| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A stack-based buffer overflow vulnerability in the RTSP service of Tenda CP3 V3.0 (firmware V31.1.9.91) allows an unauthenticated remote attacker to cause a denial of service via a crafted SETUP request. The RTSP service's second-stage URL routing parser fails to validate the length of the URL field in the first SETUP request. By supplying a URL consisting of exactly four consecutive repetitions of a valid RTSP URL, an attacker can bypass first-stage format validation and trigger a stack buffer overflow, causing an immediate crash of the RTSP service process and rendering the device inaccessible to all clients on the local network. |
| A vulnerability has been identified in CPCI85 Central Processing/Communication (All versions < V26.20), SICORE Base system (All versions < V26.20.0). The affected application ships with a default configuration that disables all OPC UA security mechanisms. This could allow an attacker to gain unauthorized access and control over critical system functions. |
| Buffer Overflow vulnerability in OpenHTJ2K v.0.18.4 and before allows an attacker to execute arbitrary code via the openhtj2k_decoder_impl::invoke, invoke_line_based, invoke_line_based_stream, and invoke_line_based_predecoded function in source/core/interface/decoder.cpp |
| An Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Response Splitting') vulnerability [CWE-113] vulnerability in Fortinet FortiOS 7.6.0 through 7.6.4, FortiOS 7.4 all versions, FortiOS 7.2 all versions, FortiProxy 7.6.0 through 7.6.4, FortiProxy 7.4 all versions, FortiProxy 7.2 all versions may allow an attacker in possession of a valid web filter override token to inject arbitrary headers via tricking a user into clicking on a crafted link. |
| NVIDIA TensorRT-LLM for any platform contains a vulnerability in tensor deserialization, where an attacker could cause a heap based buffer overflow. A successful exploit of this vulnerability might lead to information disclosure, data tampering, or denial of service. |
| NVIDIA TensorRT contains a vulnerability where an attacker might cause an overflow to a heap-based buffer. A successful exploit of this vulnerability might lead to code execution. |
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. |
| Buffer Overflow vulnerability in Kerlink Kerlink Wirnet iStation 868 KerOS v.4.3.3_20200803132042 allows a remote attacker to obtain sensitive information via the update URLs component. |
| An issue was discovered in openRISC OR1200 commit 83ac6b. An output mismatch between the RTL and the netlist of the or1200 cpu output port can lead to unexpected behavior. |
| An issue was discovered in RISC-V PicoRV32 commit 87c89a. A mismatch in the PCPI INSN and memory address can lead to unexpected behavior. |
| IBM Langflow OSS 1.0.0 through 1.10.1 Lanflow OSS contains an unauthenticated remote code execution vulnerability in the public flow build endpoint ( /api/v1/build_public_tmp/{flow_id}/flow ). The vulnerability stems from an incomplete denylist in the validate_public_flow_no_code_execution() function that fails to block several code-execution agent components including OpenDsStarAgent, CodeActAgentSmolagents, and CSVAgent. |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.10.50 until 0.10.80, CipherCtxRef::cipher_update_inplace in openssl/src/cipher_ctx.rs incorrectly sized output buffers when used with AES key-wrap-with-padding ciphers EVP_aes_{128,192,256}_wrap_pad. For a non-multiple-of-8 input, OpenSSL writes up to 7 bytes past the end of the caller's buffer or Vec, producing attacker-controllable heap corruption when the plaintext length is attacker-influenced. This issue is fixed in version 0.10.80. |
| Out-of-bounds read via sun.misc.Unsafe in Apache Fory. When out-of-band zero-copy deserialization is used, readAlignedVarUint() can read beyond the bounds of the underlying buffer. Out-of-band zero-copy deserialization is an opt-in feature; applications that do not use it are not affected.
This issue affects Apache Fory (formerly Apache Fury): from 0.5.0 before 1.4.0. Versions before 0.11.0 were published under the Maven coordinates org.apache.fury:fury-core.
Users are recommended to upgrade to version 1.4.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotap
When parsing the radiotap header of an injected frame,
ieee80211_parse_tx_radiotap() uses the IEEE80211_RADIOTAP_ANTENNA value
directly as a shift count:
info->control.antennas |= BIT(*iterator.this_arg);
*iterator.this_arg is an 8-bit value taken straight from the frame
supplied by userspace, so BIT() can be asked to shift by up to 255. That
is undefined behaviour on the unsigned long and is reported by UBSAN:
UBSAN: shift-out-of-bounds in net/mac80211/tx.c:2174:30
shift exponent 235 is too large for 64-bit type 'unsigned long'
Call Trace:
ieee80211_parse_tx_radiotap+0xadb/0x1950 net/mac80211/tx.c:2174
ieee80211_monitor_start_xmit+0xb1f/0x1250 net/mac80211/tx.c:2451
...
