| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - use print_hex_dump_devel to guard key hex dumps
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() and gen_split_key() to avoid leaking secrets at runtime when
CONFIG_DYNAMIC_DEBUG is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - use print_hex_dump_devel to guard key hex dumps
Use print_hex_dump_devel() for dumping sensitive key material in
*_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG
is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: chacha20poly1305 - validate poly1305 template argument
chachapoly_create() still accepts the compatibility poly1305 parameter
in the template name, but it assumes the second template argument is
always present and immediately passes it to strcmp().
When the argument is missing, crypto_attr_alg_name() returns an error
pointer. Check for that before comparing the name so malformed template
instantiations fail with an error instead of dereferencing the error
pointer in strcmp().
This matches the surrounding Crypto API template pattern where
crypto_attr_alg_name() results are validated before string-specific use. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ecc - Fix carry overflow in vli multiplication
The carry flag calculation fails when r01.m_high is saturated
(0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows.
The condition (r01.m_high < product.m_high) doesn't handle the case
where r01.m_high == product.m_high and an additional carry exists
from lower-bit overflow.
When commit 3c4b23901a0c ("crypto: ecdh - Add ECDH software support")
introduced crypto/ecc.c, it split the muladd() function in the
micro-ecc library into separate mul_64_64() and add_128_128() helpers.
It seems the check got lost in translation.
Add proper handling for this boundary by accounting for the carry
from the lower addition. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: pcrypt - restore callback for non-parallel fallback
pcrypt installs pcrypt_aead_done() on the child AEAD request before
trying to submit it through padata. If padata_do_parallel() returns
-EBUSY, pcrypt falls back to calling the child AEAD directly.
That fallback must not keep the padata completion callback. Otherwise
an asynchronous completion runs pcrypt_aead_done() even though the
request was never enrolled in padata.
Restore the original request callback and callback data before calling
the child AEAD directly. This keeps the fallback path aligned with a
direct AEAD request while leaving the parallel path unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: loongson - Remove broken and unused loongson-rng
The loongson-rng rng_alg has several vulnerabilities, including not
providing forward security, and a use-after-free bug due to the use of
wait_for_completion_interruptible().
Meanwhile, the rng_alg framework doesn't really have any purpose in the
first place other than to access the software algorithms crypto/drbg.c
and crypto/jitterentropy.c. Hardware-specific rng_algs have no
in-kernel user, and unlike hwrng there's no feed into the actual Linux
RNG. As such, there's really no point to this code. There are of
course other rng_alg drivers that are similarly unused, but they're
similarly in the process of being phased out, e.g.
https://lore.kernel.org/r/[email protected] and
https://lore.kernel.org/r/[email protected]
Given that, there's no point in fixing forward these vulnerabilities,
and it makes much more sense to simply roll back the addition of this
driver. If this platform provides TRNG (not PRNG) functionality, it
could make sense to add a hwrng driver, but it would be quite different. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for SEV ioctls
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
sev_move_to_init_state() is called for ioctls requiring only SEV firmware:
SEV_PEK_GEN, SEV_PDH_GEN, SEV_PEK_CSR, SEV_PEK_CERT_IMPORT, and
SEV_PDH_CERT_EXPORT. After the firmware command, it does SEV_SHUTDOWN on
the SEV firmware. Since these commands do not require SNP to be
initialized, skip it by calling __sev_platform_init_locked() which only
initializes the SEV firmware. This way SNP is not Initialized at all, and
HSAVE_PA is not cleared.
The previous code saved any SEV initialization firmware error to
init_args.error and then threw it away and hardcoded the return value of
INVALID_PLATFORM_STATE regardless of the real firmware error. This patch
changes it to surface the underlying error, which is hopefully both more
useful and doesn't cause any problems.
Note that it is still safe to call __sev_firmware_shutdown() directly: it
calls __sev_snp_shutdown_locked(), which skips SNP shutdown if SNP was not
initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_COMMIT)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SNP_COMMIT command does not require the firmware to be in any
particular state. Skip initializing it if it was previously uninitialized.
