| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: fix deadlock and link starvation in outgoing data path
The current implementation queues up new control and user packets as needed
and processes this queue down to the ldisc in the same code path.
That means that the upper and the lower layer are hard coupled in the code.
Due to this deadlocks can happen as seen below while transmitting data,
especially during ldisc congestion. Furthermore, the data channels starve
the control channel on high transmission load on the ldisc.
Introduce an additional control channel data queue to prevent timeouts and
link hangups during ldisc congestion. This is being processed before the
user channel data queue in gsm_data_kick(), i.e. with the highest priority.
Put the queue to ldisc data path into a workqueue and trigger it whenever
new data has been put into the transmission queue. Change
gsm_dlci_data_sweep() accordingly to fill up the transmission queue until
TX_THRESH_HI. This solves the locking issue, keeps latency low and provides
good performance on high data load.
Note that now all packets from a DLCI are removed from the internal queue
if the associated DLCI was closed. This ensures that no data is sent by the
introduced write task to an already closed DLCI.
BUG: spinlock recursion on CPU#0, test_v24_loop/124
lock: serial8250_ports+0x3a8/0x7500, .magic: dead4ead, .owner: test_v24_loop/124, .owner_cpu: 0
CPU: 0 PID: 124 Comm: test_v24_loop Tainted: G O 5.18.0-rc2 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x34/0x44
do_raw_spin_lock+0x76/0xa0
_raw_spin_lock_irqsave+0x72/0x80
uart_write_room+0x3b/0xc0
gsm_data_kick+0x14b/0x240 [n_gsm]
gsmld_write_wakeup+0x35/0x70 [n_gsm]
tty_wakeup+0x53/0x60
tty_port_default_wakeup+0x1b/0x30
serial8250_tx_chars+0x12f/0x220
serial8250_handle_irq.part.0+0xfe/0x150
serial8250_default_handle_irq+0x48/0x80
serial8250_interrupt+0x56/0xa0
__handle_irq_event_percpu+0x78/0x1f0
handle_irq_event+0x34/0x70
handle_fasteoi_irq+0x90/0x1e0
__common_interrupt+0x69/0x100
common_interrupt+0x48/0xc0
asm_common_interrupt+0x1e/0x40
RIP: 0010:__do_softirq+0x83/0x34e
Code: 2a 0a ff 0f b7 ed c7 44 24 10 0a 00 00 00 48 c7 c7 51 2a 64 82 e8 2d
e2 d5 ff 65 66 c7 05 83 af 1e 7e 00 00 fb b8 ff ff ff ff <49> c7 c2 40 61
80 82 0f bc c5 41 89 c4 41 83 c4 01 0f 84 e6 00 00
RSP: 0018:ffffc90000003f98 EFLAGS: 00000286
RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff82642a51 RDI: ffffffff825bb5e7
RBP: 0000000000000200 R08: 00000008de3271a8 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000030 R14: 0000000000000000 R15: 0000000000000000
? __do_softirq+0x73/0x34e
irq_exit_rcu+0xb5/0x100
common_interrupt+0xa4/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x1e/0x40
RIP: 0010:_raw_spin_unlock_irqrestore+0x2e/0x50
Code: 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 85 28 36 ff
48 89 ef e8 cd 58 36 ff 80 e7 02 74 01 fb bf 01 00 00 00 <e8> 3d 97 33 ff
65 8b 05 96 23 2b 7e 85 c0 74 03 5b 5d c3 0f 1f 44
RSP: 0018:ffffc9000020fd08 EFLAGS: 00000202
RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000
RDX: 0000000000000004 RSI: ffffffff8257fd74 RDI: 0000000000000001
RBP: ffff8880057de3a0 R08: 00000008de233000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000100 R14: 0000000000000202 R15: ffff8880057df0b8
? _raw_spin_unlock_irqrestore+0x23/0x50
gsmtty_write+0x65/0x80 [n_gsm]
n_tty_write+0x33f/0x530
? swake_up_all+0xe0/0xe0
file_tty_write.constprop.0+0x1b1/0x320
? n_tty_flush_buffer+0xb0/0xb0
new_sync_write+0x10c/0x190
vfs_write+0x282/0x310
ksys_write+0x68/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f3e5e35c15c
Code: 8b 7c 24 08 89 c5 e8 c5 ff ff ff 89 ef 89 44 24
---truncated--- |
| Inclusion of Sensitive Information in Source Code in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows a
remote attacker to gain information about valid usernames via analysis of source code. |
| Unauthenticated endpoints in the SICK ICR890-4 could allow an unauthenticated
remote attacker to retrieve sensitive information about the device via HTTP requests. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix TX deadlock when using DMA
`dmaengine_terminate_async` does not guarantee that the
`__dma_tx_complete` callback will run. The callback is currently the
only place where `dma->tx_running` gets cleared. If the transaction is
canceled and the callback never runs, then `dma->tx_running` will never
get cleared and we will never schedule new TX DMA transactions again.
