| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix write hang in passthrough mode
The invalidate_remove() function has incomplete logic for handling write
hit bios after cache invalidation. It sets up the remapping for the
overwrite_bio but then drops it immediately without submission, causing
write operations to hang.
Fix by adding a new invalidate_committed() continuation that submits
the remapped writes to the cache origin after metadata commit completes,
while using the overwrite_endio hook to ensure proper completion
sequencing. This maintains existing coherency. Also improve error
handling in invalidate_complete() to preserve the original error status
instead of using bio_io_error() unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: terminate the cached volume label after UTF-8 conversion
ntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s()
and stores the result in sbi->volume.label. The converted label is later
exposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() only
returns the number of bytes written and does not add a trailing NUL.
If the converted label fills the entire fixed buffer,
ntfs3_label_show() can read past the end of sbi->volume.label while
looking for a terminator.
Terminate the cached label explicitly after a successful conversion and
clamp the exact-full case to the last byte of the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: fix mismatch between power and frequency
During DPU runtime suspend, calling dev_pm_opp_set_rate(dev, 0) drops
the MMCX rail to MIN_SVS while the core clock frequency remains at its
original (highest) rate. When runtime resume re-enables the clock, this
may result in a mismatch between the rail voltage and the clock rate.
For example, in the DPU bind path, the sequence could be:
cpu0: dev_sync_state -> rpmhpd_sync_state
cpu1: dpu_kms_hw_init
timeline 0 ------------------------------------------------> t
After rpmhpd_sync_state, the voltage performance is no longer guaranteed
to stay at the highest level. During dpu_kms_hw_init, calling
dev_pm_opp_set_rate(dev, 0) drops the voltage, causing the MMCX rail to
fall to MIN_SVS while the core clock is still at its maximum frequency.
When the power is re-enabled, only the clock is enabled, leading to a
situation where the MMCX rail is at MIN_SVS but the core clock is at its
highest rate. In this state, the rail cannot sustain the clock rate,
which may cause instability or system crash.
Remove the call to dev_pm_opp_set_rate(dev, 0) from dpu_runtime_suspend
to ensure the correct vote is restored when DPU resumes.
Patchwork: https://patchwork.freedesktop.org/patch/710077/ |
| An issue in Technitium DNS Server v.14.3 and before allows a remote attacker to cause a denial of service via the DnsServerApp.exe, DnsServerApp.dll, TechnitiumLibrary.Net/Dns/DnsClient.cs components |
| RustFS is a distributed object storage system built in Rust. In 1.0.0-beta.7 and earlier, the real-time metrics endpoint at /rustfs/admin/v3/metrics is accessible to any valid IAM user regardless of their assigned policy. Every other admin handler in the codebase calls validate_admin_request to enforce admin-action IAM checks; the MetricsHandler skips this call entirely. A restricted IAM user whose policy grants only access to their own bucket can read server-wide operational metrics including disk I/O statistics, network throughput, scanner cycle timing, and cluster RPC state. |
| RustFS is a distributed object storage system built in Rust. From 1.0.0-alpha.1 until 1.0.0-beta.9, when the FTP frontend is enabled, the FTP read and probe handlers dispatch directly to the storage backend without ever calling the IAM authorization function that the FTP write/list handlers (and the entire HTTP S3 path) use. As a result, any user who can authenticate to the FTP listener — including a user whose IAM policy contains an explicit Deny on s3:GetObject — can read (RETR) and stat (SIZE/MDTM) any object in any bucket, and probe any bucket (CWD), completely regardless of their IAM policy. This vulnerability is fixed in 1.0.0-beta.9. |
| RustFS is a distributed object storage system built in Rust. From 1.0.0-alpha.1 until 1.0.0-beta.9, RustFS contains an authorization bypass in the bucket replication admin API. The ListRemoteTargetHandler handler for listing remote replication targets only checks whether request credentials exist, but does not verify that the caller has replication or administrator permissions. As a result, an authenticated user with no effective bucket or admin permissions can list remote replication target configuration for a bucket. Because the returned BucketTarget objects include remote target credentials, this can disclose replication access keys and secret keys. This vulnerability is fixed in 1.0.0-beta.9. |
| An issue in the DSO::mmap_and_copy function of relibc commit 61f42d allows attackers to cause a Denial of Service (DoS) via loading a crafted shared library. |
| Kestra is an open-source, event-driven orchestration platform. Prior to 1.0.45 and 1.3.21, the previewFileFromExecution endpoint (GET /api/v1/{tenant}/executions/{executionId}/file/preview) contains an access control bypass that allows any authenticated user to read output files from any other execution within the same tenant, bypassing execution-level and namespace-level isolation. This vulnerability is fixed in 1.0.45 and 1.3.21. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: check for device unregister when creating assoc
psp_assoc_device_get_locked() obtains a psp_dev reference via
psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU);
it then acquires psd->lock and drops the reference. Before
the lock is taken, psp_dev_unregister() can run to completion:
take psd->lock, clear out state, unlock, drop the registration
reference.
