| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Uncontrolled search path element issue exists in Pupsman versions prior to 3.9.0. If a crafted DLL file is placed in the same folder as the affected installer and the installer is executed, arbitrary code may be executed with SYSTEM privilege. |
| Incorrect default permissions issue exists in Pupsman versions prior to 3.9.0. An attacker can place a malicious executable in the installation folder, which results in arbitrary code execution with SYSTEM privilege |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check
An unintended behavior in the TCP conntrack state machine allows a
connection to be forced into the CLOSE state using an RST packet with an
invalid sequence number.
Specifically, after a SYN packet is observed, an RST with an invalid SEQ
can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of
whether the RST corresponds to the expected reply direction. The relevant
code path assumes the RST is a response to an outgoing SYN, but does not
validate packet direction or ensure that a matching SYN was actually sent
in the opposite direction.
As a result, a crafted packet sequence consisting of a SYN followed by an
invalid-sequence RST can prematurely terminate an active NAT entry. This
makes connection teardown easier than intended.
So, tighten the state transition logic to ensure that RST-triggered
CLOSE transitions only occur when the RST is a valid response to a
previously observed SYN in the correct direction. |
| A flaw was found in the AAP Gateway Envoy proxy configuration. The non-mTLS route to EDA event streams does not remove the Subject HTTP header from client requests, despite the source code defining requestHeadersToRemove for this header. An unauthenticated remote attacker can inject a spoofed Subject header matching a legitimate client certificate DN to bypass mTLS authentication and inject arbitrary events into protected EDA event streams. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: serialize DMABUF cancel against request completion
ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the
completed request but leaves priv->req, the back-pointer that
ffs_dmabuf_transfer() set on submission, pointing at the freed
memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or
ffs_epfile_release() on the close path still sees priv->req
non-NULL under ffs->eps_lock:
if (priv->ep && priv->req)
usb_ep_dequeue(priv->ep, priv->req);
so usb_ep_dequeue() is called on a freed usb_request.
On dummy_hcd the dequeue path only walks a live queue and
pointer-compares, so the freed pointer reads without faulting and
KASAN requires an explicit check at the FunctionFS call site to
surface the use-after-free. On SG-capable in-tree UDCs the
dequeue path dereferences the supplied request immediately:
* chipidea's ep_dequeue() does
container_of(req, struct ci_hw_req, req) and reads
hwreq->req.status before acquiring its own lock.
* cdnsp's cdnsp_gadget_ep_dequeue() reads request->status first.
The narrower option of clearing priv->req via cmpxchg() in the
completion does not close the race: the completion runs without
eps_lock, so a cancel path holding eps_lock can still observe
priv->req non-NULL, race a concurrent completion that clears and
frees, and pass the freed pointer to usb_ep_dequeue(). A slightly
longer fix that moves the free into the cleanup work is needed.
Same class of lifetime race as the recent usbip-vudc timer fix [1].
Take eps_lock in the sole place that mutates priv->req from the
callback direction by moving usb_ep_free_request() out of the
completion into ffs_dmabuf_cleanup(), the existing work handler
scheduled by ffs_dmabuf_signal_done() on
ffs->io_completion_wq. Clear priv->req there under eps_lock
before freeing, and only clear if priv->req still names our
request (a subsequent ffs_dmabuf_transfer() on the same
attachment may have queued a new one).
This keeps the existing dummy_hcd sync-dequeue invariant: the
completion callback is still invoked by the UDC without
eps_lock held (dummy_hcd drops its own lock before calling the
callback), and the callback now takes no f_fs lock at all.
Serialization against the cancel path happens in cleanup, which
runs from the workqueue with no f_fs lock held on entry.
The priv ref count protects the containing ffs_dmabuf_priv:
ffs_dmabuf_transfer() takes a ref via ffs_dmabuf_get(), cleanup
drops it via ffs_dmabuf_put(), so priv stays live for the
cleanup even after the cancel path's list_del + ffs_dmabuf_put.
The ffs_dmabuf_transfer() error path no longer frees usb_req
inline: fence->req and fence->ep are set before usb_ep_queue(),
so ffs_dmabuf_cleanup() (scheduled by the error-path
ffs_dmabuf_signal_done()) owns the free regardless of whether
the queue succeeded.
Reproduced under KASAN on both detach and close paths against
dummy_hcd with an observability hook
(kasan_check_byte(priv->req) immediately before usb_ep_dequeue)
at the two FunctionFS cancel sites to surface the stale-pointer
access; the hook is not part of this patch. The KASAN
allocator / free stacks in the captured splats identify the
same request: alloc in dummy_alloc_request, free in
dummy_timer, fault reached from ffs_epfile_release (close) and
from the FUNCTIONFS_DMABUF_DETACH ioctl (detach). With the
patch applied, both paths are silent under the same hook.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace or from a USB host on the
cable. FunctionFS mounts default to GLOBAL_ROOT_UID, but the
filesystem supports uid=, gid=, and fmode= delegation to a
non-root gadget daemon, so on real deployments the attacker may
be a less-privileged service rather than root. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an Integer overflow or wraparound vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service. |
| Dell PowerProtect Data Domain, versions 7.7.1.0 through 8.7, LTS2026 release version 8.6.1.0 through 8.6.1.10, LTS2025 release version 8.3.1.0 through 8.3.1.30, LTS2024 release versions 7.13.1.0 through 7.13.1.70 contain an improper limitation of a pathname to a restricted directory ('path traversal') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to unauthorized file modification. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix a vulnerability of integer overflow in kfd debugger
get_queue_ids() computes array_size = num_queues * sizeof(uint32_t),
which could overflow on 32-bit size_t build. using array_size()
instead, it saturates to SIZE_MAX on overflow.
