Total
495 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-48958 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethernet: aeroflex: fix potential skb leak in greth_init_rings() The greth_init_rings() function won't free the newly allocated skb when dma_mapping_error() returns error, so add dev_kfree_skb() to fix it. Compile tested only. | ||||
| CVE-2022-48910 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ensure we call ipv6_mc_down() at most once There are two reasons for addrconf_notify() to be called with NETDEV_DOWN: either the network device is actually going down, or IPv6 was disabled on the interface. If either of them stays down while the other is toggled, we repeatedly call the code for NETDEV_DOWN, including ipv6_mc_down(), while never calling the corresponding ipv6_mc_up() in between. This will cause a new entry in idev->mc_tomb to be allocated for each multicast group the interface is subscribed to, which in turn leaks one struct ifmcaddr6 per nontrivial multicast group the interface is subscribed to. The following reproducer will leak at least $n objects: ip addr add ff2e::4242/32 dev eth0 autojoin sysctl -w net.ipv6.conf.eth0.disable_ipv6=1 for i in $(seq 1 $n); do ip link set up eth0; ip link set down eth0 done Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2) can also be used to create a nontrivial idev->mc_list, which will the leak objects with the right up-down-sequence. Based on both sources for NETDEV_DOWN events the interface IPv6 state should be considered: - not ready if the network interface is not ready OR IPv6 is disabled for it - ready if the network interface is ready AND IPv6 is enabled for it The functions ipv6_mc_up() and ipv6_down() should only be run when this state changes. Implement this by remembering when the IPv6 state is ready, and only run ipv6_mc_down() if it actually changed from ready to not ready. The other direction (not ready -> ready) already works correctly, as: - the interface notification triggered codepath for NETDEV_UP / NETDEV_CHANGE returns early if ipv6 is disabled, and - the disable_ipv6=0 triggered codepath skips fully initializing the interface as long as addrconf_link_ready(dev) returns false - calling ipv6_mc_up() repeatedly does not leak anything | ||||
| CVE-2022-48893 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Cleanup partial engine discovery failures If we abort driver initialisation in the middle of gt/engine discovery, some engines will be fully setup and some not. Those incompletely setup engines only have 'engine->release == NULL' and so will leak any of the common objects allocated. v2: - Drop the destroy_pinned_context() helper for now. It's not really worth it with just a single callsite at the moment. (Janusz) | ||||
| CVE-2023-47124 | 1 Traefik | 1 Traefik | 2024-12-18 | 5.9 Medium |
| Traefik is an open source HTTP reverse proxy and load balancer. When Traefik is configured to use the `HTTPChallenge` to generate and renew the Let's Encrypt TLS certificates, the delay authorized to solve the challenge (50 seconds) can be exploited by attackers to achieve a `slowloris attack`. This vulnerability has been patch in version 2.10.6 and 3.0.0-beta5. Users are advised to upgrade. Users unable to upgrade should replace the `HTTPChallenge` with the `TLSChallenge` or the `DNSChallenge`. | ||||
| CVE-2024-21789 | 1 F5 | 2 Big-ip Advanced Web Application Firewall, Big-ip Application Security Manager | 2024-12-12 | 7.5 High |
| When a BIG-IP ASM/Advanced WAF security policy is configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated | ||||
| CVE-2023-1150 | 1 Wago | 36 750-362, 750-362\/000-001, 750-362\/000-001 Firmware and 33 more | 2024-12-05 | 7.5 High |
| Uncontrolled resource consumption in Series WAGO 750-3x/-8x products may allow an unauthenticated remote attacker to DoS the MODBUS server with specially crafted packets. | ||||
| CVE-2018-0165 | 1 Cisco | 47 Catalyst 3850-12s-e, Catalyst 3850-12s-s, Catalyst 3850-12xs-e and 44 more | 2024-12-02 | N/A |
| A vulnerability in the Internet Group Management Protocol (IGMP) packet-processing functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust buffers on an affected device, resulting in a denial of service (DoS) condition, aka a Memory Leak. The vulnerability is due to the affected software insufficiently processing IGMP Membership Query packets that are sent to an affected device. An attacker could exploit this vulnerability by sending a large number of IGMP Membership Query packets, which contain certain values, to an affected device. A successful exploit could allow the attacker to exhaust buffers on the affected device, resulting in a DoS condition that requires the device to be reloaded manually. This vulnerability affects: Cisco Catalyst 4500 Switches with Supervisor Engine 8-E, if they are running Cisco IOS XE Software Release 3.x.x.E and IP multicast routing is configured; Cisco devices that are running Cisco IOS XE Software Release 16.x, if IP multicast routing is configured. Cisco Bug IDs: CSCuw09295, CSCve94496. | ||||
