| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NanoMQ contains a protocol-semantics flaw in its MQTT v5 `SUBSCRIBE` handling: if a subscription entry is missing the final 1-byte `Subscription Options` field, the broker may still accept the malformed packet and install the subscription into internal broker state. Under a specific packet-length construction, the same parser flaw also causes a 1-byte out-of-bounds read that crosses the real heap allocation boundary and is detected by ASAN as a `heap-buffer-overflow`.
If the consumed byte happens to look acceptable, NanoMQ may continue and append the malformed subscription entry into its internal `subinfol` state. In that case, a `SUBSCRIBE` packet that should be rejected by MQTT rules is instead treated as a successful subscription. Whether ASAN reports the bug does not depend on MQTT's logical `remain` boundary; it depends on whether the read crosses the real heap allocation boundary of the underlying message buffer. In other words, these are not two unrelated issues. They are two manifestations of the same parsing defect: by default, it appears as a semantic vulnerability, and under suitable input conditions, it also becomes a verifiable out-of-bounds read vulnerability. |
| xrdp is an open source RDP server. Versions 0.10.6 and prior contain a vulnerability concerning the processing of RDP Confirm Active PDU, where during the capability negotiation phase, the parser did not perform sufficient length validation for specific capability sets. A remote, unauthenticated attacker could potentially exploit this flaw by sending a specially crafted RDP packet containing malformed capability data. Due to missing bounds checks, the xrdp process may perform out-of-bounds memory reads, which can result in the termination of the service (Denial of Service). However, since xrdp forks a new process for each connection by default, an out-of-bounds read causing a process crash is unlikely to bring down the entire xrdp service. This issue has been fixed in version 0.10.6.1. |
| xrdp is an open source RDP server. Versions 0.10.6 and prior contain a vulnerability concerning the parsing of Client Security Data within the Client MCS Connect Initial PDU with GCC Conference Create Request during the connection sequence. During the initial capability and security negotiation phase, the parser fails to perform sufficient length validation for the incoming data block. A remote, unauthenticated attacker could potentially exploit this flaw by sending a specially crafted RDP packet containing malformed data. Due to missing bounds checks, the xrdp process may read a small number of bytes beyond the declared data block boundary, potentially disclosing process memory contents that could be combined with other vulnerabilities. This issue has been fixed in version 0.10.6.1. |
| libvips is a fast image processing library with low memory needs. The EXIF decoder within libvips versions before and including 8.18.1 was not verifying the range of EXIF tag groups before passing data to libexif, leading to a possible null pointer dereference and crash. This has been patched in version 8.18.2. |
| xrdp is an open source RDP server. Versions 0.10.6 and prior contain a missing bounds check in xrdp, which allows a heap-based buffer overflow when operating in vnc-any mode. The issue occurs during the handling of RFB protocol color map messages from a VNC server, where incoming color indices are not properly validated. A malicious VNC server can exploit this flaw by sending crafted messages with out-of-range values, leading to an out-of-bounds write on the heap. This memory corruption can result in a denial of service (DoS) or potentially allow remote code execution (RCE) prior to authentication. This issue has been fixed in version 0.10.6.1. |
| xrdp is an open source RDP server. Versions 0.10.6 and prior contain a heap-based buffer overflow vulnerability within the virtual channel forwarding mechanism. When forwarding data from a remote client to the internal channel server, the xrdp process utilizes a fixed-size buffer without adequate bounds checking on the incoming payload. An authenticated remote attacker can exploit this flaw by sending a specially crafted virtual channel message that exceeds the buffer capacity, leading to heap memory corruption. This may result in a denial of service or the execution of arbitrary code with the privileges of the xrdp process. This issue has been fixed in version 0.10.6.1. |
| DNG SDK versions 1.7.1 2536 and earlier are affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| HDF5 is a high-performance library and a file format specification that implements the HDF5 data model. If `H5Iget_name` is invoked on a group id with `0` for the size parameter, it will underflow when trying to place a null terminator in the buffer. This can occur if `H5Iget_name` is invoked in a way where `size` can be forced to zero, and there is important data before the `name` buffer. |
