| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm passes the lockfile-controlled git resolution.commit value to git fetch without a -- separator or commit-format validation. For git dependencies fetched through the shallow-fetch path, a malicious lockfile can replace the expected 40-character commit hash with a Git option such as --upload-pack=<command>. For SSH and local transports, --upload-pack can execute the supplied command. HTTPS transports ignore --upload-pack, so the practical attack surface is primarily SSH or local git dependencies. This vulnerability is fixed in 10.34.0 and 11.4.0. |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm's patch application pipeline (@pnpm/patch-package) performs no path validation on file paths extracted from .patch files. An attacker who contributes a malicious patch file via a pull request can write attacker-controlled content to or delete arbitrary files on the filesystem during pnpm install, as the user running the install. The diff --git header paths containing ../../ sequences traverse out of the package directory, and the traversal is difficult to catch in code review because patch file diff headers are opaque to most reviewers. This vulnerability is fixed in 10.34.0 and 11.4.0. |
| pnpm is a package manager. Prior to 10.34.0 and 11.4.0, pnpm allows a transitive dependency alias from registry package metadata to contain path traversal segments. During install, pnpm later uses that alias as a filesystem path when linking dependency nodes. As a result, a registry package can cause `pnpm install --ignore-scripts` to replace paths in the current project with symlinks to attacker-controlled dependency package directories. This vulnerability is fixed in 10.34.0 and 11.4.0. |
| X.509 trust-chain bypass (path-depth exhaustion) in the OpenSSL compatibility certificate verifier (wolfSSL_X509_verify_cert()). This affects only builds with --enable-opensslextra whose application calls X509_verify_cert() with caller-supplied untrusted intermediates; for those users it is critical, otherwise the library is unaffected. Native wolfSSL TLS/DTLS usage is not impacted. X509_verify_cert() returned success based only on the last verified link rather than on reaching a trust anchor: when the supplied chain is deeper than the verifier's maximum path depth (default 100), path building runs out of depth while still walking untrusted intermediates and the chain is accepted even though it never reaches a configured trust anchor, allowing acceptance of an attacker-controlled certificate. The default TLS handshake (WOLFSSL_VERIFY_PEER) is not affected; only applications doing manual or deferred verification through this API are. |
| Horner Automation Cscape versions prior to 10.2 SP3 are vulnerable to an Out-of-Bounds Read vulnerability through parsing CSP files. Successful exploitation of this vulnerability could allow an attacker to disclose information and execute arbitrary code. |
| In AzeoTech DAQFactory versions 21.1 and prior, a Use After Free vulnerability can be exploited by an attacker using specially crafted .ctl files which can result in code execution. |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.5, the Glances KVM/QEMU monitoring engine (glances/plugins/vms/engines/virsh.py) passes VM domain names, read directly from virsh list --all output, into f-string command templates that are processed by secure_popen(). secure_popen() is explicitly designed to interpret &&, |, and > as shell operators. Because domain names are never sanitised before interpolation, any user with the ability to create or rename a KVM/QEMU virtual machine can execute arbitrary commands as the OS user running Glances — commonly root on hypervisor hosts. This vulnerability is fixed in 4.5.5. |
| Glances is an open-source system cross-platform monitoring tool. From 4.0.8 until 4.5.5, the secure_popen() function in glances/secure.py interprets > (file redirection), | (pipe), and && (command chaining) operators in command strings. These operators are applied without any validation on the target file path, piped command, or chained command. When Application Monitoring Process (AMP) modules load their command or service_cmd configuration values from glances.conf, those values are passed directly to secure_popen() with no sanitization. This allows an attacker who can modify the Glances configuration file to write arbitrary content to arbitrary filesystem paths (via >), chain arbitrary commands (via &&), or pipe command output to arbitrary programs (via |). This vulnerability is fixed in 4.5.5. |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.5, glances/outdated.py uses pickle.load() to read a version-check cache file stored at a predictable, world-accessible path (~/.cache/glances/glances-version.db or $XDG_CACHE_HOME/glances/glances-version.db). No integrity check, signature verification, or format validation is performed before deserialization. An attacker with write access to that path — through any of several realistic local or container-level scenarios — can plant a malicious pickle file and achieve arbitrary code execution as the OS user running Glances the next time it starts with version checking enabled (the default). This vulnerability is fixed in 4.5.5. |