| CVE-2018-0421 | 1 Cisco | 2 Prime Access Registrar, Prime Access Registrar Jumpstart | 2024-11-26 | N/A |
| A vulnerability in TCP connection management in Cisco Prime Access Registrar could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition when the application unexpectedly restarts. The vulnerability is due to incorrect handling of incoming TCP SYN packets to specific listening ports. The improper handling of the TCP SYN packets could cause a system file description to be allocated and not freed. An attacker could exploit this vulnerability by sending a crafted stream of TCP SYN packets to the application. A successful exploit could allow the attacker to cause the application to eventually restart if a file description cannot be obtained. | ||||
| CVE-2018-0471 | 1 Cisco | 1 Ios Xe | 2024-11-26 | 7.4 High |
| A vulnerability in the Cisco Discovery Protocol (CDP) module of Cisco IOS XE Software Releases 16.6.1 and 16.6.2 could allow an unauthenticated, adjacent attacker to cause a memory leak that may lead to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain CDP packets. An attacker could exploit this vulnerability by sending certain CDP packets to an affected device. A successful exploit could cause an affected device to continuously consume memory and eventually result in a memory allocation failure that leads to a crash, triggering a reload of the affected device. | ||||
| CVE-2019-1965 | 1 Cisco | 87 7000 10-slot, 7000 18-slot, 7000 4-slot and 84 more | 2024-11-21 | 7.7 High |
| A vulnerability in the Virtual Shell (VSH) session management for Cisco NX-OS Software could allow an authenticated, remote attacker to cause a VSH process to fail to delete upon termination. This can lead to a build-up of VSH processes that overtime can deplete system memory. When there is no system memory available, this can cause unexpected system behaviors and crashes. The vulnerability is due to the VSH process not being properly deleted when a remote management connection to the device is disconnected. An attacker could exploit this vulnerability by repeatedly performing a remote management connection to the device and terminating the connection in an unexpected manner. A successful exploit could allow the attacker to cause the VSH processes to fail to delete, which can lead to a system-wide denial of service (DoS) condition. The attacker must have valid user credentials to log in to the device using the remote management connection. | ||||
| CVE-2024-49769 | 3 Agendaless, Pylons, Redhat | 4 Waitress, Waitress, Openshift Ironic and 1 more | 2024-11-21 | 7.5 High |
| Waitress is a Web Server Gateway Interface server for Python 2 and 3. When a remote client closes the connection before waitress has had the opportunity to call getpeername() waitress won't correctly clean up the connection leading to the main thread attempting to write to a socket that no longer exists, but not removing it from the list of sockets to attempt to process. This leads to a busy-loop calling the write function. A remote attacker could run waitress out of available sockets with very little resources required. Waitress 3.0.1 contains fixes that remove the race condition. | ||||
| CVE-2024-28882 | 2024-11-21 | 4.3 Medium | ||
| OpenVPN from 2.6.0 through 2.6.10 in a server role accepts multiple exit notifications from authenticated clients which will extend the validity of a closing session | ||||
| CVE-2024-22383 | 2024-11-21 | 6.2 Medium | ||
| Missing release of resource after effective lifetime (CWE-772) in the Controller 7000 resulted in HBUS connected T-Series readers to not automatically recover after coming under attack over the RS-485 interface, resulting in a persistent denial of service. This issue affects: All variants of the Gallagher Controller 7000 9.00 prior to vCR9.00.231204b (distributed in 9.00.1507(MR1)), 8.90 prior to vCR8.90.240209b (distributed in 8.90.1751 (MR3)), 8.80 prior to vCR8.80.240209a (distributed in 8.80.1526 (MR4)), 8.70 prior to vCR8.70.240209a (distributed in 8.70.2526 (MR6)). | ||||