| NVIDIA TensorRT-LLM for any platform contains a vulnerability in tensor deserialization, where an attacker could cause a heap based buffer overflow. A successful exploit of this vulnerability might lead to information disclosure, data tampering, or denial of service. |
| NVIDIA TensorRT-LLM contains a vulnerability where an attacker could cause a write-what-where condition. A successful exploit of this vulnerability might lead to data tampering, denial of service, and information disclosure. |
| NVIDIA TensorRT contains a vulnerability where an attacker might cause a heap-based buffer overflow. A successful exploit of this vulnerability might lead to code execution. |
| Rsync is a file-copying tool that uses a delta-transfer algorithm to synchronize remote and local files. In versions prior to 3.4.3, the receiver-side out-of-bounds array read in rsync's recv_files() lets a malicious rsync server (or any peer acting in the sender role) deterministically crash any rsync client that pulls from it. The trigger is fully wire-protocol-level, requires no special options on the victim, and works for both rsync:// URLs and remote-shell pulls; since inc_recurse is the protocol-30+ default, any client doing a normal recursive pull against an attacker-controlled URL is exposed. A malicious server sets CF_INC_RECURSE, sends a flist whose first sorted entry is not the leading "." directory (causing parent_ndx to be set to -1), then sends a transfer record with ndx = 0 and an iflag omitting ITEM_TRANSFER, causing the receiver to read 8 bytes before the allocated pointer array and dereference the result in f_name(). The impact is crash-only: the out-of-bounds read lands in glibc mmap chunk metadata and dereferences to an unmapped low address, producing a SEGV that cannot be leveraged into an exploit (confirmed on glibc x86-64 Linux; non-glibc allocators not audited). This issue is fixed in version 3.4.3. |
| The urwid web display backend (urwid/display/web.py) generates web session identifiers (urwid_id) in Screen.start() by concatenating two random.randrange(10**9) calls that use Python's Mersenne Twister PRNG, which is not cryptographically secure. Each call consumes approximately 30 bits of PRNG state, and the Mersenne Twister internal state is approximately 19,937 bits, so an attacker who observes approximately 334 session IDs (for example via the X-Urwid-ID HTTP response header) can fully reconstruct the internal state and predict all past and future session IDs (Path B). The same identifier is also used as the filename of a FIFO created in the world-listable /tmp directory (for example /tmp/urwid375487765176907690.in), so any local user on the host can list /tmp to enumerate active session tokens directly (Path A). With a valid session ID, an attacker can read the victim's terminal screen via the polling endpoint, inject keystrokes into the victim's session (yielding OS-level code execution with the session owner's privileges if the session runs a shell), and inject exit sequences or flood the FIFO to terminate or crash the session. A prior Bandit S311 warning on this usage was suppressed with # noqa: S311 rather than fixed |
| FreeRDP before 3.28.0 (affected <=3.27.1) contains a heap-based buffer overflow in crypto_rsa_common() (libfreerdp/crypto/crypto.c). The function writes the modular-exponentiation result into the caller's output buffer via BN_bn2bin() and only afterward checks output_length > out_length, so out-of-bounds bytes are written before the bounds check. On the server side, when a client selects RDP Standard Security, the encrypted client random is decrypted into a fixed 32-byte buffer. Because the server publishes its RSA public key, an unauthenticated attacker can forge a ciphertext whose decrypted value is up to the full modulus length (e.g. 256 bytes for RSA-2048), overflowing the 32-byte heap buffer by up to ~224 attacker-controlled bytes pre-authentication, resulting in denial of service. |
| Buffer Overflow vulnerability in libjxl v.0.11.2 and before allows a local attacker to obtain sensitive information via the DecodeImageAPNG function |
| A vulnerability was found in Shibby Tomato 1.28. This vulnerability affects the function sub_42537C of the component Scheduler Name Handler. The manipulation of the argument a1 results in stack-based buffer overflow. It is possible to launch the attack remotely. This project is superseded by FreshTomato. |
| A heap overflow in the evalcommand() function (shell/ash.c) of Busybox v1.38.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted input. |
| Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability |
| Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability |
| Win32k Elevation of Privilege Vulnerability |