| WebSocket endpoints lack proper authentication mechanisms, enabling attackers to impersonate charging stations. As a result, attackers can exploit this weakness to gain unauthorized access to sensitive data or perform unauthorized actions. Given that no authentication is required, this can lead to privilege escalation and potentially compromise the security of the entire system. |
| The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks or brute-force attacks to gain unauthorized access. |
| A flaw was found in Keycloak. This JWT algorithm confusion vulnerability in the JWT Authorization Grant flow allows an attacker with valid client credentials to bypass signature verification. By forging an assertion, the attacker can create unauthorized access tokens. This enables the attacker to impersonate any federated user linked to the affected Identity Provider, leading to unauthorized access and potential privilege escalation. |
| A flaw was found in Keycloak. A missing authorization check in the GroupResource.addChild() endpoint within the Admin REST API allows an authenticated user with limited administrative privileges to reparent any existing group. When Fine-Grained Admin Permissions v2 (FGAPv2) is enabled, an attacker with management rights over a single low-privilege group can reparent a highly privileged group (such as one possessing the realm-admin role) under their managed group.
Because group permissions follow a hierarchical structure, this action unauthorizedly grants the attacker management and password-reset capabilities over the members of the targeted privileged group. An attacker can exploit this to reset an administrator's password, compromise the account, and achieve a full realm takeover, leading to a complete compromise of confidentiality, integrity, and availability. |
| A flaw was found in Keycloak. A remote attacker with administrative privileges, specifically those with `manage-client` permission or access to client registration endpoints, could bypass client Uniform Resource Identifier (URI) validation. This is achieved by registering a malicious client with a specially crafted redirect URI using a case-insensitive `javascript:` or `data:` scheme. This Cross-Site Scripting (XSS) vulnerability allows for arbitrary code execution in the Keycloak origin when a victim clicks the crafted link, such as in the logout flow or the Admin Console. |
| The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests. |
| A flaw was found in Red Hat Quay and mirror registry for Red Hat OpenShift. The log export feature in these products allows an authenticated user to specify an arbitrary callback URL. A backend process then makes server-side HTTP requests to this provided URL. This vulnerability, known as Server-Side Request Forgery (SSRF), could allow an attacker to send requests from the application's internal network, potentially leading to the disclosure of sensitive information. |
| Charging station authentication identifiers are publicly accessible via web-based mapping platforms. |
| The qrscp application's C-STORE handler uses a specific instance from attacker-supplied DICOM datasets directly in os.path.join() without sanitization, allowing file writes to arbitrary paths. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: bail out on template ct in get eval
I noticed this issue while looking at a historic syzbot report [1].
A rule like the one below is enough to trigger the bug:
table ip t {
chain pre {
type filter hook prerouting priority raw;
ct zone set 1
ct original saddr 1.2.3.4 accept
}
}
The first expression attaches a per-cpu template ct via
nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all
zero, nf_ct_l3num(ct) == 0). The next expression then calls
nft_ct_get_eval() on the same skb, treats the template as a real ct
and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this
overflows past struct nft_regs on the kernel stack; with smaller
dreg values it silently clobbers adjacent registers.
Reject template ct at the eval entry and in nft_ct_get_fast_eval(),
mirroring the check nft_ct_set_eval() already has. Additionally,
bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len
instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple
before pkt_to_tuple() fills in only the protocol-relevant leading
bytes, so the trailing bytes of tuple->{src,dst}.u3.all are
well-defined zero. priv->len is validated at rule load, so the
copy size is now bounded by the destination register rather than
by an untrusted field on the conntrack.
[1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c |
| Two data sources (DICOMWebProxy and DICOMJSON) shipped in the default configuration fetch an arbitrary URL parameter without validation. A global authentication service in OHIF automatically injects the authenticated user's OIDC Bearer token into the resulting requests, sending it to the attacker-controlled server. DICOMweb data sources are not impacted. |