This change makes it so we clear `dma->tx_running` after we terminate
the DMA transaction. This is "safe" because `serial8250_tx_dma_flush`
is holding the UART port lock. The first thing the callback does is also
grab the UART port lock, so access to `dma->tx_running` is serialized. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix dead lock for suspend and resume
When an application issues a query IOCTL while auto suspend is running,
a deadlock can occur. The query path holds dev_lock and then calls
pm_runtime_resume_and_get(), which waits for the ongoing suspend to
complete. Meanwhile, the suspend callback attempts to acquire dev_lock
and blocks, resulting in a deadlock.
Fix this by releasing dev_lock before calling pm_runtime_resume_and_get()
and reacquiring it after the call completes. Also acquire dev_lock in the
resume callback to keep the locking consistent. |
| curl 7.61.0 through 7.76.1 suffers from exposure of data element to wrong session due to a mistake in the code for CURLOPT_SSL_CIPHER_LIST when libcurl is built to use the Schannel TLS library. The selected cipher set was stored in a single "static" variable in the library, which has the surprising side-effect that if an application sets up multiple concurrent transfers, the last one that sets the ciphers will accidentally control the set used by all transfers. In a worst-case scenario, this weakens transport security significantly. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: microchip-core-qspi: don't attempt to transmit during emulated read-only dual/quad operations
The core will deal with reads by creating clock cycles itself, there's
no need to generate clock cycles by transmitting garbage data at the
driver level. Further, transmitting garbage data just bricks the transfer
since QSPI doesn't have a dedicated master-out line like MOSI in regular
SPI. I'm not entirely sure if the transfer is bricked because of the
garbage data being transmitted on the bus or because the core loses
track of whether it is supposed to be sending or receiving data. |
| Previously, a revoked 'SignatureKey' belonging to a CA was not correctly checked for revocation. Now, both the 'key' and 'key.SignatureKey' are checked for @revoked. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix missing last_unlink_trans update when removing a directory
When removing a directory we are not updating its last_unlink_trans field,
which can result in incorrect fsync behaviour in case some one fsyncs the
directory after it was removed because it's holding a file descriptor on
it.
Example scenario:
