| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Add validation for MTU changes
Increasing the MTU beyond the HDS threshold causes the hardware to
fragment packets across multiple buffers. If a single-buffer XDP program
is attached, the driver will drop all multi-frag frames. While we can't
prevent a remote sender from sending non-TCP packets larger than the MTU,
this will prevent users from inadvertently breaking new TCP streams.
Traditionally, drivers supported XDP with MTU less than 4Kb
(packet per page). Fbnic currently prevents attaching XDP when MTU is too high.
But it does not prevent increasing MTU after XDP is attached. |
| An authentication bypass vulnerability exists in MISP when LDAP mixed authentication is enabled with OTP enforcement. In deployments configured with LdapAuth.mixedAuth=true and Security.require_otp=true, users authenticated through an authentication plugin, such as LDAP, may have their authenticated session established during the application beforeFilter phase before the normal login flow enforces the OTP challenge.
As a result, an attacker with valid primary authentication credentials could bypass the required OTP step by authenticating through the plugin-backed login flow and then directly accessing another application URL instead of completing the OTP verification page. This allows access to the application as the affected user without providing a valid TOTP, HOTP, or email OTP code.
The issue affects configurations where plugin-based authentication is enabled and OTP is expected to be mandatory. The fix ensures that OTP requirements are checked immediately after plugin authentication and before the user session is established, redirecting users to the appropriate OTP challenge when required. |
| Unauthenticated Broken Authentication in Email Marketing for WooCommerce by Omnisend <= 1.18.0 versions. |
| Subscriber Cross Site Scripting (XSS) in EventPrime <= 4.3.2.1 versions. |
| Unauthenticated PHP Object Injection in EventPrime <= 4.3.2.1 versions. |
| Unauthenticated Broken Authentication in Masteriyo - LMS <= 2.1.8 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/shstk: Prevent deadlock during shstk sigreturn
During sigreturn the shadow stack signal frame is popped. The kernel does
this by reading the shadow stack using normal read accesses. When it can't
assume the memory is shadow stack, it takes extra steps to makes sure it is
reading actual shadow stack memory and not other normal readable memory. It
does this by holding the mmap read lock while doing the access and checking
the flags of the VMA.
Unfortunately that is not safe. If the read of the shadow stack sigframe
hits a page fault, the fault handler will try to recursively grab another
mmap read lock. This normally works ok, but if a writer on another CPU is
also waiting, the second read lock could fail and cause a deadlock.
Fix this by not holding mmap lock during the read access to userspace.
Instead use mmap_lock_speculate_...() to watch for changes between dropping
mmap lock and the userspace access. Retry if anything grabbed an mmap write
lock in between and could have changed the VMA.
These mmap_lock_speculate_...() helpers use mm::mm_lock_seq, which is only
available when PER_VMA_LOCK is configured. So make X86_USER_SHADOW_STACK
depend on it. On x86, PER_VMA_LOCK is a default configuration for SMP
kernels. So drop support for the other configs under the assumption that
the !SMP shadow stack user base does not exist.
Currently there is a check that skips the lookup work when the SSP can be
assumed to be on a shadow stack. While reorganizing the function, remove
the optimization to make the tricky code flows more common, such that
issues like this cannot escape detection for so long. |
| Unauthenticated Cross Site Request Forgery (CSRF) in WP Migrate Lite <= 2.7.8 versions. |
| Unauthenticated Cross Site Scripting (XSS) in Drag and Drop Multiple File Upload – Contact Form 7 <= 1.3.9.7 versions. |
| Unauthenticated Other Vulnerability Type in WP Travel Engine <= 6.7.10 versions. |
| Unauthenticated PHP Object Injection in WP Travel Engine <= 6.7.12 versions. |
| Unauthenticated Broken Access Control in Welcart e-Commerce <= 2.11.28 versions. |
| Unauthenticated SQL Injection in GPTranslate – Multilingual AI Translation for WordPress: Automatically Translate Websites <= 2.32.6 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix deadlock in jbd2_journal_cancel_revoke()
Commit f76d4c28a46a ("fs/jbd2: use sleeping version of
__find_get_block()") changed jbd2_journal_cancel_revoke() to use
__find_get_block_nonatomic() which holds the folio lock instead of
i_private_lock. This breaks the lock ordering (folio -> buffer) and
causes an ABBA deadlock when the filesystem blocksize < pagesize:
T1 T2
ext4_mkdir()
ext4_init_new_dir()
ext4_append()
ext4_getblk()
lock_buffer() <- A
sync_blockdev()
blkdev_writepages()
writeback_iter()
writeback_get_folio()
folio_lock() <- B
ext4_journal_get_create_access()
jbd2_journal_cancel_revoke()
__find_get_block_nonatomic()
folio_lock() <- B
block_write_full_folio()
lock_buffer() <- A
This can occasionally cause generic/013 to hang.
Fix by only calling __find_get_block_nonatomic() when the passed
buffer_head doesn't belong to the bdev, which is the only case that we
need to look up its bdev alias. Otherwise, the lookup is redundant since
the found buffer_head is equal to the one we passed in. |
| Unauthenticated Insecure Direct Object References (IDOR) in VikRentCar <= 1.4.5 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - fix IRQ cleanup on 6xxx probe failure
When adf_dev_up() partially completes and then fails, the IRQ
handlers registered during adf_isr_resource_alloc() are not detached
before the MSI-X vectors are released.
Since the device is enabled with pcim_enable_device(), calling
pci_alloc_irq_vectors() internally registers pcim_msi_release() as a
devres action. On probe failure, devres runs pcim_msi_release() which
calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ
handlers (for example 'qat0-bundle0') are still attached. This causes
remove_proc_entry() warnings:
[ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0'
Moving the devm_add_action_or_reset() before adf_dev_up() does not solve
the problem since devres runs in LIFO order and pcim_msi_release(),
registered later inside adf_dev_up(), would still fire before
adf_device_down().
Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to
properly free IRQ handlers before devres releases the MSI-X vectors. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Always use NextRIP as vmcb02's NextRIP after first L2 VMRUN
For guests with NRIPS disabled, L1 does not provide NextRIP when running
an L2 with an injected soft interrupt, instead it advances the current RIP
before running it. KVM uses the current RIP as the NextRIP in vmcb02 to
emulate a CPU without NRIPS.
However, after L2 runs the first time, NextRIP will be updated by the CPU
and/or KVM, and the current RIP is no longer the correct value to use in
vmcb02. Hence, after save/restore, use the current RIP if and only if a
nested run is pending, otherwise use NextRIP. Give soft_int_next_rip the
same treatment, as it's the same logic, just for a narrower use case.
[sean: give soft_int_next_rip the same treatment] |
| Unauthenticated Path Traversal in FastDup <= 2.7.2 versions. |
| OpenClaw before 2026.5.18 contains a policy enforcement vulnerability in system.run safe-bin allowlist validation that allows shell expansion to modify command interpretation on POSIX nodes. Authenticated operators can exploit shell metacharacters in approved commands to read unintended node-local files and expose sensitive configuration data. |
| OpenClaw before 2026.4.29 contains an authorization bypass vulnerability in the QQBot streaming command that allows authenticated senders to mutate configuration without explicit allowFrom restrictions. Attackers can modify QQBot streaming configuration outside intended admin policy by reaching the affected command without non-wildcard allowlist entry requirements. |
