| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Discourse is an open-source discussion platform. Prior to 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0, an unauthenticated attacker could send a single request with a crafted color_scheme_id (or dark_scheme_id) cookie to inject arbitrary HTML into a Discourse page. Because the cookie value was rendered into a color scheme tag without escaping, the attacker could break out of the attribute and inject a tag that bypassed Discourse's nonce-based Content Security Policy, resulting in arbitrary JavaScript execution in visitors' browsers. This issue is fixed in versions 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0. |
| Discourse is an open-source discussion platform. Prior o 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0, users who were allowed to view a group’s activity, but were not permitted to see shared drafts, could still receive shared-draft entries through the group posts and group mentions endpoints. This could disclose shared-draft topic titles and post excerpt/content, resulting in an information disclosure of unpublished draft material. This issue is fixed in versions 2026.1.6, 2026.5.2, 2026.6.1, and 2026.7.0. |
| A vulnerability exists in the interaction between a Endpoint Privilege Management (Windows Deployment) support utility and the agent's tamper protection controls. Under certain conditions, the protections applied to the utility process may not be enforced as intended. |
| The WNC-M14A2A LTE-M modem driver mishandles unsolicited %NOTIFYEV: events in on_cmd_socknotifyev() (drivers/modem/vendor_standalone/wncm14a2a.c). The response line is linearized into a fixed 40-byte stack buffer via net_buf_linearize(), which caps the copy at 39 bytes and returns out_len <= 39. The two quote-delimiter scanning loops, however, were bounded by len — the full CR/LF-delimited frame length returned by net_buf_findcrlf() — rather than by out_len.
When a %NOTIFYEV: line longer than 39 bytes contains no " within the linearized region, the loop indices p1/p2 walk past value[39] and read adjacent stack memory until a stray quote byte is found or the index reaches len. The over-read string is then passed to strncmp()/atoi()/LOG_*, and if a quote byte is found out of bounds the subsequent value[p2] = '\0' performs a single-NUL out-of-bounds stack write at an attacker-influenced offset.
The %NOTIFYEV: payload carries network-derived content (LTIME network time, SIB1 base-station system information, CSPS/RRCSTATE), so a rogue cellular base station, a malicious or compromised modem module, or RF manipulation that induces an over-long notify line reaches the defect without any application interaction; the handler runs automatically on the unsolicited event in the modem RX thread.
The impact is out-of-bounds stack disclosure (into logs and parsing) and stack corruption that can crash the modem RX thread (denial of service). The write offset is only weakly controlled, so memory-safe code execution is not demonstrated. The fix bounds both scanning loops by out_len, keeping all accesses within the linearized buffer. |
| The flash_copy() system call is verified by z_vrfy_flash_copy() in drivers/flash/flash_util.c. On builds with CONFIG_USERSPACE enabled, this handler is the kernel-side trust boundary for a user-mode caller. Prior to the fix it validated only the output buffer (K_SYSCALL_MEMORY_WRITE) and passed the two struct device * arguments, src_dev and dst_dev, directly into the implementation without any object validation — unlike every sibling flash syscall, which guards its device pointer with K_SYSCALL_DRIVER_FLASH.
A user-mode thread fully controls the values of src_dev/dst_dev and the contents of its own address space. The implementation z_impl_flash_copy() dereferences these pointers and calls through their driver-API function tables (e.g. api->get_parameters(dst_dev), flash_read(src_dev, ...), flash_write(dst_dev, ...)). By supplying a pointer to a forged struct device whose api table contains attacker-chosen function pointers, an unprivileged thread can cause the kernel to call arbitrary code in supervisor mode; passing any arbitrary or invalid address otherwise yields a kernel crash or out-of-bounds read.
The result is a local privilege escalation out of the userspace sandbox (with kernel denial-of-service and information disclosure as lesser outcomes). The fix adds K_SYSCALL_DRIVER_FLASH(src_dev, read) and K_SYSCALL_DRIVER_FLASH(dst_dev, write) to z_vrfy_flash_copy(), which verify each device is a registered flash-driver kernel object the calling thread is permitted to use before any dereference, closing the path completely. |
| Zephyr's 6LoWPAN IP Header Compression (IPHC) uncompression code contains an out-of-bounds read in get_ihpc_inlined_size() (subsys/net/ip/6lo.c). The destination inline size is looked up in da_inline_size_table, which has 13 entries, using an index built from the M, DAC and DAM bits of the received IPHC dispatch word (iphc & NET_6LO_IPHC_DA_MASK, a 4-bit value of 0-15). The reserved combinations 13, 14 and 15 are not bounds-checked and read past the end of the table.
The iphc word is taken directly from the received frame, and get_ihpc_inlined_size() is reached on every inbound 6LoWPAN frame via net_6lo_uncompress() from the 802.15.4 receive path (subsys/net/l2/ieee802154/ieee802154_6lo.c and ieee802154_6lo_fragment.c). An unauthenticated attacker on the radio/adjacent link can therefore craft a frame whose destination addressing-mode nibble selects an out-of-range index, with no privileges or user interaction.
