| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: validate USB endpoints
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: use kzalloc to zero-initialize security descriptor buffer
Commit 62e7dd0a39c2d ("smb: common: change the data type of num_aces
to le16") split struct smb_acl's __le32 num_aces field into __le16
num_aces and __le16 reserved. The reserved field corresponds to Sbz2
in the MS-DTYP ACL wire format, which must be zero [1].
When building an ACL descriptor in build_sec_desc(), we are using a
kmalloc()'ed descriptor buffer and writing the fields explicitly using
le16() writes now. This never writes to the 2 byte reserved field,
leaving it as uninitialized heap data.
When the reserved field happens to contain non-zero slab garbage,
Samba rejects the security descriptor with "ndr_pull_security_descriptor
failed: Range Error", causing chmod to fail with EINVAL.
Change kmalloc() to kzalloc() to ensure the entire buffer is
zero-initialized.
[1] https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-dtyp/20233ed8-a6c6-4097-aafa-dd545ed24428 |
| An information disclosure vulnerability exists in AMD Platform Security Processor (PSP) chipset driver. The discretionary access control list (DACL) may allow low privileged users to open a handle and send requests to the driver resulting in a potential data leak from uninitialized physical pages. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: intel-dg: Fix accessing regions before setting nregions
The regions array is counted by nregions, but it's set only after
accessing it:
[] UBSAN: array-index-out-of-bounds in drivers/mtd/devices/mtd_intel_dg.c:750:15
[] index 0 is out of range for type '<unknown> [*]'
Fix it by also fixing an undesired behavior: the loop silently ignores
ENOMEM and continues setting the other entries. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
When a standalone IPv6 nexthop object is created with a loopback device
(e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies
it as a reject route. This is because nexthop objects have no destination
prefix (fc_dst=::), causing fib6_is_reject() to match any loopback
nexthop. The reject path skips fib_nh_common_init(), leaving
nhc_pcpu_rth_output unallocated. If an IPv4 route later references this
nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and
panics.
Simplify the check in fib6_nh_init() to only match explicit reject
routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback
promotion heuristic in fib6_is_reject() is handled separately by
ip6_route_info_create_nh(). After this change, the three cases behave
as follows:
1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"):
RTF_REJECT is set, enters reject path, skips fib_nh_common_init().
No behavior change.
2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. ip6_route_info_create_nh() still promotes it to reject
afterward. nhc_pcpu_rth_output is allocated but unused, which is
harmless.
3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"):
RTF_REJECT is not set, takes normal path, fib_nh_common_init() is
called. nhc_pcpu_rth_output is properly allocated, fixing the crash
when IPv4 routes reference this nexthop. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: don't zero the entire extent if EXT4_EXT_DATA_PARTIAL_VALID1
When allocating initialized blocks from a large unwritten extent, or
when splitting an unwritten extent during end I/O and converting it to
initialized, there is currently a potential issue of stale data if the
extent needs to be split in the middle.
0 A B N
[UUUUUUUUUUUU] U: unwritten extent
[--DDDDDDDD--] D: valid data
|<- ->| ----> this range needs to be initialized
ext4_split_extent() first try to split this extent at B with
EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but
ext4_split_extent_at() failed to split this extent due to temporary lack
of space. It zeroout B to N and mark the entire extent from 0 to N
as written.
0 A B N
[WWWWWWWWWWWW] W: written extent
[SSDDDDDDDDZZ] Z: zeroed, S: stale data
ext4_split_extent() then try to split this extent at A with
EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and left
a stale written extent from 0 to A.
0 A B N
[WW|WWWWWWWWWW]
[SS|DDDDDDDDZZ]
Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at()
when splitting at B, don't convert the entire extent to written and left
it as unwritten after zeroing out B to N. The remaining work is just
like the standard two-part split. ext4_split_extent() will pass the
EXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for the
second time, allowing it to properly handle the split. If the split is
successful, it will keep extent from 0 to A as unwritten. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
cros_typec_register_thunderbolt() missed initializing the `adata->lock`
mutex. This leads to a NULL dereference when the mutex is later
acquired (e.g. in cros_typec_altmode_work()).
Initialize the mutex in cros_typec_register_thunderbolt() to fix the
issue. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Reinit dev->spinlock between attachments to low-level drivers
`struct comedi_device` is the main controlling structure for a COMEDI
device created by the COMEDI subsystem. It contains a member `spinlock`
containing a spin-lock that is initialized by the COMEDI subsystem, but
is reserved for use by a low-level driver attached to the COMEDI device
(at least since commit 25436dc9d84f ("Staging: comedi: remove RT
code")).
Some COMEDI devices (those created on initialization of the COMEDI
subsystem when the "comedi.comedi_num_legacy_minors" parameter is
non-zero) can be attached to different low-level drivers over their
lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in
inconsistent lock states being reported when there is a mismatch in the
spin-lock locking levels used by each low-level driver to which the
COMEDI device has been attached. Fix it by reinitializing
`dev->spinlock` before calling the low-level driver's `attach` function
pointer if `CONFIG_LOCKDEP` is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: macsmc: Initialize mutex
Initialize struct apple_smc's mutex in apple_smc_probe(). Using the
mutex uninitialized surprisingly resulted only in occasional NULL
pointer dereferences in apple_smc_read() calls from the probe()
functions of sub devices. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: ipmb: initialise event handler read bytes
IPMB doesn't use i2c reads, but the handler needs to set a value.