The SEV-SNP firmware specification doc 56860 does not mention SNP_COMMIT in
Table 5 as a command that is allowed in the UNINIT state, but it is in fact
allowed and a future documentation update will reflect that. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_VLEK_LOAD)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
The SEV firmware docs for SNP_VLEK_LOAD note:
> On SNP_SHUTDOWN, the VLEK is deleted.
That is, the initialization/shutdown wrapper here is pointless, because the
firmware immediately throws away the key anyway. Instead, refuse to do
anything if SNP has not been previously initialized.
This is an ABI break: before, this was a no-op and almost certainly a
mistake by userspace, and now it returns -ENODEV. ABI compatibility could be
maintained here by simply returning 0 in the check instead. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Do not initialize SNP for ioctl(SNP_CONFIG)
Sashiko notes:
> if SEV initialization fails and KVM is actively running normal VMs, could a
> userspace process trigger this code path via /dev/sev ioctls (e.g.,
> SEV_PDH_GEN) and zero out MSR_VM_HSAVE_PA globally? Would the next VMRUN
> execution for an active VM trigger a general protection fault and crash the
> host?
Refuse to re-try initialization if SNP is not already initialized for
SNP_CONFIG.
This is technically an ABI break: before if SNP initialization failed it
could be transparently retriggered by this ioctl, and if no VMs were
running, everything worked fine. Hopefully this is enough of a corner case
that nobody will notice, but someone does, there are a few options:
* do something like symbol_get() for kvm and refuse to initialize if KVM is
loaded
* check each cpu's HSAVE_PA for non-zero data before re-initializing
* once initialization has failed, continue to refuse to initialize until
the ccp module is unloaded |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: drbg - Fix returning success on failure in CTR_DRBG
drbg_ctr_generate() sometimes returns success when it fails, leaving the
output buffer uninitialized. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - protect service table iterations with service_lock
The service_table list is protected by service_lock when entries are
added or removed (in adf_service_add() and adf_service_remove()), but
several functions iterate over the list without holding this lock.
A concurrent adf_service_register() or adf_service_unregister() call
could modify the list during traversal, leading to list corruption or
a use-after-free.
Fix this by holding service_lock across all list_for_each_entry()
iterations of service_table in adf_dev_init(), adf_dev_start(),
adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(),
adf_dev_restarted_notify(), and adf_error_notifier().
The lock ordering is safe: callers of the static helpers (adf_dev_up()
and adf_dev_down()) acquire state_lock before service_lock, and no
event_hld callback or service_lock holder ever acquires state_lock in
the reverse order. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - validate RSA CRT component lengths
The generic RSA key parser (rsa_helper.c) bounds each CRT component (p,
q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt()
allocates half-size DMA buffers (key_sz / 2) and right-aligns each
component with:
memcpy(dst + half_key_sz - len, src, len)
When a CRT component is larger than half_key_sz the subtraction
underflows and memcpy writes past the DMA buffer, causing memory
corruption.
Add a len > half_key_sz check next to the existing !len check for each
of the five CRT components so the driver falls back to the non-CRT path
instead of writing out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fsl-lpspi: terminate the RX channel on TX prepare failure path
When dmaengine_prep_slave_sg() fails for the TX channel, the error path
terminates the TX DMA channel but leaves the RX channel running. Since
the RX channel was already submitted and issued prior to preparing
the TX descriptor, returning -EINVAL causes the SPI core to unmap the
DMA buffers while the RX DMA engine continues writing to them, leading
to potential memory corruption or use-after-free.
Terminate the RX channel before returning on the TX prepare failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix freeing of PMD-sized vmemmap pages
Commit bf9e4e30f353 ("x86/mm: use pagetable_free()"), switched from
freeing non-boot page tables through __free_pages() to
pagetable_free().
However, the function is also called to free vmemmap pages.
Given that vmemmap pages are not page tables, already the page_ptdesc(page)
is wrong. But worse, pagetable_free() calls:
__free_pages(page, compound_order(page));
Since vmemmap pages are not compound pages (see vmemmap_alloc_block())
-- except for HVO, which doesn't apply here -- only first page of a
PMD-sized vmemmap page is freed, leaking the other ones.
Fix it by properly decoupling pagetable and vmemmap freeing.
free_pagetable() no longer has to mess with SECTION_INFO, as only the
vmemmap is marked like that in register_page_bootmem_memmap().
