Total
421 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-44463 | 1 Rami | 1 Pretix | 2024-11-21 | 5.3 Medium |
| An issue was discovered in pretix before 2023.7.1. Incorrect parsing of configuration files causes the application to trust unchecked X-Forwarded-For headers even though it has not been configured to do so. This can lead to IP address spoofing by users of the application. | ||||
| CVE-2023-44447 | 2024-11-21 | N/A | ||
| TP-Link TL-WR902AC loginFs Improper Authentication Information Disclosure Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of TP-Link TL-WR902AC routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the httpd service, which listens on TCP port 80 by default. The issue results from improper authentication. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-21529. | ||||
| CVE-2023-44117 | 1 Huawei | 2 Emui, Harmonyos | 2024-11-21 | 7.5 High |
| Vulnerability of trust relationships being inaccurate in distributed scenarios. Successful exploitation of this vulnerability may affect service confidentiality. | ||||
| CVE-2023-41329 | 1 Wiremock | 4 Python Wiremock, Studio, Wiremock and 1 more | 2024-11-21 | 3.9 Low |
| WireMock is a tool for mocking HTTP services. The proxy mode of WireMock, can be protected by the network restrictions configuration, as documented in Preventing proxying to and recording from specific target addresses. These restrictions can be configured using the domain names, and in such a case the configuration is vulnerable to the DNS rebinding attacks. A similar patch was applied in WireMock 3.0.0-beta-15 for the WireMock Webhook Extensions. The root cause of the attack is a defect in the logic which allows for a race condition triggered by a DNS server whose address expires in between the initial validation and the outbound network request that might go to a domain that was supposed to be prohibited. Control over a DNS service is required to exploit this attack, so it has high execution complexity and limited impact. This issue has been addressed in version 2.35.1 of wiremock-jre8 and wiremock-jre8-standalone, version 3.0.3 of wiremock and wiremock-standalone, version 2.6.1 of the python version of wiremock, and versions 2.35.1-1 and 3.0.3-1 of the wiremock/wiremock Docker container. Users are advised to upgrade. Users unable to upgrade should either configure firewall rules to define the list of permitted destinations or to configure WireMock to use IP addresses instead of the domain names. | ||||
| CVE-2023-41134 | 2024-11-21 | 5.3 Medium | ||
| Authentication Bypass by Spoofing vulnerability in pluginkollektiv Antispam Bee allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Antispam Bee: from n/a through 2.11.3. | ||||
| CVE-2023-40702 | 1 Pingidentity | 1 Pingone Mfa Integration Kit | 2024-11-21 | N/A |
| PingOne MFA Integration Kit contains a vulnerability where the skipMFA action can be configured such that user authentication does not require the second factor authentication from the user's existing registered devices. A threat actor might be able to exploit this vulnerability to authenticate as a target user if they have existing knowledge of the target user’s first-factor credentials. | ||||
| CVE-2023-40356 | 2024-11-21 | N/A | ||
| PingOne MFA Integration Kit contains a vulnerability related to the Prompt Users to Set Up MFA configuration. Under certain conditions, this configuration could allow for a new MFA device to be paired with a target user account without requiring second-factor authentication from the target’s existing registered devices. A threat actor might be able to exploit this vulnerability to register their own MFA device with a target user’s account if they have existing knowledge of the target user’s first factor credential. | ||||
| CVE-2023-3243 | 1 Honeywell | 2 Alerton Bcm-web, Alerton Bcm-web Firmware | 2024-11-21 | 8.3 High |
| ** UNSUPPORTED WHEN ASSIGNED ** [An attacker can capture an authenticating hash and utilize it to create new sessions. The hash is also a poorly salted MD5 hash, which could result in a successful brute force password attack. Impacted product is BCM-WEB version 3.3.X. Recommended fix: Upgrade to a supported product such as Alerton ACM.] Out of an abundance of caution, this CVE ID is being assigned to better serve our customers and ensure all who are still running this product understand that the product is end of life and should be removed or upgraded. | ||||
| CVE-2023-3103 | 1 Unitree | 2 A1, A1 Firmware | 2024-11-21 | 8 High |
| Authentication bypass vulnerability, the exploitation of which could allow a local attacker to perform a Man-in-the-Middle (MITM) attack on the robot's camera video stream. In addition, if a MITM attack is carried out, it is possible to consume the robot's resources, which could lead to a denial-of-service (DOS) condition. | ||||
