_wbs
iput() -> evict
percpu_counter_dec() // UAF!
Fix this by extending the RCU read-side critical section in
inode_switch_wbs() and cleanup_offline_cgwb() to cover from
inode_prepare_wbs_switch() through wb_queue_isw(). Since there is
no sleep in this window, rcu_read_lock() can be used. Then add a
synchronize_rcu() in cgroup_writeback_umount() before the existing
rcu_barrier(), so that all in-flight switchers that have passed the
SB_ACTIVE check have completed queue_work() before flush_workqueue()
is called.
The existing rcu_barrier() is intentionally retained so this fix can
be backported unchanged to stable kernels (5.10.y, 6.6.y, ...) that
still queue switches via queue_rcu_work(). It is a no-op on current
mainline (since commit e1b849cfa6b6 ("writeback: Avoid contention on
wb->list_lock when switching inodes")) and is removed in a follow-up
patch. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: mask server-provided mode to 07777 in modefromsid
When modefromsid is active, parse_dacl() applies the server-provided
sub_auth[2] value from the NFS mode SID to cf_mode without masking to
07777. Apply the correct masking, same as in the read path. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_open() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_open_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix query_info() replay double-free
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_query_info_init() fails before the next send,
cleanup retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
