| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA: During rereg_mr ensure that REREG_ACCESS is compatible
If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be
re-evaluated to ensure it is properly pinned as RW. Since the umem is
hidden inside each driver's mr struct add a ib_umem_check_rereg() function
that each driver has to call before processing IB_MR_REREG_ACCESS.
mlx4 has to retain its duplicate ib_access_writable check because it
implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items
in place sequentially while the MR is live, so it will continue to not
support this combination. |
| A flaw has been found in arc53 DocsGPT up to 0.18.0. The affected element is the function encrypt_credentials of the file application/security/encryption.py of the component Credential Storage. This manipulation causes insufficient verification of data authenticity. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is described as difficult. The exploit has been published and may be used. The pull request to fix this issue awaits acceptance. |
| A vulnerability was detected in skypilot-org skypilot up to 0.12.0. Impacted is the function username.encode of the file sky/users/server.py of the component User ID Handler. The manipulation results in use of weak hash. The attack may be performed from remote. This attack is characterized by high complexity. The exploitability is considered difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure. |
| Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg-msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a single element actually occupies 28 bytes) passes the guard yet causes a fixed-size out-of-bounds write of up to one cmsg header (~12 bytes) past the end of the buffer. Under CONFIG_USERSPACE the recvmsg verifier allocates a kernel-heap copy of the control buffer sized to msg_controllen and runs the implementation against it, so the overflow corrupts kernel heap memory and is triggerable from an unprivileged userspace thread; in supervisor mode it corrupts the caller's buffer. The path is reachable on a UDP/IP socket with IP_PKTINFO/IPV6_RECVPKTINFO (or hoplimit/timestamping) enabled when the application calls recvmsg() with an undersized control buffer and a datagram is received; part of the overwritten bytes (the destination IP in ipi_addr) is influenced by the received packet. The fix makes the capacity check use NET_CMSG_SPACE(pktinfo_len) (aligned header + aligned data) and returns -ENOMEM when the buffer is too small. Affected: v3.6.0 through v4.4.0. |
| Nmap through 7.99 does not keep the IPv6 extension-header walk within the captured packet in ipv6_get_data_primitive (libnetutil/netutil.cc), so the pointer advances past the buffer and the remaining-length computation underflows to a large value. A scanned target or on-path attacker returning a crafted IPv6 response with a truncated extension header can trigger out-of-bounds reads and a crash during raw IPv6 scans. |
| Flowise before 3.1.3 validates Custom MCP stdio environment variables against a denylist using a case-sensitive comparison, so on Windows, where environment names are case-insensitive, supplying 'node_options' bypasses the NODE_OPTIONS denylist entry. An authenticated user who can configure a Custom MCP node can thereby inject NODE_OPTIONS --require and execute arbitrary code in the Flowise server context. |
| RustDesk gates incoming control messages on per-capability flags rather than on the session's authorized connection type, and a file-transfer session does not clear those flags. A peer holding only a valid FileTransfer authorization can inject keyboard and mouse input and reach the unguarded screenshot and display-capture handlers, acting outside its granted scope. |
| nghttp2's nghttpx proxy through 1.69.0 forwards an HTTP/1.1 Upgrade request that also carries a Content-Length header and body onto reusable keep-alive backend connections, re-adding the Upgrade and Connection headers while passing Content-Length verbatim. A backend that resolves the resulting ambiguous message in the attacker's favor enables HTTP request/response smuggling and cross-client response-queue poisoning. |
| MyBB 1.8.40 does not restrict which usergroup a limited Admin Control Panel user may assign when creating or editing users; the user module offers the Administrators group (gid 4) and its datahandler's verify_usergroup() unconditionally returns true. An admin holding only the delegated user-management permission can assign the Administrators group to an account and escalate to the full Administrator permission set. |
| Gitea act_runner with the Docker backend (through act 0.262.0) passes a workflow's container.options string to the Docker job container's HostConfig and, when configured with privileged: false, forces only the Privileged flag off while merging options such as --pid=host, --cap-add, and --security-opt unchanged. A user who can run a workflow on a Docker-backed runner can create a job container with host namespaces and broad capabilities and escape to the host as root despite privileged mode being disabled. |
