| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap-based buffer over-read vulnerability was found in the X.org server's ProcAppleDRICreatePixmap() function. This issue occurs when byte-swapped length values are used in replies, potentially leading to memory leakage and segmentation faults, particularly when triggered by a client with a different endianness. This vulnerability could be exploited by an attacker to cause the X server to read heap memory values and then transmit them back to the client until encountering an unmapped page, resulting in a crash. Despite the attacker's inability to control the specific memory copied into the replies, the small length values typically stored in a 32-bit integer can result in significant attempted out-of-bounds reads. |
| A stack-based buffer overflow was found in the putSDN() function of mail.c in hcode through 2.1. |
| A possible buffer overflow in selected cameras' drivers from XProtect Device Pack can allow an attacker with access to internal network to execute commands on Recording Server under strict conditions. |
| NEXTU FLETA AX1500 WIFI6 v1.0.3 was discovered to contain a buffer overflow at /boafrm/formIpQoS. This vulnerability allows attackers to cause a Denial of Service (DoS) or potentially arbitrary code execution via a crafted POST request. |
| DISPUTE NOTE: this issue does not pose a security risk as it (according to analysis by the original software developer, NLnet Labs) falls within the expected functionality and security controls of the application. Red Hat has made a claim that there is a security risk within Red Hat products. NLnet Labs has no further information about the claim, and suggests that affected Red Hat customers refer to available Red Hat documentation or support channels. ORIGINAL DESCRIPTION: A heap-buffer-overflow flaw was found in the cfg_mark_ports function within Unbound's config_file.c, which can lead to memory corruption. This issue could allow an attacker with local access to provide specially crafted input, potentially causing the application to crash or allowing arbitrary code execution. This could result in a denial of service or unauthorized actions on the system. |
| There are many buffer overflow vulnerabilities present in several CGI binaries of the charging station.This issue affects Iocharger firmware for AC model chargers beforeversion 24120701.
Likelihood: High – Given the prevalence of these buffer overflows, and the clear error message of the web server, an attacker is very likely to be able to find these vulnerabilities.
Impact: Low – Usually, overflowing one of these buffers just causes a segmentation fault of the CGI binary, which causes the web server to return a 502 Bad Gateway error. However the webserver itself is not affected, and no DoS can be achieved. Abusing these buffer overflows in a meaningful way requires highly technical knowledge, especially since ASLR also seems to be enabled on the charging station. However, a skilled attacker might be able to use one of these buffer overflows to obtain remote code execution.
CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). The attack has a small impact on the availability of the device (VC:N/VI:N/VA:L). There is no impact on subsequent systems. (SC:N/SI:N/SA:N). While this device is an EV charger handing significant amounts of power, we do not expect this vulnerability to have a safety impact. The attack can be automated (AU:Y). |
| Argo Workflows Chart is used to set up argo and its needed dependencies through one command. Prior to 0.44.0, the workflow-role has excessive privileges, the worst being create pods/exec, which will allow kubectl exec into any Pod in the same namespace, i.e. arbitrary code execution within those Pods. If a user can be made to run a malicious template, their whole namespace can be compromised. This affects versions of the argo-workflows Chart that use appVersion: 3.4 and above, which no longer need these permissions for the only available Executor, Emissary. It could also affect users below 3.4 depending on their choice of Executor in those versions. This only affects the Helm Chart and not the upstream manifests. This vulnerability is fixed in 0.44.0. |
| Steinberg MyMP3Player version 3.0 (build 3.0.0.67) is vulnerable to a stack-based buffer overflow when parsing .m3u playlist files. The application fails to properly validate the length of input data within the playlist, allowing a specially crafted file to overwrite critical memory structures and execute arbitrary code. This vulnerability can be exploited locally by convincing a user to open a malicious .m3u file. |
| GTA San Andreas Multiplayer (SA-MP) server version 0.3.1.1 is vulnerable to a stack-based buffer overflow triggered by parsing a malformed server.cfg configuration file. The vulnerability allows local attackers to execute arbitrary code when the server binary (samp-server.exe) processes a crafted echo directive containing excessive input. The original 'sa-mp.com' site is defunct, but the community maintains mirrors and forks that may be vulnerable. |
