| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: Fix hid_bpf_get_data() range check
hid_bpf_get_data() returns a pointer into the HID-BPF context data when
the caller-provided offset and size fit inside ctx->allocated_size.
The current check adds rdwr_buf_size and offset before comparing the
result against ctx->allocated_size. Since both values are unsigned, a
very large size can wrap the sum below ctx->allocated_size and make the
helper return a pointer even though the requested range is not contained
in the backing buffer.
Use check_add_overflow() to reject wrapped range ends before comparing
the requested range end against ctx->allocated_size. |
| In the Linux kernel, the following vulnerability has been resolved:
gue: validate REMCSUM private option length
GUE private flags can indicate that remote checksum offload metadata is
present. The private flags field itself is accounted for by
guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even
when GUE_PFLAG_REMCSUM is set.
This lets a packet with only the private flags field pass
validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum()
read the missing REMCSUM start/offset fields from the following bytes.
Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that
malformed packets are rejected during option validation. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_u32: reject invalid shift counts
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop
The ah, hbh and rt matches check that the fixed extension header is
present, then use the header length field to derive the advertised
extension header length for matching.
For the ah match, add the missing advertised-length check. For hbh
and rt, update the existing advertised-length checks. In all three
cases, set hotdrop to true before returning false when the advertised
extension header length exceeds the available skb data.
Returning false treats the packet as a rule mismatch. Set hotdrop to
true and drop malformed packets so they cannot bypass rules intended
to drop packets with these IPv6 extension headers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_connmark: reject invalid shift parameters
Revision 2 of the CONNMARK target accepts user-controlled shift
parameters and applies them to 32-bit mark values in
connmark_tg_shift().
A shift_bits value of 32 or more triggers an undefined-shift bug when
the rule is evaluated. Invalid shift_dir values are also accepted and
silently fall back to the left-shift path.
Reject invalid revision-2 shift parameters in connmark_tg_check() so
malformed rules fail at installation time, before they can reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: LAG, Fix off-by-one in single-FDB error rollback
On failure at index i, the reverse cleanup loop in
mlx5_lag_create_single_fdb() starts from i, so the failed index
itself is rolled back. That can operate on uninitialized state or
double-tear-down a rule the add_one path already self-rolled-back.
Start the rollback from i - 1 so only successfully-installed entries
are undone. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: TC, skip peer flow cleanup when LAG seq is unavailable
mlx5_lag_get_dev_seq() will return error when the peer isn't in the LAG
or when no device is marked as master. Result bad memory access and kernel
crash[1].
Hence, skip the peer when lookup fails.
Note: In case there are peer flows, they are cleaned before LAG cleared
the master mark.
[1]
RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0x3d/0x350 [mlx5_core]
Call Trace:
<TASK>
mlx5e_tc_clean_fdb_peer_flows+0xc1/0x130 [mlx5_core]
mlx5_esw_offloads_unpair+0x3a/0x400 [mlx5_core]
mlx5_esw_offloads_devcom_event+0xee/0x360 [mlx5_core]
mlx5_devcom_send_event+0x7a/0x140 [mlx5_core]
mlx5_esw_offloads_devcom_cleanup+0x2f/0x90 [mlx5_core]
mlx5e_tc_esw_cleanup+0x28/0xf0 [mlx5_core]
mlx5e_rep_tc_cleanup+0x19/0x30 [mlx5_core]
mlx5e_cleanup_uplink_rep_tx+0x36/0x40 [mlx5_core]
mlx5e_cleanup_rep_tx+0x55/0x60 [mlx5_core]
mlx5e_detach_netdev+0x96/0xf0 [mlx5_core]
mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
mlx5e_vport_rep_unload+0xdd/0x110 [mlx5_core]
__esw_offloads_unload_rep+0x81/0xb0 [mlx5_core]
mlx5_eswitch_unregister_vport_reps+0x1d7/0x220 [mlx5_core]
mlx5e_rep_remove+0x22/0x30 [mlx5_core]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xe8/0x1b0
device_del+0x159/0x3c0
mlx5_rescan_drivers_locked+0xbc/0x2d0 [mlx5_core]
mlx5_unregister_device+0x54/0x80 [mlx5_core]
mlx5_uninit_one+0x73/0x130 [mlx5_core]
remove_one+0x78/0xe0 [mlx5_core]
pci_device_remove+0x39/0xa0 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix HV VHCA stats zero-sized buffer allocation
mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(),
before mlx5e_open(). At that point priv->stats_nch is still zero,
because it is only ever incremented in mlx5e_channel_stats_alloc(),
which is reached only from mlx5e_open_channel().
mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and
kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather
than NULL. The "if (!buf)" guard does not catch this, and
mlx5e_hv_vhca_stats_create() completes "successfully" with
priv->stats_agent.buf set to ZERO_SIZE_PTR.
Once channels are opened (priv->stats_nch > 0) and the hypervisor
enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes
buf_len using the new non-zero stats_nch and calls
memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10.
Allocate the buffer based on priv->max_nch, which is set in
mlx5e_priv_init() and is the upper bound on stats_nch:
- Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that
returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and
use it for the kvzalloc() in mlx5e_hv_vhca_stats_create().
- Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on
stats_nch) for the worker's active payload size, so the wire
format (block->rings = stats_nch) and the amount of data filled
by mlx5e_hv_vhca_fill_stats() are unchanged.
The max(max_nch, stats_nch) guard handles the rare case where
mlx5e_attach_netdev() recomputes max_nch downward across a
detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev
does not call mlx5e_priv_cleanup, so stats_nch is only reset when
the netdev is destroyed). Without the guard, the worker could compute
buf_len from stats_nch and overrun the smaller buffer allocated based
on the reduced max_nch.
Allocating a non-zero buffer also makes the kvzalloc() failure path in
mlx5e_hv_vhca_stats_create() reachable for the first time: it returns
early without (re)creating the agent. Clear
priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after
freeing them, so that if a later create() bails out on this path, a
subsequent teardown does not double-free the stale agent/buffer left
from a previous enable/disable cycle.
This mirrors the existing mlx5e pattern of preallocating arrays of
size max_nch (e.g. priv->channel_stats) and lazily populating
entries up to stats_nch on demand. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix HV VHCA stats agent registration race
mlx5e_hv_vhca_stats_create() registers the stats agent through
mlx5_hv_vhca_agent_create(). The helper publishes the agent in
hv_vhca->agents[type] under agents_lock and immediately schedules an
asynchronous control invalidation on the HV VHCA workqueue before
returning to mlx5e.
The asynchronous invalidation invokes the control agent's invalidate
callback, which reads the hypervisor control block and forwards the
command to mlx5e_hv_vhca_stats_control(). That callback may either:
- call cancel_delayed_work_sync(&priv->stats_agent.work), or
- call queue_delayed_work(priv->wq, &sagent->work, sagent->delay).
However, the delayed_work and priv->stats_agent.agent are only
initialized after mlx5_hv_vhca_agent_create() returns to mlx5e:
agent = mlx5_hv_vhca_agent_create(...); /* publish + invalidate */
...
priv->stats_agent.agent = agent; /* too late */
INIT_DELAYED_WORK(&priv->stats_agent.work, ...); /* too late */
If the asynchronous control path runs before the two assignments
above, it can:
- Operate on an uninitialized delayed_work whose timer.function is
NULL. queue_delayed_work() calls add_timer() unconditionally, so
when the timer expires the timer softirq invokes a NULL function
pointer.
- Re-initialize the timer later through INIT_DELAYED_WORK() while
the timer is already enqueued in the timer wheel, corrupting the
hlist (entry.pprev cleared while the previous bucket node still
points at this entry).