(cherry picked from commit 2d57a0475f085c08b49312dfd8edcb461845f285) |
| SeaweedFS is a distributed storage system. Prior to 4.34, the S3 API gateway does not reject dot-dot path segments in the X-Amz-Copy-Source header used by CopyObject and UploadPartCopy, allowing an authenticated identity scoped to one bucket to read objects from other buckets through server-side copy. This issue is fixed in version 4.34. |
| protobufjs compiles protobuf definitions into JavaScript (JS) functions. Prior to 7.6.5 and 8.6.6, protobufjs parsed option names by advancing through schema tokens until reaching an = token without checking for end of input, so a crafted .proto schema that opens an option declaration and ends prematurely can cause parse, Root.load, or Root.loadSync to loop indefinitely. This issue is fixed in versions 7.6.5 and 8.6.6. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: add hook transactions for device deletions
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gpusvm: Fix unbalanced unlock in drm_gpusvm_scan_mm()
There is a unbalanced lock/unlock to gpusvm notifier lock:
[ 931.045868] =====================================
[ 931.046509] WARNING: bad unlock balance detected!
[ 931.047149] 6.19.0-rc6+xe-**************** #9 Tainted: G U
[ 931.048150] -------------------------------------
[ 931.048790] kworker/u5:0/51 is trying to release lock (&gpusvm->notifier_lock) at:
[ 931.049801] [<ffffffffa090c0d8>] drm_gpusvm_scan_mm+0x188/0x460 [drm_gpusvm_helper]
[ 931.050802] but there are no more locks to release!
[ 931.051463]
The drm_gpusvm_notifier_unlock() sits under err_free label and the
first jump to err_free is just before calling the
drm_gpusvm_notifier_lock() causing unbalanced unlock. |
| A weakness has been identified in itsourcecode Hospital Management System 1.0. This affects an unknown function of the file /prescriptionrecord.php. This manipulation of the argument delid causes sql injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. |
| A vulnerability was found in zevorn rt-claw up to 0.2.0. The affected element is the function claw_net_get/claw_net_post of the file claw/services/tools/net.c of the component http_request. The manipulation of the argument url results in server-side request forgery. The attack can be executed remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was found in nextlevelbuilder GoClaw up to 3.13.2. This affects the function RequestApproval of the file internal/tools/exec_approval.go of the component WebSocket Approval Endpoint. Performing a manipulation results in incorrect authorization. The attack is possible to be carried out remotely. The exploit has been made public and could be used. |
| A weakness has been identified in Sipeed PicoClaw up to 0.2.9. This impacts the function web_fetch of the file pkg/tools/integration/web.go. This manipulation causes server-side request forgery. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. Patch name: c15aac21fe05ee103a470e1104bc891754e83392. To fix this issue, it is recommended to deploy a patch. |
| A flaw has been found in AstrBotDevs AstrBot up to 4.25.5. This vulnerability affects the function OpenApiRoute.get_chat_sessions of the file astrbot/dashboard/routes/open_api.py of the component session-listing Endpoint. This manipulation of the argument Username causes authorization bypass. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| @hapi/inert provides static file and directory handlers for hapi.js. From 4.0.0 to 7.1.0, @hapi/inert serves static files from a directory configured with path in the directory or file handlers or relativeTo for h.file(), with confinement enforced by the confine option, but the confinement check compared the resolved absolute path against the confine directory using a raw string-prefix test, so a sibling directory such as /app/static-secret next to /app/static was incorrectly accepted and could allow an unauthenticated remote attacker to read files via /..%2fstatic-secret/secret.txt. This issue is fixed in version 7.1.1. |
| OpenMcdf is a fully .NET / C# library to manipulate Compound File Binary File Format files, also known as Structured Storage. In 3.1.3 and earlier, the BST name-lookup loop in DirectoryTree.TryGetDirectoryEntry (OpenMcdf/DirectoryTree.cs:35-46) walks directory entries by repeatedly calling directories.TryGetSibling(child, siblingType, validateColor). A crafted CFB file with cyclic Left/Right sibling links among directory entries, constructed so the per-step BST-order check in TryGetSibling (DirectoryEntries.cs:84-85) is satisfied at every step, drives this while (child is not null) loop forever. There is no cycle detection in TryGetDirectoryEntry, and the bug is reachable from RootStorage.OpenStorage(name), TryOpenStorage(name), OpenStream(name), and TryOpenStream(name), causing an unrecoverable denial of service. This issue is fixed in version 3.1.4. |
| dd-trace is the Datadog APM client for Node.js. Prior to 5.100.0, W3C baggage propagation in packages/dd-trace/src/baggage.js and packages/dd-trace/src/opentracing/propagation/text_map.js parsed incoming baggage HTTP headers without enforcing DD_TRACE_BAGGAGE_MAX_ITEMS or DD_TRACE_BAGGAGE_MAX_BYTES on extraction. A remote, unauthenticated attacker can send a request whose baggage header contains an arbitrarily large number of comma-separated key-value pairs, or a single very large value, causing unbounded CPU and memory consumption and enabling a remote denial of service against any HTTP service with baggage propagation enabled. This issue is fixed in version 5.100.0. |