| Cytel Studio version 9.0 and earlier is vulnerable to a stack-based buffer overflow triggered by parsing a malformed .CY3 file. The vulnerability occurs when the application copies user-controlled strings into a fixed-size stack buffer (256 bytes) without proper bounds checking. Exploitation allows arbitrary code execution when the crafted file is opened. |
| ** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-120, DNR-202L, DNS-315L, DNS-320, DNS-320L, DNS-320LW, DNS-321, DNR-322L, DNS-323, DNS-325, DNS-326, DNS-327L, DNR-326, DNS-340L, DNS-343, DNS-345, DNS-726-4, DNS-1100-4, DNS-1200-05 and DNS-1550-04 up to 20240814. This affects the function cgi_create_album of the file /cgi-bin/photocenter_mgr.cgi. The manipulation of the argument current_path leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced. |
| RediSearch is a Redis module that provides querying, secondary indexing, and full-text search for Redis. An authenticated redis user executing FT.SEARCH or FT.AGGREGATE with a specially crafted LIMIT command argument, or FT.SEARCH with a specially crafted KNN command argument, can trigger an integer overflow, leading to heap overflow and potential remote code execution. This vulnerability is fixed in 2.6.24, 2.8.21, and 2.10.10. Avoid setting value of -1 or large values for configuration parameters MAXSEARCHRESULTS and MAXAGGREGATERESULTS, to avoid exploiting large LIMIT arguments. |
| Improper Validation of Specified Type of Input vulnerability in Mitsubishi Electric Corporation MELSEC iQ-F Series FX5-ENET versions 1.100 to 1.200 and FX5-ENET/IP versions 1.100 to 1.104 allows a remote attacker to cause a Denial of Service condition in Ethernet communication of the products by sending specially crafted SLMP packets. |
| The device exposes a web interface on ports TCP/3030 and TCP/9882. This web service runs lighttpd, which implements the “SNORE” interface. This interface is affected by a stack buffer overflow vulnerability due to insecure path parsing. An attacker
with access to the LAN network interface could use a specially crafted HTTP request to exploit a buffer overflow on the modem. |
| An unauthenticated attacker on the WAN interface, with the ability to intercept Dynamic DNS (DDNS) traffic between DDNS services and the modem, could manipulate specific responses to include code that forces a buffer overflow on the modem.
Customers that have not enabled Dynamic DNS on their modem are not vulnerable. |
| BlazeVideo HDTV Player Pro v6.6.0.3 is vulnerable to a stack-based buffer overflow due to improper handling of user-supplied input embedded in .plf playlist files. When parsing a crafted .plf file, the MediaPlayerCtrl.dll component invokes PathFindFileNameA() to extract a filename from a URL-like string. The returned value is then copied to a fixed-size stack buffer using an inline strcpy call without bounds checking. If the input exceeds the buffer size, this leads to a stack overflow and potential arbitrary code execution under the context of the user. |
| Turbo FTP Server versions 1.30.823 and 1.30.826 contain a buffer overflow vulnerability in the handling of the PORT command. By sending a specially crafted payload, an unauthenticated remote attacker can overwrite memory structures and execute arbitrary code with SYSTEM privileges. |
| A stack-based buffer overflow vulnerability exists in ActFax Server version 4.32, specifically in the "Import Users from File" functionality of the client interface. The application fails to properly validate the length of tab-delimited fields in .exp files, leading to unsafe usage of strcpy() during CSV parsing. An attacker can exploit this vulnerability by crafting a malicious .exp file and importing it using the default character set "ECMA-94 / Latin 1 (ISO 8859)". Successful exploitation may result in arbitrary code execution, leading to full system compromise. User interaction is required to trigger the vulnerability. |
| Photodex ProShow Producer version 5.0.3256 contains a stack-based buffer overflow vulnerability in the handling of plugin load list files. When a specially crafted load file is placed in the installation directory, the application fails to properly validate its contents, leading to a buffer overflow when the file is parsed during startup. Exploitation requires local access to place the file and user interaction to launch the application. |
| Simple Web Server 2.2 rc2 contains a stack-based buffer overflow vulnerability in its handling of the Connection HTTP header. When a remote attacker sends an overly long string in this header, the server uses vsprintf() without proper bounds checking, leading to a buffer overflow on the stack. This flaw allows remote attackers to execute arbitrary code with the privileges of the web server process. The vulnerability is triggered before authentication. |