- When the worker eventually runs, mlx5e_hv_vhca_stats_work() reads
sagent->agent (NULL) and dereferences it inside
mlx5_hv_vhca_agent_write().
Fix this by:
- Initializing priv->stats_agent.work before invoking
mlx5_hv_vhca_agent_create(), so the work is always in a valid
state when the control callback observes it.
- Adding a struct mlx5_hv_vhca_agent **ctx_update out-parameter
to mlx5_hv_vhca_agent_create(). The helper writes the agent
pointer to *ctx_update before publishing into hv_vhca->agents[]
and triggering the agents_update flow, so any callback
subsequently invoked from that flow already sees a valid
priv->stats_agent.agent. This avoids having the control
callback participate in agent initialization.
While at it, access priv->stats_agent.agent with
READ_ONCE()/WRITE_ONCE() for the cross-CPU access with the worker, and
clear priv->stats_agent.buf on the agent_create() failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: vcap: fix races on the shared Super VCAP block
The VCAP instances on a chip are not independent, yet they are locked
independently. On sparx5 and lan969x the IS0 and IS2 instances are
backed by the same Super VCAP hardware block and share its cache and
command registers: every access drives the shared VCAP_SUPER_CTRL
register and moves data through the shared cache registers.
Accessing one instance therefore races with accessing another. The
per-instance admin->lock cannot prevent this, as each instance takes a
different lock.
The locking issue is mostly disguised by the fact that the core usage of
the vcap api runs under rtnl. However, the full rule dump in debugfs
decodes rules straight from hardware (a READ command followed by a cache
read) and runs outside rtnl, so it races a concurrent tc-flower rule
write to another Super VCAP instance.
Besides corrupting the dump, the read repopulates the shared cache
between the writers cache fill and its write command, so the writer
commits the wrong data and corrupts the hardware entry.
Introduce vcap_lock() and vcap_unlock() helpers and route every rule
lock site in the VCAP API and its debugfs code through them. Replace the
per-instance admin->lock with a single mutex in struct vcap_control that
serializes access to all instances. The helpers reach it through a new
admin->vctrl back-pointer, and the clients initialise and destroy the
control lock instead of a per-instance one.
No path holds more than one instance lock, so collapsing them onto a
single mutex cannot self-deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: fix off-by-one in BD ring consumption on build_skb failure
qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a
NULL return from qede_build_skb(). When it returns NULL under memory
pressure, the functions still consume a BD from the ring before
returning NULL. The callers then recycle additional BDs, resulting in
one extra BD being consumed (off-by-one). This desynchronizes the BD
ring, which can corrupt DMA page reference counts and lead to SLUB
freelist corruption.
Commit 4e910dbe3650 ("qede: confirm skb is allocated before using")
added a NULL check inside qede_build_skb() to prevent a NULL pointer
dereference, but did not address the missing NULL checks in the
callers, making this off-by-one reachable.
Fix this by adding NULL checks for the return value of
qede_build_skb() in both qede_rx_build_skb() and
qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring
manipulation. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
[email protected] reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix adv monitor add failure cleanup
hci_add_adv_monitor() publishes a new adv_monitor in
hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT
offload add path can then fail either locally before the controller add
command completes, or in the MSFT add callback. In the current queued
management add flow, hci_cmd_sync_work() still invokes
mgmt_add_adv_patterns_monitor_complete() with the original pending command
after msft_add_monitor_pattern() returns.
The buggy scenario involves two paths, with each column showing the order
within that path:
MSFT add handling MGMT completion
1. insert monitor and handle 1. receive sync error
2. send MSFT add command 2. call add-monitor completion
3. callback sees bad response 3. load cmd->user_data
4. callback frees monitor 4. read monitor->handle
Local MSFT setup failures have the other half of the same ownership bug:
they return an error after the IDR insertion, but no later code removes the
failed monitor from the IDR.
Keep ownership with the pending management command until its completion.