packet_sendmsg+0x3eb6/0x50f0 net/packet/af_packet.c:3109
info->control.antennas is a 2-bit bitmap (u8 antennas:2), so only antenna
indices 0 and 1 can ever be represented. Ignore any larger value instead
of shifting out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
chap_server_compute_hash() allocates client_digest as
kzalloc(chap->digest_size) and then, for BASE64-encoded responses,
passes chap_r directly to chap_base64_decode() without checking whether
the input length could produce more than digest_size bytes of output.
chap_base64_decode() writes to the destination unconditionally as long
as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and
the "0b" prefix stripped by extract_param(), up to 127 base64 characters
can reach the decoder. 127 characters decode to 95 bytes. For SHA-256
(digest_size=32) this overflows client_digest by 63 bytes; for MD5
(digest_size=16) the overflow is 79 bytes.
The length check at line 344 fires after the write has already happened.
The HEX branch in the same switch statement already validates the length
up front. Apply the same approach to the BASE64 branch: strip trailing
base64 padding characters, then reject any input whose data length
exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder.
Stripping trailing '=' before the comparison handles both padded and
unpadded encodings. chap_base64_decode() already returns early on '=',
so the full original string is still passed to the decoder unchanged.
The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is
kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at
CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1
base64 characters reach the decoder. The maximum decoded size,
DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than
CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is
added at the call site to document this. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS
frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in
the generic FC transport. This is not a local userspace or IP network
path; the attacker must be able to inject fabric traffic, for example as
a compromised switch or fabric controller, or as a same-zone N_Port on a
fabric that permits source spoofing.
The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop
counter against the 32-bit on-wire pname_count field, and did not bound
pname_count by the descriptor body already validated by the TLV walker.
A pname_count of 256 therefore wraps the counter and keeps the loop
condition true indefinitely.
Factor the shared pname_list[] walk into one helper, widen the counter
to u32, and clamp pname_count against the entries that fit in the
descriptor body before iterating. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: property: Reject u32 wrap in tb_property_entry_valid()
entry->value is u32 and entry->length is u16; the sum is performed in
u32 and wraps. A malicious XDomain peer can pick
value = 0xffffff00, length = 0x100 so the sum 0x100000000 wraps to 0
and passes the > block_len check. tb_property_parse() then passes
entry->value to parse_dwdata() as a dword offset into the property
block, reading attacker-directed memory far past the allocation.
For TEXT-typed entries with the "deviceid" or "vendorid" keys this
lands in xd->device_name / xd->vendor_name and is readable back via
the per-XDomain device_name / vendor_name sysfs attributes; the leak
is NUL-bounded (kstrdup() stops at the first zero byte) and
untargeted (the attacker picks a delta, not an absolute address).
DATA-typed entries are parsed into property->value.data but not
generically surfaced to userspace.
Use check_add_overflow() so a wrapped sum is rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: cypress_m8: validate interrupt packet headers
cypress_read_int_callback() parses the interrupt-in buffer according to
the selected Cypress packet format. Format 1 has a two-byte status/count
header and format 2 has a one-byte combined status/count header. The
usb-serial core sizes the interrupt-in buffer from the endpoint
descriptor's wMaxPacketSize, and successful interrupt transfers can
complete short when URB_SHORT_NOT_OK is not set.
Check that the completed packet contains the selected header before
reading it. Malformed short reports are ignored and the interrupt URB is
resubmitted through the existing retry path, preventing out-of-bounds
header-byte reads.
KASAN report as below:
KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0
Read of size 1
Call trace:
cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009)
__usb_hcd_giveback_urb()
dummy_timer()
[ johan: use constants in header length sanity checks ] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbtmc: check URB actual_length for interrupt-IN notifications
USBTMC devices can use an optional interrupt endpoint for notification
messages. These typically contain two-byte headers indicating the
payload format, but the driver does not check if these headers are
present before accessing the data buffers. In cases where the URB
actual_length is not enough to fit these headers, the driver will either
cause an out-of-bounds read, or consume stale leftover data from a
previous notification.
Fix by checking if actual_data contains enough bytes for the headers,
otherwise resubmit URB to the interrupt endpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops
Commit d07b26f39246 ("ksmbd: require minimum ACE size in
smb_check_perm_dacl()") introduced a transposed bounds check:
if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE)
Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates
to `aces_size < 0`. Because `aces_size` is always non-negative, this
check becomes dead code and never breaks the loop.
Worse, that commit removed the old 4-byte guard, meaning the loop now
reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This
re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation
during subsequent SMB2_CREATE operations.
Fix this by properly transposing the comparison to require at least
16 bytes (8-byte offset + 8-byte SID base), matching the correct form
used in smb_inherit_dacl(). |
