Search Results (3917 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-35376 1 Uutils 1 Coreutils 2026-05-04 4.5 Medium
A Time-of-Check to Time-of-Use (TOCTOU) vulnerability exists in the chcon utility of uutils coreutils during recursive operations. The implementation resolves recursive targets using a fresh path lookup (via fts_accpath) rather than binding the traversal and label application to the specific directory state encountered during traversal. Because these operations are not anchored to file descriptors, a local attacker with write access to a directory tree can exploit timing-sensitive rename or symbolic link races to redirect a privileged recursive relabeling operation to unintended files or directories. This vulnerability breaks the hardening expectations for SELinux administration workflows and can lead to the unauthorized modification of security labels on sensitive system objects.
CVE-2026-35352 1 Uutils 1 Coreutils 2026-05-04 7 High
A Time-of-Check to Time-of-Use (TOCTOU) race condition exists in the mkfifo utility of uutils coreutils. The utility creates a FIFO and then performs a path-based chmod to set permissions. A local attacker with write access to the parent directory can swap the newly created FIFO for a symbolic link between these two operations. This redirects the chmod call to an arbitrary file, potentially enabling privilege escalation if the utility is run with elevated privileges.
CVE-2026-23110 1 Linux 1 Linux Kernel 2026-05-04 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: core: Wake up the error handler when final completions race against each other The fragile ordering between marking commands completed or failed so that the error handler only wakes when the last running command completes or times out has race conditions. These race conditions can cause the SCSI layer to fail to wake the error handler, leaving I/O through the SCSI host stuck as the error state cannot advance. First, there is an memory ordering issue within scsi_dec_host_busy(). The write which clears SCMD_STATE_INFLIGHT may be reordered with reads counting in scsi_host_busy(). While the local CPU will see its own write, reordering can allow other CPUs in scsi_dec_host_busy() or scsi_eh_inc_host_failed() to see a raised busy count, causing no CPU to see a host busy equal to the host_failed count. This race condition can be prevented with a memory barrier on the error path to force the write to be visible before counting host busy commands. Second, there is a general ordering issue with scsi_eh_inc_host_failed(). By counting busy commands before incrementing host_failed, it can race with a final command in scsi_dec_host_busy(), such that scsi_dec_host_busy() does not see host_failed incremented but scsi_eh_inc_host_failed() counts busy commands before SCMD_STATE_INFLIGHT is cleared by scsi_dec_host_busy(), resulting in neither waking the error handler task. This needs the call to scsi_host_busy() to be moved after host_failed is incremented to close the race condition.
CVE-2026-23473 1 Linux 1 Linux Kernel 2026-05-02 5.5 Medium
This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
CVE-2026-22751 2 Spring, Vmware 2 Spring Security, Spring Security 2026-05-01 4.8 Medium
Vulnerability in Spring Spring Security. Applications that explicitly configure One-Time Token login with JdbcOneTimeTokenService are vulnerable to a Time-of-check Time-of-use (TOCTOU) race condition. This issue affects Spring Security: from 6.4.0 through 6.4.15, from 6.5.0 through 6.5.9, from 7.0.0 through 7.0.4.
CVE-2026-26206 1 Wazuh 1 Wazuh 2026-04-30 6.5 Medium
Wazuh is a free and open source platform used for threat prevention, detection, and response. From version 4.0.0 to before version 4.14.4, Wazuh's server API brute-force protection for POST /security/user/authenticate can be bypassed by sending concurrent authentication requests. Although the configured threshold (max_login_attempts, default 50) is enforced correctly for sequential requests, a parallel burst allows significantly more failed login attempts to be processed before the IP block is applied. This enables an attacker to perform more password guesses than the configured policy intends (e.g., 100 attempts processed where 50 should be allowed). This issue has been patched in version 4.14.4.
CVE-2026-7351 4 Apple, Google, Linux and 1 more 4 Macos, Chrome, Linux Kernel and 1 more 2026-04-30 3.1 Low
Race in MHTML in Google Chrome prior to 147.0.7727.138 allowed an attacker who convinced a user to install a malicious extension to leak cross-origin data via a crafted Chrome Extension. (Chromium security severity: High)
CVE-2013-0266 2 Openstack, Redhat 3 Essex, Folsom, Openstack 2026-04-30 5.5 Medium
A flaw was found in the `puppetlabs-cinder` module, as used in PackStack. This vulnerability is due to incorrect file permissions, specifically world-readable permissions, on the `cinder.conf` and `api-paste.ini` configuration files. A local user can exploit this by reading these files, which leads to the disclosure of OpenStack administrative passwords. This information disclosure could allow unauthorized access to sensitive OpenStack resources.