For normal management adds, the MSFT add callback now records successful
controller state and returns errors to its caller. The management
completion frees the monitor on non-success after copying the response
handle, while resume/reregister callback-error cleanup remains in the
MSFT callback. The success path keeps the existing bookkeeping.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x19f/0x330
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
kasan_report+0xe0/0x110
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? 0xffffffffc00d00da
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? hci_cmd_sync_work+0x1ab/0x210 [bluetooth]
hci_cmd_sync_work+0x1c0/0x210 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
process_one_work+0x4fd/0xbc0
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 471 on cpu 3 at 285.205389s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
__sys_sendto+0x2bc/0x2d0
__x64_sys_sendto+0x76/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 454 on cpu 2 at 285.217112s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
msft_add_monitor_sync+0x54a/0x570 [bluetooth]
hci_add_adv_monitor+0x133/0x180 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix malformed ISO_END/CONT handling
Core specification (Part C vol 4 sec 5.4.5) does not exclude empty
ISO_CONT, ISO_END packets. We currently reject them if they are last.
If controller sends malformed sequence
ISO_START -> rx_len = 4, ISO_CONT skb->len 4, ISO_START
that ends payload in ISO_CONT, we leak conn->rx_skb. If controller sends
too long ISO_END, we panic on skb_put. If controller sends too short
ISO_END we accept it.
Fix by marking unfinished ISO_START via conn->rx_skb != NULL. Check
skb->len properly before skb_put. Combine the ISO_CONT/END code paths
as they require the same initial checks. Reject too short ISO_END
packets. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix VMA access race
aie2_populate_range() and amdxdna_umap_release() access a saved VMA
pointer that may have already been freed, leading to a potential
use-after-free.
Remove the VMA accesses from these functions to avoid the race. |
| In the Linux kernel, the following vulnerability has been resolved:
net/tls: Consume empty data records in tls_sw_read_sock()
A peer may send a zero-length TLS application_data record; TLS 1.3
explicitly permits these as a traffic-analysis countermeasure (RFC
8446, Section 5.1). After decryption such a record has full_len ==
0. tls_sw_read_sock() hands it to the read_actor, which has no
payload to consume and returns zero. The loop treats a zero return
as backpressure (used <= 0), requeues the skb at the head of
rx_list, and stops. rx_list is serviced head-first on the next
call, so the empty record is dequeued, fails the same way, and is
requeued again; every later record on the connection is blocked
behind it.
tls_sw_recvmsg() does not stall on this: a zero-length data record
copies nothing and falls through to consume_skb(). Mirror that in
the read_sock() path by recognizing an empty data record before
the actor runs, consuming it, and continuing. |
| In the Linux kernel, the following vulnerability has been resolved:
net/liquidio: drop cached VF pci_dev LUT
The PF SR-IOV enable path caches VF pci_dev pointers in
dpiring_to_vfpcidev_lut[] by iterating with pci_get_device(). Those
entries do not own a reference, because the iterator drops the previous
device reference on each step. The cached pointer is then dereferenced
later when handling OCTEON_VF_FLR_REQUEST.
Replace the cached VF mapping with runtime lookup on the mailbox DPI
ring: derive the VF index from q_no, resolve the VF via exported PCI
IOV helpers, validate it with the PF pointer and VF ID, then issue
pcie_flr() and drop the reference with pci_dev_put(). Remove the
unused VF lookup table initialization and cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix potential amdxdna_umap lifetime race
amdxdna_umap_release() calls the blocking mmu_interval_notifier_remove()
before removing the object from abo->mem.umap_list. If
aie2_populate_range() runs concurrently, it may obtain a reference to an
amdxdna_umap that is being released, leading to a potential use-after-free.
Use kref_get_unless_zero() in aie2_populate_range() when acquiring a
reference. If the reference count has already dropped to zero, release
is in progress and the entry is skipped. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: igmp: Fix potential UAF in igmp_gq_start_timer()
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Fix potential UAF in MLD delayed work
A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.
During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.
Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.
However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work. |