The indentation in remove_pmd_table() is messed up. Fix that while
touching it.
Bootmem info handling will soon be fixed up. For now, handle it
similar to free_pagetable(), just avoiding the ifdef.
[ dhansen: changelog munging. More imperative voice ] |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: scmi: fix of_node refcount leak in scmi_regulator_probe()
scmi_regulator_probe() calls of_find_node_by_name() which takes a
reference on the returned device node. On the error path where
process_scmi_regulator_of_node() fails, the function returns without
calling of_node_put() on the child node, leaking the reference.
Add of_node_put(np) on the error path to properly release the
reference. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/aux: Fix page UAF in map_range()
map_range() reads rb->aux_pages[], rb->aux_nr_pages and rb->aux_pgoff via
perf_mmap_to_page() while holding only event->mmap_mutex. Those fields are
serialized by rb->aux_mutex, and mmap_mutex is per event.
Thus, two events sharing one rb via PERF_EVENT_IOC_SET_OUTPUT can race
rb_alloc_aux() with map_range(), leading to a page-UAF scenario as follows:
CPU 0 CPU 1
===== =====
rb_alloc_aux() map_range()
[1]: allocate rb->aux_pages[0]
[2]: rb->aux_nr_pages++
[3]: perf_mmap_to_page()
returns rb->aux_pages[0]
[4]: map it as VM_PFNMAP
[5]: rb->aux_pgoff = 1
munmap the page
[6]: free rb->aux_pages[0]
Pages mapped as VM_PFNMAP have no refcount protection, so CPU 1 holds a
mapping to a freed physical frame.
Fix this by taking rb->aux_mutex across the page walk in map_range(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Prevent out-of-bounds read in glob matching
String event fields are not necessarily NUL-terminated, so the filter
predicate functions (filter_pred_string(), filter_pred_strloc() and
filter_pred_strrelloc()) pass the field length to the regex match
callbacks, and the length-aware matchers honour it.
regex_match_glob() was the exception: it ignored the length and called
glob_match(), which scans the string until it hits a NUL byte. Some
string fields are not NUL-terminated. One example is the dynamic char
array of the xfs_* namespace tracepoints, which is copied without a
trailing NUL. For such a field, glob matching reads past the end of
the event field, causing a KASAN slab-out-of-bounds read in
glob_match(), reached via regex_match_glob() and filter_match_preds()
from the xfs_lookup tracepoint.
Add a length-bounded glob_match_len() and use it from regex_match_glob()
so glob matching always stops at the field boundary. The matching loop
is factored into a shared helper so glob_match() keeps its behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4: include MAY_WRITE in open permission mask for O_TRUNC
POSIX requires write permission to truncate a file, so an open() that
specifies O_TRUNC must be authorized for write access regardless of the
O_ACCMODE access mode.
nfs_open_permission_mask() builds the access mask passed to
nfs_may_open(), which is the local authorization gate for OPENs the
client serves itself from a cached write delegation via the
can_open_delegated() path in nfs4_try_open_cached(). The mask is
derived from O_ACCMODE alone, so an open(O_RDONLY | O_TRUNC) against a
file the caller cannot write requests only MAY_READ and passes the
local check. The OPEN is then satisfied locally and the truncation is
issued to the server as a SETATTR(size=0) over the delegation stateid,
which the server accepts under standard write-delegation semantics.
POSIX requires that this open fail with EACCES.
Include MAY_WRITE in the mask whenever O_TRUNC is set so the local
check matches the access the server would have enforced. |
| In the Linux kernel, the following vulnerability has been resolved:
module: decompress: check return value of module_extend_max_pages()
module_extend_max_pages() calls kvrealloc() internally and returns
-ENOMEM on allocation failure. The return value is never checked.
If the initial allocation fails, info->pages remains NULL and
info->max_pages remains 0. Subsequent calls to module_get_next_page()
will attempt to dynamically grow the array by calling
module_extend_max_pages(info, 0) since info->used_pages is 0. This
results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated
as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel
oops.
Fix: add the missing error check after module_extend_max_pages() and
return immediately on failure. This matches the pattern used by every
other kvrealloc() caller in the module loading path.
[Sami: Corrected the analysis in the commit message.] |