CVE-2026-41913 1 Openclaw 1 Openclaw 2026-04-29 3.7 Low
OpenClaw before 2026.4.4 contains a race condition vulnerability in shared-secret authentication that allows concurrent asynchronous requests to bypass the per-key rate-limit budget. Attackers can exploit this by sending multiple simultaneous authentication attempts to circumvent intended rate-limiting protections on Tailscale-capable paths.
CVE-2026-32398 2 Subratamal, Wordpress 2 Terawallet For Woocommerce, Wordpress 2026-04-29 6.5 Medium
Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in Subrata Mal TeraWallet – For WooCommerce woo-wallet allows Leveraging Race Conditions.This issue affects TeraWallet – For WooCommerce: from n/a through <= 1.5.15.
CVE-2026-31514 1 Linux 1 Linux Kernel 2026-04-29 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: erofs: set fileio bio failed in short read case For file-backed mount, IO requests are handled by vfs_iocb_iter_read(). However, it can be interrupted by SIGKILL, returning the number of bytes actually copied. Unused folios in bio are unexpectedly marked as uptodate. vfs_read filemap_read filemap_get_pages filemap_readahead erofs_fileio_readahead erofs_fileio_rq_submit vfs_iocb_iter_read filemap_read filemap_get_pages <= detect signal erofs_fileio_ki_complete <= set all folios uptodate This patch addresses this by setting short read bio with an error directly.
CVE-2025-43420 1 Apple 3 Macos, Macos Sequoia, Macos Sonoma 2026-04-28 4.7 Medium
A race condition was addressed with improved state handling. This issue is fixed in macOS Sequoia 15.7.2, macOS Sonoma 14.8.2, macOS Tahoe 26.1. An app may be able to access sensitive user data.
CVE-2026-31519 1 Linux 1 Linux Kernel 2026-04-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create We have recently observed a number of subvolumes with broken dentries. ls-ing the parent dir looks like: drwxrwxrwt 1 root root 16 Jan 23 16:49 . drwxr-xr-x 1 root root 24 Jan 23 16:48 .. d????????? ? ? ? ? ? broken_subvol and similarly stat-ing the file fails. In this state, deleting the subvol fails with ENOENT, but attempting to create a new file or subvol over it errors out with EEXIST and even aborts the fs. Which leaves us a bit stuck. dmesg contains a single notable error message reading: "could not do orphan cleanup -2" 2 is ENOENT and the error comes from the failure handling path of btrfs_orphan_cleanup(), with the stack leading back up to btrfs_lookup(). btrfs_lookup btrfs_lookup_dentry btrfs_orphan_cleanup // prints that message and returns -ENOENT After some detailed inspection of the internal state, it became clear that: - there are no orphan items for the subvol - the subvol is otherwise healthy looking, it is not half-deleted or anything, there is no drop progress, etc. - the subvol was created a while ago and does the meaningful first btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much later. - after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT, which results in a negative dentry for the subvolume via d_splice_alias(NULL, dentry), leading to the observed behavior. The bug can be mitigated by dropping the dentry cache, at which point we can successfully delete the subvolume if we want. i.e., btrfs_lookup() btrfs_lookup_dentry() if (!sb_rdonly(inode->vfs_inode)->vfs_inode) btrfs_orphan_cleanup(sub_root) test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) btrfs_search_slot() // finds orphan item for inode N ... prints "could not do orphan cleanup -2" if (inode == ERR_PTR(-ENOENT)) inode = NULL; return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) on the root when it runs, so it cannot run more than once on a given root, so something else must run concurrently. However, the obvious routes to deleting an orphan when nlinks goes to 0 should not be able to run without first doing a lookup into the subvolume, which should run btrfs_orphan_cleanup() and set the bit. The final important observation is that create_subvol() calls d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if the dentry cache gets dropped, the next lookup into the subvolume will make a real call into btrfs_orphan_cleanup() for the first time. This opens up the possibility of concurrently deleting the inode/orphan items but most typical evict() paths will be holding a reference on the parent dentry (child dentry holds parent->d_lockref.count via dget in