| CVE-2023-45814 | 1 Littlebigfresh | 1 Bunkum | 2024-11-21 | 5.3 Medium |
| Bunkum is an open-source protocol-agnostic request server for custom game servers. First, a little bit of background. So, in the beginning, Bunkum's `AuthenticationService` only supported injecting `IUser`s. However, as Refresh and SoundShapesServer implemented permissions systems support for injecting `IToken`s into endpoints was added. All was well until 4.0. Bunkum 4.0 then changed to enforce relations between `IToken`s and `IUser`s. This wasn't implemented in a very good way in the `AuthenticationService`, and ended up breaking caching in such a way that cached tokens would persist after the lifetime of the request - since we tried to cache both tokens and users. From that point until now, from what I understand, Bunkum was attempting to use that cached token at the start of the next request once cached. Naturally, when that token expired, downstream projects like Refresh would remove the object from Realm - and cause the object in the cache to be in a detached state, causing an exception from invalid use of `IToken.User`. So in other words, a use-after-free since Realm can't manage the lifetime of the cached token. Security-wise, the scope is fairly limited, can only be pulled off on a couple endpoints given a few conditions, and you can't guarantee which token you're going to get. Also, the token *would* get invalidated properly if the endpoint had either a `IToken` usage or a `IUser` usage. The fix is to just wipe the token cache after the request was handled, which is now in `4.2.1`. Users are advised to upgrade. There are no known workarounds for this vulnerability. | ||||
| CVE-2023-41094 | 1 Silabs | 1 Emberznet | 2024-11-21 | 10 Critical |
| TouchLink packets processed after timeout or out of range due to Operation on a Resource after Expiration and Missing Release of Resource after Effective Lifetime may allow a device to be added outside of valid TouchLink range or pairing duration This issue affects Ember ZNet 7.1.x from 7.1.3 through 7.1.5; 7.2.x from 7.2.0 through 7.2.3; Version 7.3 and later are unaffected | ||||
| CVE-2023-36533 | 1 Zoom | 2 Meeting Software Development Kit, Video Software Development Kit | 2024-11-21 | 7.1 High |
| Uncontrolled resource consumption in Zoom SDKs before 5.14.7 may allow an unauthenticated user to enable a denial of service via network access. | ||||
| CVE-2023-31274 | 1 Aveva | 1 Pi Server | 2024-11-21 | 5.3 Medium |
| AVEVA PI Server versions 2023 and 2018 SP3 P05 and prior contain a vulnerability that could allow an unauthenticated user to cause the PI Message Subsystem of a PI Server to consume available memory resulting in throttled processing of new PI Data Archive events and a partial denial-of-service condition. | ||||
| CVE-2023-20095 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense | 2024-11-21 | 8.6 High |
| A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of HTTPS requests. An attacker could exploit this vulnerability by sending crafted HTTPS requests to an affected system. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a DoS condition. | ||||
| CVE-2022-45887 | 3 Linux, Netapp, Redhat | 14 Linux Kernel, H300s, H300s Firmware and 11 more | 2024-11-21 | 4.7 Medium |
| An issue was discovered in the Linux kernel through 6.0.9. drivers/media/usb/ttusb-dec/ttusb_dec.c has a memory leak because of the lack of a dvb_frontend_detach call. | ||||
| CVE-2022-41952 | 1 Matrix | 1 Synapse | 2024-11-21 | 6.5 Medium |
| Synapse before 1.52.0 with URL preview functionality enabled will attempt to generate URL previews for media stream URLs without properly limiting connection time. Connections will only be terminated after `max_spider_size` (default: 10M) bytes have been downloaded, which can in some cases lead to long-lived connections towards the streaming media server (for instance, Icecast). This can cause excessive traffic and connections toward such servers if their stream URL is, for example, posted to a large room with many Synapse instances with URL preview enabled. Version 1.52.0 implements a timeout mechanism which will terminate URL preview connections after 30 seconds. Since generating URL previews for media streams is not supported and always fails, 1.53.0 additionally implements an allow list for content types for which Synapse will even attempt to generate a URL preview. Upgrade to 1.53.0 to fully resolve the issue. As a workaround, turn off URL preview functionality by setting `url_preview_enabled: false` in the Synapse configuration file. | ||||