The out-of-bounds value becomes the computed inline_size, which then drives header reconstruction before the buffer-length check: it is used to dereference *(pkt->buffer->data + sizeof(iphc) + inline_size) and to compute a size_t diff that can underflow, leading to a further out-of-bounds read of the packet buffer and malformed uncompression. The practical impact is a radio-triggerable out-of-bounds read / denial-of-service on the receiver; the leaked byte is not returned to the attacker. The fix rejects any destination index beyond the table, aborting processing of the malformed frame. |
| The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns.
When an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line — a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress.
The impact is an availability-only denial of service (permanent hang), reachable from an external or removable UART peer. Exploitation is gated by configuration: the error interrupt is off by default and no in-tree subsystem enables it, so only applications that explicitly call uart_irq_err_enable() on a PL011-based, interrupt-driven port are affected. The fix makes pl011_isr() acknowledge the pending error bits via uart->icr, breaking the loop, and additionally clears the latched RSR status in pl011_err_check(). |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.6, _sanitize_mustache_dict() in glances/actions.py sanitizes individual Mustache values before chevron.render(), allowing adjacent unescaped Mustache variables to reconstruct shell operators that secure_popen() executes when attacker-controlled process or container fields are rendered by an administrator-configured action template. This issue is fixed in 4.5.6. |
| openssl_encrypt versions before 1.4.0 contain hardcoded database credentials in standalone server configuration files. Attackers on the same network can access PostgreSQL databases using well-known default credentials to retrieve sensitive data. |
| openssl_encrypt versions before 1.4.0 contain a plugin sandbox bypass vulnerability where the PluginImportGuard blocks a different set of modules than the AST analyzer's DANGEROUS_MODULES set. Attackers can bypass AST analysis through string obfuscation or encoding to import unblocked dangerous modules like sys, shutil, multiprocessing, importlib, and pickle for arbitrary code execution. |
| openssl_encrypt versions before 1.4.0 contain a vulnerability in PublicKeyBundle.from_dict() that creates key bundles from untrusted data without verifying signatures. Attackers can call from_dict() followed by to_identity() without signature verification to encrypt data using attacker-controlled public keys, leaking secrets. |
| openssl_encrypt versions before 1.4.0 silently skip JSON schema validation when the jsonschema library is not installed, allowing malformed metadata to be accepted. Attackers can remove the jsonschema package or supply unknown metadata format versions to bypass all schema checks and process malicious data. |
| openssl_encrypt (pip) versions <= 1.4.7 contain an information exposure vulnerability where the 'hsm fido2-test' and 'hsm onlykey-test' diagnostic commands unconditionally print the full derived hardware pepper as hex to stdout/stderr (crypt_cli.py, handle_hsm_command). The printed value can persist in terminal scrollback, session recordings, or CI logs. Impact is limited because the pepper is derived from a random per-invocation test salt and is salt-bound, so the leaked value cannot be used to decrypt real files. A related plugin issue logged raw prf_data outside the secret-redaction path. Fixed in 1.4.8 (and 1.5.0) by removing the hex dumps and routing plugin debug output through the redaction layer. |
| SiYuan before 3.7.4 fails to properly escape workspace directory paths when constructing command-line arguments for the elevated elevator.exe helper process. Attackers can create a malicious workspace directory with command metacharacters in its path and trigger the Microsoft Defender exclusion flow to execute arbitrary commands with administrator privileges after UAC approval. |
| OpenTofu before 1.11.7 fails to validate existing symlinks in the provider cache directory during initialization. Attackers can place a malicious symlink in a trusted working directory to cause tofu init to write provider package contents to arbitrary filesystem locations outside the working tree. |
| Scriban before 7.0.0 caches TypedObjectAccessor by Type only without considering MemberFilter changes, allowing reused TemplateContext instances to expose members that should be hidden. Attackers can access filtered properties and fields by reusing a TemplateContext after tightening its MemberFilter, bypassing sandbox policies across requests or tenants. |
| Scriban before 7.0.0 contains three distinct denial-of-service vulnerabilities in expression evaluation that bypass existing safety controls through unbounded string multiplication, uncontrolled BigInteger shift operations, and LoopLimit bypass via range enumeration in builtin functions. Attackers who can supply templates can cause out-of-memory exceptions or CPU exhaustion, typically terminating the entire host process. |
| Joomla Extension - phoca.cz - Unauthenticated SQL injection via attribute filter in Phoca Cart 5.0.0-6.1.6 - The a[] (attribute) and s[] (specification) GET array parameters on Phoca Cart's public shop items page are concatenated raw into SQL WHERE clauses without parameterization or escaping. An unauthenticated attacker can inject arbitrary SQL through these parameters, enabling full database extraction via time-based blind techniques. |
| In OpenStack Ironic before 38.0.1, the autodetect deploy interface may fail to run cleaning immediately after enrollment with, or changing to, the autodetect deploy interface. |
| Kiota is an OpenAPI based HTTP Client code generator. Prior to 1.29.1 and 1.34.0, an attacker who controls or tampers with the OpenAPI description consumed by Kiota can supply a file reference that resolves outside the manifest package (e.g. ../../../../etc/passwd, an absolute path, or a file:// / http(s):// URI). When the generated manifest is deployed and consumed by an AI host, this can lead to inclusion or disclosure of files outside the intended package boundary. This vulnerability is fixed in 1.29.1 and 1.34.0. |