| 7-Zip for Windows through 26.02 fails to preserve the Mark-of-the-Web when extracting a crafted RAR5 archive, because its guard that suppresses an archive-supplied Zone.Identifier stream matches the exact name 'Zone.Identifier' while a RAR5 STM record named ':Zone.Identifier:$DATA' is not matched and NTFS canonicalizes it to the same stream, overwriting the propagated Internet-zone marker with ZoneId=0. A second STM record named '::$DATA' overwrites the extracted file's default data stream, letting an attacker defeat SmartScreen/MotW warnings and spoof file content. |
| libssh2 through 1.11.1 grows its publickey list with SSH2_REALLOC but does not zero-initialize new entries before parsing populates them, so a parse failure reaching the cleanup path leaves libssh2_publickey_list_free operating on an uninitialized entry. A malicious SSH server offering the publickey subsystem can use a malformed response to make cleanup free an uninitialized, attacker-influenceable attrs pointer in a connecting libssh2 client. |
| libssh2 through 1.11.1 reads an attacker-controlled 32-bit attribute count from a publickey-subsystem response and uses it in the allocation num_attrs * sizeof(libssh2_publickey_attribute) without bounds checking, so on 32-bit platforms the multiplication overflows to an undersized buffer. A malicious SSH server can then drive the attribute-parsing loop to write past the allocation, causing a heap buffer overflow in a connecting libssh2 client. |
| FFmpeg's RASC video decoder (decode_dlta in libavcodec/rasc.c) performs 32-bit reads and writes at the row cursor before the NEXT_LINE row-boundary check and validates the DLTA region in pixel rather than byte units, so a DLTA run on a PAL8 frame can access several bytes past the row allocation. A crafted media stream using the RASC FourCC, decoded by libavcodec, triggers a bitstream-controlled out-of-bounds heap write and adjacent out-of-bounds read, leading to memory corruption. |
| The Frontend File Manager Plugin plugin for WordPress is vulnerable to Authenticated Arbitrary File Deletion in versions up to and including 23.6. This is due to a case-sensitive bypass of the wpfm_dir_path parameter sanitization in the wpfm_file_meta_update AJAX handler, where supplying WPFM_DIR_PATH in uppercase evades the unset check and is normalized to wpfm_dir_path by sanitize_key() during update_post_meta(), allowing an attacker to overwrite the stored file path with an arbitrary filesystem path that is then passed directly to unlink() in delete_file_locally() without any directory containment validation. This makes it possible for authenticated attackers with Subscriber-level access to delete arbitrary files on the server, including sensitive files such as wp-config.php, potentially leading to full site takeover. |
| Versions of the package pacote from 11.2.7 and before 21.5.1 are vulnerable to Denial of Service (DoS) via the addGitSha function. An attacker can exploit this vulnerability by supplying a specially crafted spec.rawSpec value that triggers the function’s regex replacement and string-manipulation logic, causing excessive CPU consumption and potentially stalling or crashing the process. |
| A vulnerability in Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, remote attacker to conduct server-side request forgery (SSRF) attacks through an affected device.
This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to write files to the underlying operating system that could be used later to elevate to root.
Note: Cisco has assigned this security advisory a Security Impact Rating (SIR) of Critical rather than High as the score indicates. The reason is that exploitation of this vulnerability could result in an attacker elevating privileges to root.
Note: To exploit this vulnerability, the WebDialer service must be enabled. WebDialer is disabled by default. |
| Second, the audio buffer backing a mapping could be freed when the device was closed even though the mapping remained valid. The freed memory could then be reused elsewhere while still accessible through the stale mapping.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). |
| dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). |
| sigqueue(2) was marked as permitted in capability mode with the introduction of Capsicum in 2011, but the implementation of kern_sigqueue did not include a capability mode check restricting signal delivery to the calling process's own PID.
A process in capability mode can use sigqueue(2) to send signals to any process it could signal following standard Unix permissions, bypassing the Capsicum sandbox restriction. A compromised sandboxed process could interfere with other processes, for example by sending SIGKILL or SIGSTOP. This could be any process running as the same user, or any process, for a superuser sandboxed process. |