Otherwise an i2c read will return an uninitialised value from the bus
driver. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: fix WARNING in rds_conn_connect_if_down
If connection isn't established yet, get_mr() will fail, trigger connection after
get_mr(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak
When processing Router Advertisements with user options the kernel
builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct
has three padding fields that are never zeroed and can leak kernel data
The fix is simple, just zeroes the padding fields. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg-prueth: fix missing data copy and wrong recycle in ZC RX dispatch
emac_dispatch_skb_zc() allocates a new skb via napi_alloc_skb() but
never copies the packet data from the XDP buffer into it. The skb is
passed up the stack containing uninitialized heap memory instead of
the actual received packet, leaking kernel heap contents to userspace.
Copy the received packet data from the XDP buffer into the skb using
skb_copy_to_linear_data().
Additionally, remove the skb_mark_for_recycle() call since the skb is
backed by the NAPI page frag allocator, not page_pool. Marking a
non-page_pool skb for recycle causes the free path to return pages to
a page_pool that does not own them, corrupting page_pool state.
The non-ZC path (emac_rx_packet) does not have these issues because it
uses napi_build_skb() to wrap the existing page_pool page directly,
requiring no copy, and correctly marks for recycle since the page comes
from page_pool_dev_alloc_pages(). |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: some missing initializations on replay
In several places in the code, we have a label to signify
the start of the code where a request can be replayed if
necessary. However, some of these places were missing the
necessary reinitializations of certain local variables
before replay.
This change makes sure that these variables get initialized
after the label. |
| In Exim before 4.99.2, when the SPA authentication driver is used with an adversarial SPA resource, there can be an out-of-bounds write that crashes the connection instance, or erroneous data processing that divulges data from uninitialized heap memory. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/entry: Scrub r12 register on kernel entry
Before commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"),
all entry handlers loaded r12 with the current task pointer
(lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That
commit removed TIF_ISOLATE_BP, dropping both the branch prediction
macros and the r12 load, but did not add r12 to the register clearing
sequence.
Add the missing xgr %r12,%r12 to make the register scrub consistent
across all entry points. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
In protected mode, the hypervisor maintains a separate instance of
the `kvm` structure for each VM. For non-protected VMs, this structure is
initialized from the host's `kvm` state.
Currently, `pkvm_init_features_from_host()` copies the
`KVM_ARCH_FLAG_ID_REGS_INITIALIZED` flag from the host without the
underlying `id_regs` data being initialized. This results in the
hypervisor seeing the flag as set while the ID registers remain zeroed.
Consequently, `kvm_has_feat()` checks at EL2 fail (return 0) for
non-protected VMs. This breaks logic that relies on feature detection,
such as `ctxt_has_tcrx()` for TCR2_EL1 support. As a result, certain
system registers (e.g., TCR2_EL1, PIR_EL1, POR_EL1) are not
saved/restored during the world switch, which could lead to state
corruption.
Fix this by explicitly copying the ID registers from the host `kvm` to
the hypervisor `kvm` for non-protected VMs during initialization, since
we trust the host with its non-protected guests' features. Also ensure
`KVM_ARCH_FLAG_ID_REGS_INITIALIZED` is cleared initially in
`pkvm_init_features_from_host` so that `vm_copy_id_regs` can properly
initialize them and set the flag once done. |
| In the Linux kernel, the following vulnerability has been resolved:
can: bcm: fix locking for bcm_op runtime updates
Commit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates")
added a locking for some variables that can be modified at runtime when
updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup().
Usually the RX_SETUP only handles and filters incoming traffic with one
exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is
sent when a specific RTR frame is received. Therefore the rx bcm_op uses
bcm_can_tx() which uses the bcm_tx_lock that was only initialized in
bcm_tx_setup(). Add the missing spin_lock_init() when allocating the
bcm_op in bcm_rx_setup() to handle the RTR case properly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: Don't default to -EOPNOTSUPP in rsi_mac80211_config
This triggers a WARN_ON in ieee80211_hw_conf_init and isn't the expected
behavior from the driver - other drivers default to 0 too. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix fragment node deletion to prevent buffer leak
After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"),
the list_node field is reused for both the xskb pool list and the buffer
free list, this causes a buffer leak as described below.
xp_free() checks if a buffer is already on the free list using
list_empty(&xskb->list_node). When list_del() is used to remove a node
from the xskb pool list, it doesn't reinitialize the node pointers.
This means list_empty() will return false even after the node has been
removed, causing xp_free() to incorrectly skip adding the buffer to the
free list.
Fix this by using list_del_init() instead of list_del() in all fragment
handling paths, this ensures the list node is reinitialized after removal,
allowing the list_empty() to work correctly. |