The expectation is that the lock prevents device unregistration,
but much like with netdevs special care has to be taken when
"upgrading" a reference to a locked device. Add the missing
check if device is still alive. psp_dev_is_registered() exists
already but had no callers, which makes me wonder if I either
forgot to add this or lost the check during refactoring... |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
When PERST# is deasserted twice (assert -> deassert -> assert -> deassert),
a CBB (Control Backbone) timeout occurs at DBI register offset 0x8bc
(PCIE_MISC_CONTROL_1_OFF). This happens because pci_epc_deinit_notify()
and dw_pcie_ep_cleanup() are called before reset_control_deassert() powers
on the controller core.
The call chain that causes the timeout:
pex_ep_event_pex_rst_deassert()
pci_epc_deinit_notify()
pci_epf_test_epc_deinit()
pci_epf_test_clear_bar()
pci_epc_clear_bar()
dw_pcie_ep_clear_bar()
__dw_pcie_ep_reset_bar()
dw_pcie_dbi_ro_wr_en() <- Accesses 0x8bc DBI register
reset_control_deassert(pcie->core_rst) <- Core powered on HERE
The DBI registers, including PCIE_MISC_CONTROL_1_OFF (0x8bc), are only
accessible after the controller core is powered on via
reset_control_deassert(pcie->core_rst). Accessing them before this point
results in a CBB timeout because the hardware is not yet operational.
Fix this by moving pci_epc_deinit_notify() and dw_pcie_ep_cleanup() to
after reset_control_deassert(pcie->core_rst), ensuring the controller is
fully powered on before any DBI register accesses occur. |
| Budibase is an open-source low-code platform. Prior to 3.39.3, the application server exposes an unauthenticated endpoint that generates S3 PutObject presigned URLs using credentials stored in a workspace datasource. The route is protected only by the recaptcha middleware and does not require authentication, table permission, datasource permission, or builder access. A public caller who knows a workspace ID and S3 datasource ID can request a signed upload URL for attacker-controlled bucket and key values. This vulnerability is fixed in 3.39.3. |
| Budibase is an open-source low-code platform. Prior to 3.39.9, `POST /api/pwa/process-zip` at packages/server/src/api/routes/static.ts:24 accepts a builder-uploaded .zip, extracts it with [email protected] into a temp directory, then for each entry listed in icons.json validates the icon path, opens it, and streams the bytes into MinIO. The resulting object is served back via GET /api/assets/{appId}/pwa/{uuid}.png. [email protected] preserves absolute symlink targets when restoring symlink entries. The icon-source validator at packages/server/src/api/controllers/static/index.ts:259-268 resolves the icon source string against baseDir (path.resolve), checks resolvedSrc.startsWith(baseDir + path.sep) against that string, and calls fs.existsSync(resolvedSrc) which follows symbolic links to confirm the target exists. None of the three calls reject symbolic-link entries. packages/backend-core/src/objectStore/objectStore.ts:302 then calls (await fsp.open(path)).createReadStream() on the resolved path. fsp.open follows the symlink, the target file's bytes stream into MinIO, and the response of the asset-fetch endpoint returns those bytes verbatim. Result: a workspace-level builder reads any file the server process can open. This vulnerability is fixed in 3.39.9. |
| OpenProject is open-source, web-based project management software. Prior to 17.3.2 and 17.4.0, a Missing Authorization vulnerability exists in OpenProject's CostReportsController. The rename and update actions allow any authenticated user to modify the name, filters, and grouping of any Public cost report in the system without verifying ownership or permission level. An attacker who discovers or guesses a public report's numeric ID can rename or overwrite its filter configuration without any warning to the report's owner. This vulnerability is fixed in 17.3.2 and 17.4.0. |