| CVE-2023-37865 | 2024-11-21 | 5.3 Medium | ||
| Authentication Bypass by Spoofing vulnerability in IP2Location Download IP2Location Country Blocker allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Download IP2Location Country Blocker: from n/a through 2.29.1. | ||||
| CVE-2023-30950 | 1 Palantir | 1 Foundry Campaigns | 2024-11-21 | 6.5 Medium |
| The foundry campaigns service was found to be vulnerable to an unauthenticated information disclosure in a rest endpoint | ||||
| CVE-2023-30803 | 1 Sangfor | 1 Next-gen Application Firewall | 2024-11-21 | 9.8 Critical |
| The Sangfor Next-Gen Application Firewall version NGAF8.0.17 is vulnerable to an authentication bypass vulnerability. A remote and unauthenticated attacker can bypass authentication and access administrative functionality by sending HTTP requests using a crafted Y-forwarded-for header. | ||||
| CVE-2023-28803 | 1 Zscaler | 1 Client Connector | 2024-11-21 | 5.9 Medium |
| An authentication bypass by spoofing of a device with a synthetic IP address is possible in Zscaler Client Connector on Windows, allowing a functionality bypass. This issue affects Client Connector: before 3.9. | ||||
| CVE-2023-22474 | 1 Parseplatform | 1 Parse-server | 2024-11-21 | 8.7 High |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Parse Server uses the request header `x-forwarded-for` to determine the client IP address. If Parse Server doesn't run behind a proxy server, then a client can set this header and Parse Server will trust the value of the header. The incorrect client IP address will be used by various features in Parse Server. This allows to circumvent the security mechanism of the Parse Server option `masterKeyIps` by setting an allowed IP address as the `x-forwarded-for` header value. This issue has been patched in version 5.4.1. The mechanism to determine the client IP address has been rewritten. The correct IP address determination now requires to set the Parse Server option `trustProxy`. | ||||
| CVE-2023-20246 | 2 Cisco, Snort | 3 Firepower Threat Defense, Ios Xe, Snort | 2024-11-21 | 5.8 Medium |
| Multiple Cisco products are affected by a vulnerability in Snort access control policies that could allow an unauthenticated, remote attacker to bypass the configured policies on an affected system. This vulnerability is due to a logic error that occurs when the access control policies are being populated. An attacker could exploit this vulnerability by establishing a connection to an affected device. A successful exploit could allow the attacker to bypass configured access control rules on the affected system. | ||||
| CVE-2023-20245 | 1 Cisco | 2 Adaptive Security Appliance Software, Firepower Threat Defense | 2024-11-21 | 5.8 Medium |
| Multiple vulnerabilities in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. These vulnerabilities are due to a logic error that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit these vulnerabilities by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to bypass the interface ACL and access resources that would should be protected. | ||||
| CVE-2022-48513 | 1 Huawei | 2 Emui, Harmonyos | 2024-11-21 | 9.8 Critical |
| Vulnerability of identity verification being bypassed in the Gallery module. Successful exploitation of this vulnerability may cause out-of-bounds access. | ||||
| CVE-2022-42983 | 1 Anji-plus | 1 Aj-report | 2024-11-21 | 8.8 High |
| anji-plus AJ-Report 0.9.8.6 allows remote attackers to bypass login authentication by spoofing JWT Tokens. | ||||
| CVE-2022-41798 | 1 Kyocera | 80 Ecosys M2535dn, Ecosys M2535dn Firmware, Ecosys M6526cdn and 77 more | 2024-11-21 | 6.5 Medium |
| Session information easily guessable vulnerability exists in Kyocera Document Solutions MFPs and printers, which may allow a network-adjacent attacker to log in to the product by spoofing a user with guessed session information. Affected products/versions are as follows: TASKalfa 7550ci/6550ci, TASKalfa 5550ci/4550ci/3550ci/3050ci, TASKalfa 255c/205c, TASKalfa 256ci/206ci, ECOSYS M6526cdn/M6526cidn, FS-C2126MFP/C2126MFP+/C2026MFP/C2026MFP+, TASKalfa 8000i/6500i, TASKalfa 5500i/4500i/3500i, TASKalfa 305/255, TASKalfa 306i/256i, LS-3140MFP/3140MFP+/3640MFP, ECOSYS M2535dn, LS-1135MFP/1035MFP, LS-C8650DN/C8600DN, ECOSYS P6026cdn, FS-C5250DN, LS-4300DN/4200DN/2100DN, ECOSYS P4040dn, ECOSYS P2135dn, and FS-1370DN. | ||||
| CVE-2022-3337 | 1 Cloudflare | 1 Warp Mobile Client | 2024-11-21 | 6.7 Medium |
| It was possible for a user to delete a VPN profile from WARP mobile client on iOS platform despite the Lock WARP switch https://developers.cloudflare.com/cloudflare-one/connections/connect-devices/warp/warp-settings/#lock-warp-switch feature being enabled on Zero Trust Platform. This led to bypassing policies and restrictions enforced for enrolled devices by the Zero Trust platform. | ||||