d_alloc(), released in __dentry_kill()) and prevent the parent from being removed from the dentry cache. The one exception is delayed iputs. Ordered extent creation calls igrab() on the inode. If the file is unlinked and closed while those refs are held, iput() in __dentry_kill() decrements i_count but does not trigger eviction (i_count > 0). The child dentry is freed and the subvol dentry's d_lockref.count drops to 0, making it evictable while the inode is still alive. Since there are two races (the race between writeback and unlink and the race between lookup and delayed iputs), and there are too many moving parts, the following three diagrams show the complete picture. (Only the second and third are races) Phase 1: Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set btrfs_mksubvol() lookup_one_len() __lookup_slow() d_alloc_parallel() __d_alloc() // d_lockref.count = 1 create_subvol(dentry) // doesn't touch the bit.. d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c ---truncated---
CVE-2025-24240 1 Apple 1 Macos 2026-04-28 4.7 Medium
A race condition was addressed with additional validation. This issue is fixed in macOS Sequoia 15.4, macOS Sonoma 14.7.5, macOS Ventura 13.7.5. An app may be able to access user-sensitive data.
CVE-2025-30444 1 Apple 1 Macos 2026-04-28 9.8 Critical
A race condition was addressed with improved locking. This issue is fixed in macOS Sequoia 15.4, macOS Sonoma 14.7.5, macOS Ventura 13.7.5. Mounting a maliciously crafted SMB network share may lead to system termination.
CVE-2026-31535 1 Linux 1 Linux Kernel 2026-04-28 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: smb: client: make use of smbdirect_socket.recv_io.credits.available The logic off managing recv credits by counting posted recv_io and granted credits is racy. That's because the peer might already consumed a credit, but between receiving the incoming recv at the hardware and processing the completion in the 'recv_done' functions we likely have a window where we grant credits, which don't really exist. So we better have a decicated counter for the available credits, which will be incremented when we posted new recv buffers and drained when we grant the credits to the peer.
CVE-2026-41488 2 Langchain, Langchain-ai 2 Langchain-openai, Langchain 2026-04-28 3.1 Low
LangChain is a framework for building agents and LLM-powered applications. Prior to 1.1.14, langchain-openai's _url_to_size() helper (used by get_num_tokens_from_messages for image token counting) validated URLs for SSRF protection and then fetched them in a separate network operation with independent DNS resolution. This left a TOCTOU / DNS rebinding window: an attacker-controlled hostname could resolve to a public IP during validation and then to a private/localhost IP during the actual fetch.
CVE-2026-31523 1 Linux 1 Linux Kernel 2026-04-28 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: nvme-pci: ensure we're polling a polled queue A user can change the polled queue count at run time. There's a brief window during a reset where a hipri task may try to poll that queue before the block layer has updated the queue maps, which would race with the now interrupt driven queue and may cause double completions.
CVE-2026-31516 1 Linux 1 Linux Kernel 2026-04-28 7.8 High
In the Linux kernel, the following vulnerability has been resolved: xfrm: prevent policy_hthresh.work from racing with netns teardown A XFRM_MSG_NEWSPDINFO request can queue the per-net work item policy_hthresh.work onto the system workqueue. The queued callback, xfrm_hash_rebuild(), retrieves the enclosing struct net via container_of(). If the net namespace is torn down before that work runs, the associated struct net may already have been freed, and xfrm_hash_rebuild() may then dereference stale memory. xfrm_policy_fini() already flushes policy_hash_work during teardown, but it does not synchronize policy_hthresh.work. Synchronize policy_hthresh.work in xfrm_policy_fini() as well, so the queued work cannot outlive the net namespace teardown and access a freed struct net.
CVE-2023-37867 1 Yet Another Stars Rating Project 1 Yet Another Stars Rating 2026-04-28 3.7 Low
Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in YetAnotherStarsRating.Com YASR – Yet Another Star Rating Plugin for WordPress.This issue affects YASR – Yet Another Star Rating Plugin for WordPress: from n/a through 3.3.8.