mkdir /mnt/dir1
mkdir /mnt/dir1/dir2
mkdir /mnt/dir3
sync -f /mnt
# Do some change to the directory and fsync it.
chmod 700 /mnt/dir1
xfs_io -c fsync /mnt/dir1
# Move dir2 out of dir1 so that dir1 becomes empty.
mv /mnt/dir1/dir2 /mnt/dir3/
open fd on /mnt/dir1
call rmdir(2) on path "/mnt/dir1"
fsync fd
<trigger power failure>
When attempting to mount the filesystem, the log replay will fail with
an -EIO error and dmesg/syslog has the following:
[445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650
[445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm
[445771.627912] BTRFS info (device dm-0): start tree-log replay
[445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5
[445771.629453] memcg:ffff89f400351b00
[445771.629892] aops:btree_aops [btrfs] ino:1
[445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff)
[445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8
[445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00
[445771.635029] page dumped because: eb page dump
[445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir
[445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5
[445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087
[445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160
[445771.638097] inode generation 3 transid 9 size 16 nbytes 16384
[445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0
[445771.638100] rdev 0 sequence 2 flags 0x0
[445771.638102] atime 1775744884.0
[445771.660056] ctime 1775744885.645502983
[445771.660058] mtime 1775744885.645502983
[445771.660060] otime 1775744884.0
[445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12
[445771.660064] index 0 name_len 2
[445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34
[445771.660068] location key (259 1 0) type 2
[445771.660070] transid 9 data_len 0 name_len 4
[445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34
[445771.660076] location key (257 1 0) type 2
[445771.660077] transid 9 data_len 0 name_len 4
[445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34
[445771.660079] location key (257 1 0) type 2
[445771.660080] transid 9 data_len 0 name_len 4
[445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34
[445771.660082] location key (259 1 0) type 2
[445771.660083] transid 9 data_len 0 name_len 4
[445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160
[445771.660086] inode generation 9 transid 9 size 8 nbytes 0
[445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0
[445771.660088] rdev 0 sequence 2 flags 0x0
[445771.660089] atime 1775744885.641174097
[445771.660090] ctime 1775744885.645502983
[445771.660091] mtime 1775744885.645502983
[445771.660105] otime 1775744885.641174097
[445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14
[445771.660107] index 2 name_len 4
[445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34
[445771.660109] location key (2
---truncated--- |
| Improper Authorization vulnerability in nerves-hub nerves_hub_web allows cross-organization device control via device bulk actions and device update API.
Missing authorization checks in the device bulk actions and device update API endpoints allow authenticated users to target devices belonging to other organizations and perform actions outside of their privilege level.
An attacker can select devices outside of their organization by manipulating device identifiers and perform management actions on them, such as moving them to products they control. This may allow attackers to interfere with firmware updates, access device functionality exposed by the platform, or disrupt device connectivity.
In environments where additional features such as remote console access are enabled, this could lead to full compromise of affected devices.
This issue affects nerves_hub_web: from 1.0.0 before 2.4.0. |
| NVIDIA Display Driver for Windows and Linux contains a vulnerability where an attacker could leak held driver locks. A successful exploit of this vulnerability might lead to denial of service. |
| Algernon is a small self-contained pure-Go web server. Prior to 1.17.7, the SSE event server bound to 0.0.0.0:5553 on Linux/macOS by default because the platform-dependent host default in engine/flags.go:39-46 set host = "" for non-Windows, and utils.JoinHostPort("", ":5553") resolves to ":5553". This vulnerability is fixed in 1.17.7. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: Avoid double-rtnl_lock ELP metric worker
batadv_v_elp_get_throughput() might be called when the RTNL lock is already
held. This could be problematic when the work queue item is cancelled via
cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case,
an rtnl_lock() would cause a deadlock.
To avoid this, rtnl_trylock() was used in this function to skip the
retrieval of the ethtool information in case the RTNL lock was already
held.
But for cfg80211 interfaces, batadv_get_real_netdev() was called - which
also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must
also be used instead and the lockless version __batadv_get_real_netdev()
has to be called. |
| Wine ships a .desktop file that registers itself as a MIME handler for EXE files and several other Windows executable file types. In some configurations, handling of an EXE file causes that file to be blindly executed with the permissions of the invoker. This allows escaping Flatpak and Snap sandboxes, because MIME handlers are not intended for use by code interpreters and loaders. NOTE: some parties feel that this is not a bug to be addressed in Wine, because there is no known solution that avoids a severe loss of usability (Wine could be a binfmt-misc handler, but binfmt-misc does not exist on all platforms supported by Wine). |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix invalid wait context in ctx_sched_in()
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fix deadlock in soft reset sequence
The soft reset sequence is currently executed from the threaded IRQ
handler, hence it cannot call disable_irq() which internally waits
for IRQ handlers, i.e. itself, to complete.
Use disable_irq_nosync() during a soft reset instead. |
| In Roundcube Webmail 1.6.x between 1.6.14 and 1.6.16 and 1.7.x before 1.7.1, remote image blocking was not honored for URLs pointing to local/private destinations, which may lead to information disclosure or privilege escalation via a text/html email message. |
| In Roundcube Webmail 1.6.x before 1.6.16 and 1.7.x before 1.7.1, the remote image blocking feature can be bypassed via a crafted CSS var() value in an e-mail message, which may lead to information disclosure or access-control bypass. |
| Roundcube Webmail 1.6.x before 1.6.16, and 1.7.x before 1.7.1 allows pre-authentication arbitrary file deletion via redis/memcache session poisoning bypass. |