| Patool before 4.0.5 contains a path traversal vulnerability in the safe_extract() function in patoolib/programs/py_tarfile.py when running on Python before 3.12, where the is_within_directory() helper uses os.path.commonprefix() for character-level string comparison instead of path-level comparison, allowing a crafted archive member path to bypass the containment check. Attackers can supply a malicious archive with specially crafted member paths to write arbitrary files. |
| OpenProject is open-source, web-based project management software. Prior to 17.4.0, OpenProject's rich text (markdown) rendering pipeline uses Sanitize::Config::RELAXED[:css] for inline style sanitization. This configuration permits essentially all CSS properties in style attributes on permitted HTML elements (figure, img, table, th, tr, td). This allows any authenticated user with write access to formattable text fields (work package descriptions, comments, project descriptions, news) to inject CSS This vulnerability is fixed in 17.4.0. |
| OpenProject is open-source, web-based project management software. Prior to 17.4.0, the GET /api/v3/relations endpoint allows any authenticated user to retrieve relations — and the subject (title) of work packages they have no permission to view — by supplying an arbitrary work package ID in the involved, fromId, or toId filter. This bypasses the Relation.visible scope due to a flawed performance optimization in RelationQuery. This vulnerability is fixed in 17.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Clear rel_deadline when initializing forked entities
A yield-triggered crash can happen when a newly forked sched_entity
enters the fair class with se->rel_deadline unexpectedly set.
The failing sequence is:
1. A task is forked while se->rel_deadline is still set.
2. __sched_fork() initializes vruntime, vlag and other sched_entity
state, but does not clear rel_deadline.
3. On the first enqueue, enqueue_entity() calls place_entity().
4. Because se->rel_deadline is set, place_entity() treats se->deadline
as a relative deadline and converts it to an absolute deadline by
adding the current vruntime.
5. However, the forked entity's deadline is not a valid inherited
relative deadline for this new scheduling instance, so the conversion
produces an abnormally large deadline.
6. If the task later calls sched_yield(), yield_task_fair() advances
se->vruntime to se->deadline.
7. The inflated vruntime is then used by the following enqueue path,
where the vruntime-derived key can overflow when multiplied by the
entity weight.
8. This corrupts cfs_rq->sum_w_vruntime, breaks EEVDF eligibility
calculation, and can eventually make all entities appear ineligible.
pick_next_entity() may then return NULL unexpectedly, leading to a
later NULL dereference.
A captured trace shows the effect clearly. Before yield, the entity's
vruntime was around:
9834017729983308
After yield_task_fair() executed:
se->vruntime = se->deadline
the vruntime jumped to:
19668035460670230
and the deadline was later advanced further to:
19668035463470230
This shows that the deadline had already become abnormally large before
yield_task_fair() copied it into vruntime.
rel_deadline is only meaningful when se->deadline really carries a
relative deadline that still needs to be placed against vruntime. A
freshly forked sched_entity should not inherit or retain this state.
Clear se->rel_deadline in __sched_fork(), together with the other
sched_entity runtime state, so that the first enqueue does not interpret
the new entity's deadline as a stale relative deadline. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pgtable-frag: Fix bad page state in pte_frag_destroy
powerpc uses pt_frag_refcount as a reference counter for tracking it's
pte and pmd page table fragments. For PTE table, in case of Hash with
64K pagesize, we have 16 fragments of 4K size in one 64K page.
