Total
28 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-20730 | 1 Cisco | 1 Firepower Threat Defense | 2024-11-21 | 4 Medium |
| A vulnerability in the Security Intelligence feed feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the Security Intelligence DNS feed. This vulnerability is due to incorrect feed update processing. An attacker could exploit this vulnerability by sending traffic through an affected device that should be blocked by the affected device. A successful exploit could allow the attacker to bypass device controls and successfully send traffic to devices that are expected to be protected by the affected device. | ||||
| CVE-2022-1642 | 1 Apple | 1 Swift | 2024-11-21 | 7.5 High |
| A program using swift-corelibs-foundation is vulnerable to a denial of service attack caused by a potentially malicious source producing a JSON document containing a type mismatch. This vulnerability is caused by the interaction between a deserialization mechanism offered by the Swift standard library, the Codable protocol; and the JSONDecoder class offered by swift-corelibs-foundation, which can deserialize types that adopt the Codable protocol based on the content of a provided JSON document. When a type that adopts Codable requests the initialization of a field with an integer value, the JSONDecoder class uses a type-erased container with different accessor methods to attempt and coerce a corresponding JSON value and produce an integer. In the case the JSON value was a numeric literal with a floating-point portion, JSONDecoder used different type-eraser methods during validation than it did during the final casting of the value. The checked casting produces a deterministic crash due to this mismatch. The JSONDecoder class is often wrapped by popular Swift-based web frameworks to parse the body of HTTP requests and perform basic type validation. This makes the attack low-effort: sending a specifically crafted JSON document during a request to these endpoints will cause them to crash. The attack does not have any confidentiality or integrity risks in and of itself; the crash is produced deterministically by an abort function that ensures that execution does not continue in the face of this violation of assumptions. However, unexpected crashes can lead to violations of invariants in services, so it's possible that this attack can be used to trigger error conditions that escalate the risk. Producing a denial of service may also be the goal of an attacker in itself. This issue is solved in Swift 5.6.2 for Linux and Windows. This issue was solved by ensuring that the same methods are invoked both when validating and during casting, so that no type mismatch occurs. Swift for Linux and Windows versions are not ABI-interchangeable. To upgrade a service, its owner must update to this version of the Swift toolchain, then recompile and redeploy their software. The new version of Swift includes an updated swift-corelibs-foundation package. Versions of Swift running on Darwin-based operating systems are not affected. | ||||
| CVE-2021-39131 | 1 Ced Project | 1 Ced | 2024-11-21 | 7.5 High |
| ced detects character encoding using Google’s compact_enc_det library. In ced v0.1.0, passing data types other than `Buffer` causes the Node.js process to crash. The problem has been patched in ced v1.0.0. As a workaround, before passing an argument to ced, verify it’s a `Buffer` using `Buffer.isBuffer(obj)`. | ||||
| CVE-2021-32696 | 1 Striptags Project | 1 Striptags | 2024-11-21 | 3.7 Low |
| The npm package "striptags" is an implementation of PHP's strip_tags in Typescript. In striptags before version 3.2.0, a type-confusion vulnerability can cause `striptags` to concatenate unsanitized strings when an array-like object is passed in as the `html` parameter. This can be abused by an attacker who can control the shape of their input, e.g. if query parameters are passed directly into the function. This can lead to a XSS. | ||||
| CVE-2021-32655 | 1 Nextcloud | 1 Nextcloud Server | 2024-11-21 | 3.5 Low |
| Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.11, 20.0.10, and 21.0.2, an attacker is able to convert a Files Drop link to a federated share. This causes an issue on the UI side of the sharing user. When the sharing user opens the sharing panel and tries to remove the "Create" privileges of this unexpected share, Nextcloud server would silently grant the share read privileges. The vulnerability is patched in versions 19.0.11, 20.0.10 and 21.0.2. No workarounds are known to exist. | ||||
| CVE-2021-0243 | 1 Juniper | 2 Ex4300, Junos | 2024-11-21 | 4.7 Medium |
| Improper Handling of Unexpected Data in the firewall policer of Juniper Networks Junos OS on EX4300 switches allows matching traffic to exceed set policer limits, possibly leading to a limited Denial of Service (DoS) condition. When the firewall policer discard action fails on a Layer 2 port, it will allow traffic to pass even though it exceeds set policer limits. Traffic will not get discarded, and will be forwarded even though a policer discard action is configured. When the issue occurs, traffic is not discarded as desired, which can be observed by comparing the Input bytes with the Output bytes using the following command: user@junos> monitor interface traffic Interface Link Input bytes (bps) Output bytes (bps) ge-0/0/0 Up 37425422 (82616) 37425354 (82616) <<<< egress ge-0/0/1 Up 37425898 (82616) 37425354 (82616) <<<< ingress The expected output, with input and output counters differing, is shown below: Interface Link Input bytes (bps) Output bytes (bps) ge-0/0/0 Up 342420570 (54600) 342422760 (54600) <<<< egress ge-0/0/1 Up 517672120 (84000) 342420570 (54600) <<<< ingress This issue only affects IPv4 policing. IPv6 traffic and firewall policing actions are not affected by this issue. This issue affects Juniper Networks Junos OS on the EX4300: All versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S6; 19.1 versions prior to 19.1R3-S3; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2. | ||||
| CVE-2021-0242 | 1 Juniper | 2 Ex4300, Junos | 2024-11-21 | 6.5 Medium |
| A vulnerability due to the improper handling of direct memory access (DMA) buffers on EX4300 switches on Juniper Networks Junos OS allows an attacker sending specific unicast frames to trigger a Denial of Service (DoS) condition by exhausting DMA buffers, causing the FPC to crash and the device to restart. The DMA buffer leak is seen when receiving these specific, valid unicast frames on an interface without Layer 2 Protocol Tunneling (L2PT) or dot1x configured. Interfaces with either L2PT or dot1x configured are not vulnerable to this issue. When this issue occurs, DMA buffer usage keeps increasing and the following error log messages may be observed: Apr 14 14:29:34.360 /kernel: pid 64476 (pfex_junos), uid 0: exited on signal 11 (core dumped) Apr 14 14:29:33.790 init: pfe-manager (PID 64476) terminated by signal number 11. Core dumped! The DMA buffers on the FPC can be monitored by the executing vty command 'show heap': ID Base Total(b) Free(b) Used(b) % Name -- ---------- ----------- ----------- ----------- --- ----------- 0 4a46000 268435456 238230496 30204960 11 Kernel 1 18a46000 67108864 17618536 49490328 73 Bcm_sdk 2 23737000 117440512 18414552 99025960 84 DMA buf <<<<< keeps increasing 3 2a737000 16777216 16777216 0 0 DMA desc This issue affects Juniper Networks Junos OS on the EX4300: 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R2-S8, 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S7, 18.4R3-S7; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S3, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2-S1, 20.2R3; 20.3 versions prior to 20.3R1-S1, 20.3R2. | ||||
| CVE-2024-9423 | 1 Hp | 1 Laserjet Mfp M232-m237 Printer Series Firmware | 2024-10-04 | 5.3 Medium |
| Certain HP LaserJet printers may potentially experience a denial of service when a user sends a raw JPEG file to the printer. The printer displays a “JPEG Unsupported” message which may not clear, potentially blocking queued print jobs. | ||||