Patch series [1] "mm: free retracted page table by RCU"
added pte_free_defer() to defer the freeing of PTE tables when
retract_page_tables() is called for madvise MADV_COLLAPSE on shmem
range.
[1]: https://lore.kernel.org/all/[email protected]/
pte_free_defer() sets the active flag on the corresponding fragment's
folio & calls pte_fragment_free(), which reduces the pt_frag_refcount.
When pt_frag_refcount reaches 0 (no active fragment using the folio), it
checks if the folio active flag is set, if set, it calls call_rcu to
free the folio, it the active flag is unset then it calls pte_free_now().
Now, this can lead to following problem in a corner case...
[ 265.351553][ T183] BUG: Bad page state in process a.out pfn:20d62
[ 265.353555][ T183] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20d62
[ 265.355457][ T183] flags: 0x3ffff800000100(active|node=0|zone=0|lastcpupid=0x7ffff)
[ 265.358719][ T183] raw: 003ffff800000100 0000000000000000 5deadbeef0000122 0000000000000000
[ 265.360177][ T183] raw: 0000000000000000 c0000000119caf58 00000000ffffffff 0000000000000000
[ 265.361438][ T183] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
[ 265.362572][ T183] Modules linked in:
[ 265.364622][ T183] CPU: 0 UID: 0 PID: 183 Comm: a.out Not tainted 6.18.0-rc3-00141-g1ddeaaace7ff-dirty #53 VOLUNTARY
[ 265.364785][ T183] Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries
[ 265.364908][ T183] Call Trace:
[ 265.364955][ T183] [c000000011e6f7c0] [c000000001cfaa18] dump_stack_lvl+0x130/0x148 (unreliable)
[ 265.365202][ T183] [c000000011e6f7f0] [c000000000794758] bad_page+0xb4/0x1c8
[ 265.365384][ T183] [c000000011e6f890] [c00000000079c020] __free_frozen_pages+0x838/0xd08
[ 265.365554][ T183] [c000000011e6f980] [c0000000000a70ac] pte_frag_destroy+0x298/0x310
[ 265.365729][ T183] [c000000011e6fa30] [c0000000000aa764] arch_exit_mmap+0x34/0x218
[ 265.365912][ T183] [c000000011e6fa80] [c000000000751698] exit_mmap+0xb8/0x820
[ 265.366080][ T183] [c000000011e6fc30] [c0000000001b1258] __mmput+0x98/0x300
[ 265.366244][ T183] [c000000011e6fc80] [c0000000001c81f8] do_exit+0x470/0x1508
[ 265.366421][ T183] [c000000011e6fd70] [c0000000001c95e4] do_group_exit+0x88/0x148
[ 265.366602][ T183] [c000000011e6fdc0] [c0000000001c96ec] pid_child_should_wake+0x0/0x178
[ 265.366780][ T183] [c000000011e6fdf0] [c00000000003a270] system_call_exception+0x1b0/0x4e0
[ 265.366958][ T183] [c000000011e6fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec
The bad page state error occurs when such a folio gets freed (with
active flag set), from do_exit() path in parallel.
... this can happen when the pte fragment was allocated from this folio,
but when all the fragments get freed, the pte_frag_refcount still had some
unused fragments. Now, if this process exits, with such folio as it's cached
pte_frag in mm->context, then during pte_frag_destroy(), we simply call
pagetable_dtor() and pagetable_free(), meaning it doesn't clear the
active flag. This, can lead to the above bug. Since we are anyway in
do_exit() path, then if the refcount is 0, then I guess it should be
ok to simply clear the folio active flag before calling pagetable_dtor()
& pagetable_free(). |
| OpenProject is open-source, web-based project management software. Prior to 17.3.3 and 17.4.1, cache store poisoning leads to Remote Code Execution (RCE). This vulnerability is fixed in 17.3.3 and 17.4.1. |
